弹壳体结构对燃料装药抛撒速率影响的数值模拟研究

doi:10.3969/j.issn.1000-1093.2017.01.006

摘要/Abstract

摘要： 为研究壳体结构对燃料近区抛撒速率的影响，利用LS-DYNA程序，分别对无加强杆结构和有加强杆结构的中心抛撒药驱动燃料抛撒和壳体破坏过程进行数值模拟，并与试验结果进行了对比，得到了燃料边界初始膨胀状态、壳体破裂过程和刻槽应力随时间变化的规律，以及不同结构对燃料抛撒最大速率的影响。研究结果表明：在满足结构强度的要求且径向强度相同的情况下，加强壳体的轴向拉力，能够有效提高燃料抛撒速率；在相同的中心药量/燃料量的情况下进行抛撒，当轴向拉力提高0.7×10⁶ N时，有加强杆结构较无加强杆结构有利于获得较大的抛撒速率，有加强杆结构的燃料最大抛撒速率可达316.3 m/s,无加强杆结构的燃料最大抛撒速率为285.3 m/s，燃料抛撒最大速率提高了10.8%.

关键词: 兵器科学与技术, 有加强杆结构, 无加强杆结构, 抛撒速率, 数值模拟

Abstract: In order to study the dispersal characteristics for different shell structures, the processes of fuel dispersion and shell breakage driven by central explosive are simulated by LS-DYNA code, and the simulated and experimental results are compared. The boundary expansionstate of fuel and the process of shell breakage are obtained. The variation of cutting force with time and the maximum dispersing velocity of different shell structures are analyzed. Results show that the dispersing velocity of fuel could be effectively increased by enhancing the axial tension while satisfying the structural strength and the same radial strength. When axial tension is up to 0.7×10⁶ N, the greater dispersing velocity could be produced by stiffener structure. The maximum dispersing velocity of non-stiffener structure is 285.3 m/s. The maximum dispersing velocity of stiffener structure is 316.3 m/s, that could be increased by 10.8% with the same dose for non-stiffener structure. Key

Key words: ordnancescienceandtechnology, stiffenerstructure, non-stiffenerstructure, dispersalvelocity, numericalsimulation

中图分类号:

TJ410.3⁺3

王晔，白春华，李建平. 弹壳体结构对燃料装药抛撒速率影响的数值模拟研究[J]. 兵工学报, 2017, 38(1): 43-49.

WANG Ye， BAI Chun-hua， LI Jian-ping. Influence of shell Structure on Dispersing Velocity of Fuel-air Mixture[J]. Acta Armamentarii, 2017, 38(1): 43-49.

参考文献

［1］国家煤矿安全监察局事故查询系统[DB/OL]. http:∥media.chinasafety.gov.cn:8090/isystem/shigumain.jsp.
Accident inquiry system of national coal mine safety supervision bureau[DB/OL]. http:∥media.chinasafety.gov.cn:8090/isystem/shigumain.jsp.(in Chinese)
[2］张国顺. 中国兵器工业安全生产50年[J].兵工安全技术, 2000(2): 5-9.
ZHANG Guo-shun. The safe production of China's weapons industry in 50 years[J]. Ordnance Safety Technology, 2000(2):5-9. (in Chinese)
[3］王莹, 马富学. 新概念武器原理[M]. 北京:兵器工业出版社, 1997:485-488.
WANG Ying, MA Fu-xue. The theory of new concept weapon[M]. Beijing: Publishing House of Ordnance Industry, 1997:485-488. (in Chinese)
[4］ Rao A A. Fuel air explosives[J]. Defence Science Journal, 1987, 37(1):23-28.
[5］ Liu G, Hou F, Cao B, et al. Experimental study of fuel-air explosive[J]. Combustion, Explosion and Shock Waves, 2008, 44(2): 213-217.
[6］ Zhang Q, Bai C H, Dang H Y, et al. Critical ignition temperature of fuel-air explosive[J]. Defence Science Journal, 2004, 54(4):469-474.
[7］ Apparaoa A, Rao C R, Tewari S P. Studies on formation of unconfined detonable vapor cloud using explosive means[J]. Journal of Hazard Material, 2013, 254/255:214-220.
[8］ Qi Z, Kezhen W, Aimin L, et al. Numerical simulation on dispersal character of fuel by central HE[J]. Defence Science Journal, 2007, 57(4):425-433.
[9］陈明生, 白春华, 李建平. 燃料抛撒的初始速率与结构动态响应数值模拟[J].含能材料, 2015, 23(4):323-329.
CHEN Ming-sheng, BAI Chun-hua, LI Jian-ping. Simulation on initial velocity and structure dynamic response for fuel dispersion[J]. Chinese Journal of Energetic Materials, 2015, 23(4):323-329. (in Chinese)

