[1] Prakash A,Rajasankar J,Anandavalli N,et al. Influence of adhesive thickness on high velocity impact performance of ceramic/metal composite targets[J]. International Journal of Adhesion & Adhesives, 2013, 41(1): 186-197. [2] 言克斌, 黄正祥, 刘荣忠. 射流侵彻陶瓷/橡胶/钢复合靶的数值仿真与实验研究[J]. 高压物理学报, 2014, 28(4): 467-472. YAN Ke-bin, HUANG Zheng-xiang, LIU Rong-zhong. Numerical and experimental research on ceramic/rubber/steel composite armor penetrated by jet[J]. Chinese Journal of High Pressure Phy-sics, 2014, 28(4): 467-472.(in Chinese) [3] Al-Tayeb M M, Abu Bakar B H, Akil H M,et al. Effect of partial replacement of sand by fine crumb rubber on impact load behavior of concrete beam: experiment and nonlinear dynamic analysis[J]. Materials and Structures, 2013, 46(8): 1299-1307. [4] 李淑华, 沈大为, 孙凯, 等. Ti-6Al-4V合金弹着点及其周围组织变化与损伤[J].稀有金属材料与工程, 2013, 42(8): 1703-1706. LI Shu-hua, SHEN Da-wei, SUN Kai, et al. Damage behavior of crater and microstructure evolution of Ti-6Al-4V alloy[J]. Rare Metal Materials and Engineering, 2013, 42(8): 1703-1706. (in Chinese) [5] 蔡一鸣, 李慧中, 梁霄鹏, 等. 7039铝合金靶板侵彻过程中的组织特征及数值模拟[J]. 中国有色金属学报, 2011, 21(5): 975-980. CAI Yi-ming, LI Hui-zhong, LIANG Xiao-peng, et al. Microstructure character and numerical modeling of 7039 aluminum alloy target during impact penetration[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(5): 975-980. (in Chinese) [6] 杨珅, 张从林, 黄尉, 等. 高速弹丸冲击诱发TC4中绝热剪切带的微观结构[J]. 稀有金属材料与工程, 2016, 45(9): 2307-2312. YANG Shen, ZHANG Cong-lin, HUANG Wei, et al. Microstructure of adiabatic shear bands in the TC4 titanium alloy induced by high-speed projectile impact[J]. Rare Metal Materials and Engineering, 2016, 45(9): 2307-2312. (in Chinese) [7] 殷军辉, 郑坚, 倪新华, 等. 弹丸膛内运动过程中弹带表层热软化机理分析[J]. 弹道学报, 2012, 24(2): 106-110. YIN Jun-hui, ZHENG Jian, NI Xin-hua, et al. Mechanism analysis of thermal softening of rotating band surface in process of projectile motion in bore[J]. Journal of Ballistics, 2012, 24(2): 106-110. (in Chinese) [8] 胡邓平, 赵利平, 伍先明, 等. 616装甲防弹钢动态冲击下的性能研究[J]. 兵器材料科学与工程, 2017, 40(2): 96-99. HU Deng-ping, ZHAO Li-ping, WU Xian-ming, et al. Performance of 616 armor steel under dynamic impact condition[J]. Ordnance Material Science and Engineering, 2017, 40(2): 96-99. (in Chinese) [9] 赵鹏程, 俞树荣, 李淑欣, 等. 轴承钢GCr15高速冲击绝热剪切带的研究[J]. 材料科学与工艺, 2016, 24(6): 34-38. ZHAO Peng-cheng, YU Shu-rong, LI Shu-xin, et al. Study on the adiabatic shear band of GCr15 bearing steel under high-strain-rate impact[J]. Materials Science & Technology, 2016, 24(6): 34-38. (in Chinese)
[10] 李俊, 吴强, 于继东, 等. 铁冲击相变的晶向效应[J]. 物理学报, 2017, 66(14):377-384. LI Jun, WU Qiang, YU Ji-dong, et al. Orientation effect of alpha-to-epsilon phase transformation in single-crystal iron[J]. Acta Physica Sinica, 2017, 66(14): 377-384. (in Chinese) [11] 罗荣梅, 黄德武, 杨明川, 等. 杆式穿甲弹侵彻靶板时弹坑表面熔化快凝层研究[J]. 兵工学报, 2015, 36(7): 1167-1175. LUO Rong-mei, HUANG De-wu, YANG Ming-chuan, et al. Research on melted and rapidly solidified layer on the surface of crater penetrated by long tungsten rod[J]. Acta Armamentarii, 2015, 36(7): 1167-1175. (in Chinese) [12] 孙秀荣, 王会珍, 杨平, 等. 不同结构金属高速压缩力学行为及微观剪切结构差异[J]. 