喷孔分布对柴油机双ω燃烧系统性能影响的研究

doi:10.3969/j.issn.1000-1093.2015.01.005

兵工学报 ›› 2015, Vol. 36 ›› Issue (1): 33-39.doi: 10.3969/j.issn.1000-1093.2015.01.005

喷孔分布对柴油机双ω燃烧系统性能影响的研究

魏胜利¹，王飞虎¹，陈欢²，冷先银¹

（1.江苏大学汽车与交通工程学院，江苏镇江 212013； 2.东风商用车技术中心，湖北武汉 430056）

收稿日期:2014-04-15 修回日期:2014-04-15 上线日期:2015-03-14
作者简介:魏胜利（1978—），男，副教授，硕士生导师
基金资助:
国家自然科学基金项目（51106065）；内燃机燃烧学国家重点实验室开放课题项目(k2013-7)；江苏大学青年骨干教师培养工程项目（江大校［2011］277号）

Research on Effect of Nozzle Hole Distribution on Performance of Combustion System with Double ω CombustionChamber for Diesel Engine

WEI Sheng-li¹, WANG Fei-hu¹, CHEN Huan² ， LENG Xian-yin¹

(1.School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013，Jiangsu，China;2Dongfeng Commercial Vehicle Technical Center, Wuhan 430056，Hubei，China)

Received:2014-04-15 Revised:2014-04-15 Online:2015-03-14

摘要/Abstract

摘要： 为了改善柴油机喷雾空间分布，提高缸内混合气形成质量，提出了双ω型燃烧室及与之相匹配的双排喷孔的燃烧系统。应用AVL FIRE软件对不同喷孔分布形式的双ω型燃烧室缸内喷雾、混合气形成和燃烧过程进行数值模拟，分析了喷孔分布形式对缸内当量比分布和温度场及燃烧与排放特性的影响。研究结果表明：适当增加上排喷孔的数目能够有效提高混合气形成质量，改善燃烧过程；采用上排5个、下排3个的喷孔分布形式能够获得较低的氮氧化物和碳烟颗粒排放。

关键词: 动力机械工程, 柴油机, 双ω型燃烧室, 双排喷孔, 数值模拟

Abstract: A double ω-combustion chamber matched with a double-row nozzle hole combustion system is proposed to improve the spray spatial distribution and the mixture formation quality for diesel engines. The in-cylinder spray, mixture formation and combustion process of the new combustion system are simulated and investigated by using AVL FIRE software. The effects of nozzle hole distribution on the fuel/air equivalence ratio, temperature field and emission characteristics in the chamber are analyzed by changing the spatial distribution of nozzle hole. The results show that the mixture formation quality can be effectively improved by increasing the number of nozzle holes in the upper row, and moreover, the combustion process can be improved. With the spatial distribution of 5 nozzle holes in the upper row and 3 nozzle holes in the lower row, NOx and Soot emissions can be reduced.

Key words: power machinery engineering, diesel engine, double ω combustion chamber, double-row nozzle hole, numerical simulation

中图分类号:

TK421

魏胜利，王飞虎，陈欢，冷先银. 喷孔分布对柴油机双ω燃烧系统性能影响的研究[J]. 兵工学报, 2015, 36(1): 33-39.

WEI Sheng-li, WANG Fei-hu, CHEN Huan ， LENG Xian-yin. Research on Effect of Nozzle Hole Distribution on Performance of Combustion System with Double ω CombustionChamber for Diesel Engine[J]. Acta Armamentarii, 2015, 36(1): 33-39.