[10］李建平, 白春华, 郭昭平. 云爆装置初始作用过程数值模拟[J]. 弹箭与制导学报, 2009, 29(5):123-125.
LI Jian-ping, BAI Chun-hua, GUO Zhao-ping. Numerical simulation of the initial interaction process of FAE device[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2009, 29(5):123-125.(in Chinese)
[11］王飞, 白春华, 闫华. 壳体厚度对大口径FAE战斗部效应仿真研究[J]. 弹箭与制导学报, 2003, 23(3):110-112.
WANG Fei, BAI Chun-hua, YAN Hua. The study for the effect of the thickness of cylindrical shell on the fuel dispersing in the FAE warhead design by simulation[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2003, 23(3):110-112.(in Chinese)
[12］ Liu Q M, Bai C H. Research on the explosion temperature response of fuel air explosive measured by colorimetric pyrometer[J]. Journal of China Ordnance, 2010, 6(1):59-64.
[13］ Leyer J C. An experimental study of pressure fields by exploding cylindrical clouds[J]. Combustion & Flame, 1982, 48(3):251-263.
[14］ Fishburn B, Slagg N, Lu P. Blast effect from a pancake shaped fuel drop-air cloud detonation(theory and experiment)[J]. Journal Hazard Material, 1981, 5(1/2):65-75.
[15］李斌, 解立峰, 韩志伟, 等.激波驱动下固体颗粒抛撒的实验研究[J]. 实验力学, 2012, 27(6):715-720.
LI Bin, XIE Li-feng, HAN Zhi-wei, et al. Experimental study of solid particles dispersal induced by shock wave[J]. Journal of Experimental Mechanics, 2012, 27(6):715-720.(in Chinese)
[16］闫华, 张奇, 白春华. 发射过载条件下燃料应力状态的数值计算[J]. 兵工学报, 2005, 26(5): 609-614.
YAN Hua, ZHANG Qi, BAI Chun-hua. Numerical simulation for stress in fuel under launching over loading[J]. Acta Armamentarii, 2005, 26(5):609-614.(in Chinese)
[17］丁珏, 刘家骢. 液体燃料爆炸抛撒和FAE 形成过程的数值模拟[J]. 南京理工大学学报, 2000, 24(2):168-171.
DING Jue, LIU Jia-cong. Numerical simulation on the process ofexplosive dispersal for forming FAE cloud[J]. Journal of Nanjing University of Science and Technology, 2000, 24(2):168-171.(in Chinese)
[18］李斌, 解立峰, 倪欧琪, 等. 燃料液滴云雾爆轰特性研究[J]. 弹道学报, 2010, 22(2):90-93.
LI Bin, XIE Li-feng, NI Ou-qi, et al. Study on detonation characteristics of fuel drops cloud[J]. Journal of Ballistics, 2010, 22(2):90-93.(in Chinese)
[19］沈晓波, 鲁长波, 李斌, 等, 液体燃料云雾爆轰参数实验[J].爆炸与冲击, 2012, 32(1):108-112.
SHEN Xiao-bo, LU Chang-bo, LI Bin, et al. An experimental study of detonation parameters of liquid fuel drops cloud[J]. Explosion and Shock Waves, 2012, 32(1):108-112.(in Chinese)
[20］李席, 王伯良, 韩早, 等. 液固复合FAE 云雾状态影响因素的试验研究[J]. 爆破器材, 2013, 42(5): 23 -26.
LI Xi, WANG Bo-liang, HAN Zao, et al. Experimental study on influencing factors of the cloud status of liquid-solid fuel air explosive[J]. Explosive Materials, 2013, 42(5):23-26.(in Chinese)
[21］李斌, 解立峰, 韩志伟, 等.激波作用下水膜变形和雾化实验研究[J]. 实验力学, 2011, 26(4):464-470.
LI Bin, XIE Li-feng, HAN Zhi-wei，et al. Study on water films induced by shock wave[J]. Journal of Experimental Mechanics, 2011, 26(4):464-470.(in Chinese)
[22］薛社生, 刘家骢, 秦承森, 等. 燃料爆炸抛撒成雾的实验与数值研究[J]. 爆炸与冲击, 2001, 21(4): 272-276.
XUE She-sheng, LIU Jia-cong, QIN Cheng-sen, et al. Experimental and numerical investigation on explosive dispersal and cloud forming[J]. Explosion and Shock Waves, 2001, 21(4):272-276. (in Chinese)
[23］祝燮权. 实用五金手册[M]. 上海:上海科学技术出版社, 2000.
ZHU Xie-quan. Practical hardware manual[M]. Shanghai: Shanghai Scientific & Technical Publishers, 2000. (in Chinese)