金属学报, 2014, 50(4): 387-394. SUN Xiu-rong, WANG Hui-zhen, YANG Ping, et al. Mechanical behaviors and micro-shear structures of metals with different structures by high-speed compression[J]. Acta Metallurgica Sinica, 2014, 50(4): 387-394. (in Chinese) [13] 索涛, 汪存显, 杭超, 等. 材料动态变形中的绝热剪切带研究现状[J]. 机械科学与技术, 2016, 35(1): 1-9. SUO Tao, WANG Cun-xian, HANG Chao, et al. The research status of adiabatic shear band in dynamic deformation[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(1): 1-9. (in Chinese) [14] 陈昊, 陶钢. 铜射流侵彻穿孔处的温度及微观组织研究[J]. 高压物理学报, 2011, 25(4): 344-350. CHEN Hao, TAO Gang. Temperature change and microstructure evolution of the bore penetrated by copper jets[J]. Chinese Journal of High Pressure Physics, 2011, 25(4): 344-350. (in Chinese) [15] 刘胜, 吕攀珂, 张艳朋. 陶瓷复合装甲的结构设计研究[J]. 兵器材料科学与工程, 2011, 34(6): 84-86. LIU Sheng, LYU Pan-ke, ZHANG Yan-peng. Structural design of ceramic composite armor[J]. Ordnance Material Science and Engineering, 2011, 34(6): 84-86. (in Chinese) [16] Mishra B, Ramakrishna B, Jena P K, et al. Experimental stu-dies on the effect of size and shape of holes on damage and microstructure of high hardness armour steel plates under ballistic impact[J]. Materials & Design, 2013, 43: 17-24. [17] Hosseini S B, Beno T, Johansson S, et al. A methodology for temperature correction when using two-color pyrometers-compensation for surface topography and material[J]. Experimental Mechanics, 2014, 54(3): 369-377. [18] 李芮宇, 孙宇新, 周玲, 等. 计及热传导影响对长杆弹侵彻陶瓷靶的数值分析[J]. 爆炸与冲击, 2017, 37(2): 332-338. LI Rui-yu, SUN Yu-xin, ZHOU Ling, et al. Influence of heat transfer on long-rod projectiles penetrating into ceramic targets[J]. Explosion and Shock Waves, 2017, 37(2): 332-338. (in Chinese) [19] 蒋东, 李永池, 余少娟, 等. 钨合金长杆弹侵彻约束AD95陶瓷复合靶[J]. 爆炸与冲击, 2010, 30(1): 91-95. JIANG Dong, LI Yong-chi, YU Shao-juan, et al. Penetration of confined AD95 ceramic composite targets by tungsten long rods[J]. Explosion and Shock Waves, 2010, 30(1): 91-95. (in Chinese) [20] 刘水江, 晏石林, 王天运, 等. 陶瓷/FRP复合靶板抗破片侵彻数值模拟[J]. 武汉理工大学学报, 2010, 32(19): 43-46. LIU Shui-jiang, YAN Shi-lin, WANG Tian-yun, et al. Numerical simulation of the ceramic/FRP composite armor under the fragment penetration[J]. Journal of Wuhan University of Technology, 2010, 32(19): 43-46. (in Chinese) [21] Senthil P P, Singh B B, Kumar K S, et al. Effect of heat treatment on ballistic performance of an armor steel against long rod projectile[J]. International Journal of Impact Engineering, 2015, 80: 13-23. [22] 乔立, 周古昕, 王有祁, 等. 铝合金多层板靶板损伤形式及其微观组织分析[J]. 兵器材料科学与工程, 2009, 32(5): 88-91. QIAO Li, ZHOU Gu-xin, WANG You-qi, et al. Study on damage failure pattern and microstructure analysis of target plate of laminated armor Al alloy[J]. Ordnance Material Science and Engineering, 2009, 32(5): 88-91. (in Chinese) [23] 殷军辉, 郑坚, 倪新华, 等. 弹丸膛内运动过程中弹带塑性变形的宏观与微观机理研究[J]. 兵工学报, 2012, 33(6): 676-681. YIN Jun-hui, ZHENG Jian, NI Xin-hua, et al. Research on macroscopic and microscopic mechanism of plastic deformation of bearing band[J]. Acta Armamentarii, 2012, 33(6): 676-681. (in Chinese)
第39卷 第8期2018 年8月兵工学报ACTA ARMAMENTARIIVol.39No.8Aug.2018
|