参考文献

［1］何学良,李疏松.内燃机燃烧学［M］.北京:机械工业出版社,1990.
HE Xue-liang,LI Shu-song. The combustion theory of internal combustion engine［M］. Beijing:China Machine Press,1990.(in Chinese)
［2］周龙保.内燃机学［M］.第2版.北京:机械工业出版社,2005.
ZHOU Long-bao.Internal combustion engine science ［M］. 2nd ed.Beijing: China Machine Press,2005.(in Chinese)
［3］赵昌普,宋崇林,张延峰,等.涡流运动降低柴油机混合气浓度及碳烟排放的数值分析［J］. 燃烧科学与技术，2004,10(6):489-496.
ZHAO Chang-pu, SONG Chong-lin, ZHANG Yan-feng, et al. Numerical analysis of reduction in mixture concentration and Soot emissions in a diesel engine by swirl［J］. Journal of Combustion Science and Technology, 2004,10(6):489-496.(in Chinese)
［4］赵昌普，苏万华.计算网格与湍流模型对柴油喷雾多维数值模拟结果的影响［J］.天津大学学报，2004,37(11):965-969.
ZHAO Chang-pu,SU Wan-hua. Effects of the computation mesh and turbulence model on multi-dimensional numerical simulation results of a diesel spray［J］. Journal of Tianjin University, 2004,37(11):965-969.(in Chinese)
［5］刘永长.内燃机热力过程模拟［M］.北京:机械工业出版社,2000.
LIU Yong-chang. Thermal process simulation of internal combustion engine［M］. Beijing:China Machine Press,2000.(in Chinese)
［6］ AVL LIST GmbH. AVL FIRE 2008 manual spray［M］. Graz, Austria: AVL LIST GmbH, 2004.
［7］ Sazhin S S, Sazhina E M, Heikal M R, et al. The shell auto ignition model: a new mathematical formulation［J］.Combustion and Flame,1999,117(3): 529-540.
［8］ Bensler H, Bühren F, Samsone E, et al. 3-D CFD analysis of the combustion process in a DI diesel engine using a flamelet model, SAE Paper 2000-01-0662［R］. Detroit, Michigan: SAE 2000 World Congress, 2000.
［9］ Patferson M A, Reitz R D. Modeling the effects of fuel spray characteristics on diesel engine combustion and emission, SAE Technical Paper 980131［R］. Detroit, Michigan: International Congress & Exposition, 1998.
［10］冯立岩,隆武强,魏胜利,等.新型伞状喷雾柴油预混合压燃数值模拟研究［J］.内燃机学报,2006,24(2): 134-140.
FENG Li-yan, LONG Wu-qiang, WEI Sheng-li, et al. Numerical simulation on new conical spray and combustion for diesel homogeneous charge compression ignition［J］. Transactions of CSICE, 2006,24(2): 134-140.(in Chinese)

[1]	严泽臣，岳松林，邱艳宇，王建平，赵跃堂，施杰，李旭. 水下爆炸冲击波反射压力计算方法的改进[J]. 兵工学报, 2024, 45(4): 1196-1207.
[2]	李婧, 孙晓霞, 马兴龙, 朱文祥. 开孔泡沫金属传热和流动特性[J]. 兵工学报, 2024, 45(1): 122-130.
[3]	康耕新, 颜海春, 张亚栋, 刘明君, 郝礼楷. 接触爆炸下混凝土墩破坏效应试验与数值模拟[J]. 兵工学报, 2024, 45(1): 144-155.
[4]	雷娟棉, 高毅, 勇政. 旋转导弹横向喷流干扰特性数值模拟[J]. 兵工学报, 2024, 45(1): 105-121.
[5]	王新宇, 姜春兰, 王在成, 方远德. 烤燃条件下JEO聚能装药战斗部泄压结构研究[J]. 兵工学报, 2024, 45(1): 1-14.
[6]	雷特, 武郁文, 徐高, 邱彦铭, 康朝辉, 翁春生. 基于大涡模拟方法的三维旋转爆轰流场结构研究[J]. 兵工学报, 2024, 45(1): 85-96.
[7]	周广盼, 王荣, 王明洋, 丁建国, 张国凯. 涂覆聚脲混凝土自锚式悬索桥主梁抗爆性能试验与数值模拟[J]. 兵工学报, 2023, 44(S1): 9-25.
[8]	寇永锋, 杨坤, 张斌, 肖迤文, 鲁建英, 陈朗. 基于烤燃实验和数值模拟的战斗部装药热安全性[J]. 兵工学报, 2023, 44(S1): 41-49.
[9]	余双洋, 彭永. 4340钢弹侵彻45号钢靶的温升数值模拟[J]. 兵工学报, 2023, 44(S1): 144-151.
[10]	余雯君, 陈胜云, 邓树新, 于冰冰, 晋冬艳. 爆炸冲击波在变向通道中传播规律数值模拟[J]. 兵工学报, 2023, 44(S1): 180-188.
[11]	杜永刚, 王雪松, 万志华. 助飞运载器螺旋传动失效的机理研究[J]. 兵工学报, 2023, 44(7): 2033-2040.
[12]	高铁锁, 江涛, 傅杨奥骁, 丁明松, 刘庆宗, 董维中, 许勇, 李鹏. 不同尺度飞行器周围等离子体分布及电磁波传输效应[J]. 兵工学报, 2023, 44(6): 1809-1819.
[13]	唐奎, 王金相, 刘亮涛, 杨明. 长杆弹二次侵彻机理及影响因素研究[J]. 兵工学报, 2023, 44(12): 3707-3718.
[14]	成乐乐, 黄风雷, 武海军, 田思晨, 陈文戈. 水下爆炸作用下多舱室结构的动力响应及损伤特性[J]. 兵工学报, 2023, 44(12): 3562-3579.
[15]	潘腾, 卞晓兵, 袁名正, 王亮亮, 黄元, 黄广炎, 张宏. 爆炸冲击波作用下聚氨酯-半球夹芯结构的动态响应[J]. 兵工学报, 2023, 44(12): 3580-3589.

喷孔分布对柴油机双ω燃烧系统性能影响的研究

Research on Effect of Nozzle Hole Distribution on Performance of Combustion System with Double ω CombustionChamber for Diesel Engine

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价