第38卷
第1期2017 年1月兵工学报ACTA
ARMAMENTARIIVol.38No.1Jan.2017

[1]	吕代龙，陈少松，徐一航，邱佳伟. 近距耦合鸭式布局导弹气动特性[J]. 兵工学报, 2022, 43(6): 1316-1325.
[2]	徐干成，袁伟泽，陈林恒，李成学，颉旭虎，聂梦琪. NFB700高强钢板抗震塌性能[J]. 兵工学报, 2022, 43(2): 391-400.
[3]	路宽，饶翔，王花梅，张倩. 不同形式锚泊系统对海洋资料浮标水动力性能的影响[J]. 兵工学报, 2022, 43(1): 120-130.
[4]	程申申，陶如意，王浩，薛绍，林庆育. 弹丸不同结构尼龙弹带挤进过程的阻力特性[J]. 兵工学报, 2021, 42(9): 1847-1857.
[5]	王丹宇，南风强，廖昕，肖忠良，堵平，王彬彬. 考虑化学反应的大口径火炮炮口流场特性[J]. 兵工学报, 2021, 42(8): 1624-1630.
[6]	檀妹静，杨光，李宇，周禹，曹占伟，闫昊，檀姊静. 整流帽布局对全动舵附近流动结构及热环境分布规律的影响[J]. 兵工学报, 2021, 42(8): 1648-1659.
[7]	程远胜，谢杰克，李哲，刘均，张攀. 冲击波和破片群联合作用下高强聚乙烯/泡沫铝夹芯复合结构毁伤响应特性[J]. 兵工学报, 2021, 42(8): 1753-1762.
[8]	刘清扬，雷娟棉. 跨速域大后掠角近距耦合翼气动干扰特性[J]. 兵工学报, 2021, 42(7): 1412-1423.
[9]	杜华池，张先锋，刘闯，熊玮，李鹏程，陈海华. 弹体斜侵彻多层间隔钢靶的弹道特性[J]. 兵工学报, 2021, 42(6): 1204-1214.
[10]	王孟鑫，陈睿颖，王金相. 破片与冲击波联合作用下多孔泡沫铝夹芯复合材料板的防护性能[J]. 兵工学报, 2021, 42(5): 1041-1052.
[11]	佟鼎，田红艳，刘欣源，刘烨，高超，李欣. 进气弯管对离心压气机特性影响及弯管结构优化[J]. 兵工学报, 2021, 42(4): 706-714.
[12]	姜冬冬，薛晓春. 整装式液体发射药燃烧推进过程的内弹道特性[J]. 兵工学报, 2021, 42(4): 755-763.
[13]	郭登刚, 周强, 刘睿, 陈鹏万. 铝-镁-铝轻质金属层状复合靶抗弹性能[J]. 兵工学报, 2021, 42(3): 598-606.
[14]	孙晓旺，张进成，彭兵，章金坤，王显会. 军用车辆底部爆炸冲击下载员下肢保护装置设计与优化[J]. 兵工学报, 2021, 42(12): 2555-2564.
[15]	彭嘉诚, 蒋建伟, 廖伟, 卢易浩. 火箭发动机与尾翼座共用尾翼结构在高膛压火炮膛内间隙影响因素[J]. 兵工学报, 2021, 42(12): 2586-2596.