欢迎访问《兵工学报》官方网站,今天是 分享到:

兵工学报 ›› 2016, Vol. 37 ›› Issue (8): 1351-1358.doi: 10.3969/j.issn.1000-1093.2016.08.002

• 论文 • 上一篇    下一篇

双侧电驱动履带车辆等效条件积分滑模稳定转向控制

曾庆含1,2, 马晓军1,2, 廖自力1,2, 魏曙光1,2   

  1. (1.装甲兵工程学院 全电化技术重点实验室, 北京 100072;2.装甲兵工程学院 控制工程系, 北京 100072)
  • 收稿日期:2015-11-26 修回日期:2015-11-26 上线日期:2016-09-30
  • 通讯作者: 曾庆含 E-mail:cqh_zgy@163.com
  • 作者简介:曾庆含(1988—),男,博士研究生
  • 基金资助:
    军队院校科技创新项目(12050005)

Stable Steer Control of Electric Drive Tracked Vehicle Based on Equivalent Sliding Mode Technique with Conditional Integrator

ZENG Qing-han1,2, MA Xiao-jun1,2, LIAO Zi-li1,2, WEI Shu-guang1,2   

  1. (1.Laboratory of All-electrization Technology, Academy of Armored Force Engineering, Beijing 100072, China;2.Department of Control Engineering, Academy of Armored Force Engineering, Beijing 100072, China)
  • Received:2015-11-26 Revised:2015-11-26 Online:2016-09-30
  • Contact: ZENG Qing-han E-mail:cqh_zgy@163.com

摘要: 履带车辆转向阻力随行驶状态呈现非线性、大范围变化的现象,且由于车辆惯性大、电机驱动能力有限,易进入深度饱和状态,而双侧电机动力相互独立,要实现车辆全速度范围的稳定转向必须对两侧力矩进行有效控制。针对以上问题,设计了一种横摆角速度控制律。开展转向动力学分析,提出速度、横摆角速度转向控制结构;设计了一种带等效控制项的条件积分滑模控制算法,通过引入等效控制项,提高系统响应速度,减小滑模抖振;通过引入条件积分控制项,使滑模控制项边界层外与经典滑模性能一致,鲁棒性强,边界层内平滑切换为Anti-Windup结构的PI控制,便于消除误差,抑制积分饱和。Matlab与RecurDyn联合仿真表明,提出的算法具备跟踪能力强、抗扰动和饱和、输出控制量平滑的优点,能够实现车辆稳定转向控制。

关键词: 兵器科学与技术, 履带车辆, 电传动, 转向控制, 滑模控制

Abstract: The steer resistance of tracked vehicle has character of nonlinear and wide range change, and the drive system is very likely to be saturated dual to large vehicle inertia and constrained drive torque, while the drive motors of dual-motor tracked vehicle are independent with each other, which leads to regulate the drive torque per side to realize stable steer. In order to improve the stability of steer, the sliding mode technique with conditional integrator is applied to yaw rate control. A velocity-yaw rate steer control structure is developed through dynamics analysis. The equivalent conditional integral sliding mode control(ECISMC) algorithm is designed,which could increase the response speed through equivalent term feed-forward compensation and adopt the robust and rapid discontinuous nature of the sliding control outside boundary layer, enabling smooth transition to a PI control law with anti-windup inside boundary layer to eliminate track error by the conditional integrator approach. Co-simulation of Matlab and RecurDyn shows that the control algorithm has advantages of high precision, robust to disturbance, anti-windup and smooth control input, which could realize stable steer performance.

Key words: ordnance science and technology, tracked vehicle, electric drive, steer control, sliding mode control

中图分类号: