欢迎访问《兵工学报》官方网站,今天是

兵工学报 ›› 2025, Vol. 46 ›› Issue (4): 240058-.doi: 10.12382/bgxb.2024.0058

• • 上一篇    下一篇

基于速度障碍模型的智能汽车轨迹规划控制方法研究

何洋*(), 李刚   

  1. 辽宁工业大学 汽车与交通工程学院, 辽宁 锦州 121001
  • 收稿日期:2024-01-18 上线日期:2025-04-30
  • 通讯作者:
  • 基金资助:
    国家自然科学基金项目(51675257); 辽宁省自然科学基金面上项目(2022-MS-376); 辽宁省教育厅高校基本科研项目(LJ212410154021)

Research on Trajectory Planning Control Method of Intelligent Vehicle Based on Velocity Obstacle Model

HE Yang*(), LI Gang   

  1. College of Automobile and Traffic Engineering, Liaoning University of Technology, Jinzhou 121001, Liaoning, China
  • Received:2024-01-18 Online:2025-04-30

摘要:

为提高智能汽车的避障能力,提出一种基于速度障碍模型的智能汽车轨迹规划控制方法。结合速度障碍法和障碍物膨胀法,建立智能汽车的速度障碍模型,将动态障碍物在速度空间中的运动不确定转化为位置不确定,实现安全裕度根据障碍物尺寸和相对速度自适应调整。为兼顾轨迹跟踪精度和行驶稳定性,根据汽车状态方程、模糊控制原理和模型预测控制原理设计智能汽车模糊模型预测控制器(Fuzzy Model Predictive Control,FMPC)。为验证该方法的有效性,采用仿真软件建立其仿真模型。仿真结果表明:对多个随机的静、动态障碍物均可实现避障,且在避障后快速平稳地跟踪参考轨迹。通过避障稳定性分析得出,目标车速为100km/h,其最大横向速度为4.01km/h,最大横摆角速度为20.8°/s,最大质心侧偏角为2.32°,满足汽车行驶稳定性要求,该方法有效提高了智能汽车的避障能力及其行驶稳定性。

关键词: 避障, 速度障碍, 轨迹规划, 模糊控制

Abstract:

In order to improve the obstacles avoidance ability of intelligent vehicles,an trajectory planning and control method of intelligent vehicles is proposed based on velocity obstacle model.The proposed method is used to establish a velocity obstacle model for intelligent vehicles by combining the velocity obstacle method and obstacle expansion method,The motion uncertainty of dynamic obstacles in the velocity space is transformed into the positional uncertainty,and the safety margin is adaptively adjusted by obstacle size and relative velocity.To balance trajectory tracking accuracy and driving stability,a fuzzy model predictive controller (FMPC) is designed based on the equation of state for vehicle,the fuzzy control principle and the model predictive control principle.A simulation model is established to verify the effectiveness of the proposed method.The simulated results show that the proposed method can be used to avoid the multiple random static and dynamic obstacles,and the reference trajectory can be quickly and smoothly tracked after obstacles avoidance.Based on the analysis of obstacles avoidance stability,it is concluded that the target speed is 100km/h,the maximum lateral speed is 4.01km/h,the maximum yaw rate is 20.8°/s,and the maximum centroid side slip angle is 2.32°,which meet the requirements of driving stability.The proposed method effectively improves the obstacle avoidance ability and driving stability of intelligent vehicles.

Key words: obstacles avoidance, velocity obstacle, trajectory planning, fuzzy control

中图分类号: