喷射压力变化对脉冲等离子射流扩展特性的影响

doi:10.3969/j.issn.1000-1093.2016.09.010

兵工学报 ›› 2016, Vol. 37 ›› Issue (9): 1617-1623.doi: 10.3969/j.issn.1000-1093.2016.09.010

喷射压力变化对脉冲等离子射流扩展特性的影响

赵雪维¹，余永刚¹，莽珊珊²

（1.南京理工大学能源与动力工程学院，江苏南京 210094; 2.南京理工大学理学院，江苏南京 210094）

收稿日期:2016-01-20 修回日期:2016-01-20 上线日期:2016-11-04
通讯作者: 赵雪维 E-mail:514108001741@njust.edu.cn
作者简介:赵雪维（1991—），女，硕士研究生
基金资助:
国家自然科学基金青年基金项目（51506094）

Influence of Injection Pressure Change on Expansion Characteristics of Pulsed Plasma Jet

ZHAO Xue-wei¹， YU Yong-gang¹， MANG Shan-shan²

(1.School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China;2.School of Science, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China)

Received:2016-01-20 Revised:2016-01-20 Online:2016-11-04
Contact: ZHAO Xue-wei E-mail:514108001741@njust.edu.cn

摘要/Abstract

摘要： 为分析喷射压力变化对脉冲等离子射流扩展特性的影响，建立脉冲等离子射流在空气中扩展的二维轴对称非稳态模型，并进行数值模拟。研究了1.5~3.5 MPa喷射压力范围内，脉冲等离子射流在空气中扩展时的两相界面演化特性及流场参数变化规律，并与实验结果进行对比。研究结果表明：脉冲等离子射流的轴向扩展位移模拟值与实验值较为吻合；喷嘴出口处，射流场参数骤变，近场处参数变化较为剧烈，后期逐渐衰减至环境参数；喷射压力增大时，脉冲等离子射流的扩展体积、马赫盘大小及压力等流场参数均随之增大，扩展过程中的湍流掺混现象也随之增强，表现为等离子体与空气两相界面破碎加剧；喷射压力减小到1 MPa时，喷嘴近场无马赫盘出现。

关键词: 兵器科学与技术, 电热化学发射, 等离子射流, 喷射压力, 扩展特性, 数值模拟

Abstract: To analyze the influence of injection pressure on the expansion characteristics of pulsed plasma jet, a two-dimensional axisymmetric unsteady model for pulsed plasma jet expansion in air is established, and the numerical simulation of this process is carried out. The evolution characteristics of two-phase interface and the variation of flow field parameters of pulsed plasma jet in air are studied in the range of 1.5~ 3.5 MPa jet pressure, then compared with the experiments. Results show that the simulation values of axial expansion displacement of pulsed plasma jet are in good agreement with the experimental results. The parameters of the jet field are mutated at the nozzle exit, the pulse decays near the nozzle, and then it gradually decays to environmental parameters. When the injection pressure increases, the parameters of flow field, such as the expansion volume of pulsed plasma jet, the size of Mach disk and the pressure, increase, and the turbulent mixing in the expansion process is also enhanced, which is characterized by the more fracture of the interface of the plasma and air. When the injection pressure reduces to 1 MPa, no Maher disk appears at nozzle.

Key words: ordnance science and technology, electrothermal chemical launch, plasma jet, injection pressure, extended property, numerical simulation

中图分类号:

TJ399

赵雪维，余永刚，莽珊珊. 喷射压力变化对脉冲等离子射流扩展特性的影响[J]. 兵工学报, 2016, 37(9): 1617-1623.

ZHAO Xue-wei， YU Yong-gang， MANG Shan-shan. Influence of Injection Pressure Change on Expansion Characteristics of Pulsed Plasma Jet[J]. Acta Armamentarii, 2016, 37(9): 1617-1623.

参考文献

［1］李贞晓，张亚舟，高梁，等. 电热化学发射中硅堆故障试验分析[J].兵工学报, 2015, 36(4):577-581.
LI Zhen-xiao, ZHANG Ya-zhou, GAO Liang, ea al. Test and analysis of silicon stack failure in electrothermal-chemical launch[J].Acta Armamentarii, 2015, 36(4):577-581. (in Chinese)
[2］ Ying W, Marshall R A, Shukang C. Physics of electric launch[M].Beijing:Science Press, 2004:351-353.
[3］狄加伟，杨敏涛，张明安，等. 电热化学发射技术在大口径火炮上的应用前景[J].火炮发射与控制学报, 2010, 31 (2):24-27.
DI Jia-wei, YANG Min-tao, ZHANG Ming-an, et al. Electrothermal-chemical launcher technology in large caliber gun[J]. Journal of Gun Launch & Control, 2010, 31(2):24-27. (in Chinese)
[4］金涌. 电热等离子体对固体火药的辐射点火及燃烧特性研究[D]. 南京:南京理工大学, 2014.
JIN Yong. Study on radiation ignition and combustion characteristic of solid propellant by elactrothermal plasma [D]. Nanjing: Nanjing University of Science and Technology, 2014. (in Chinese)
[5］方叶林. 脉冲放电等离子体电磁特性的初步研究 [D].南京:南京理工大学, 2008.
FANG Ye-lin. Preliminary study on electromagnetic characteristics of pulsed discharge plasma[D].Nanjing: Nanjing University of Science and Technology, 2008. (in Chinese)
[6］ YANG Lei, LIU Xiangyang, WANG Siyu, et al. Different ablation models for the wall-plasma interaction process in pulsed plasma thruster [J].高电压技术，2013, 39(9):2301-2308.
Yang L, Liu X Y, Wang S Y, et al. Different ablation models for the wall-plasma interaction process in pulsed plasma thruster[J].High Voltage Engineering, 2013, 39(9):2301-2308. (in English)
[7］ Suk H, Kim J U. Characterization of a high-density plasma produced by electrothermal capillary discharge[J].Applied Physics Letters, 2002, 80(3):368-370.
[8］赵文华，刘笛，田阔. 电弧等离子体射流核脉动及射流卷吸的实验研究[J].核聚变与等离子体物理, 2002, 22(1):1-5.
ZHAO Wen-hua, LIU Di, TIAN Kuo. Experimental study onthe fluctuation and engulfment of arc plasma spraying jet[J].Nuclear Fusion and Plasma Physics, 2002, 22(1):1-5. (in Chinese)
[9］赵文华，唐皇哉，田阔，等. 存在空气卷吸时等离子体射流光谱诊断应做的修正[J].光谱学与光谱分析, 2004, 24(4):388-391.
ZHAO Wen-hua, TANG Huang-zai, TIAN Kuo, et al. The correction to spectroscopic diagnostics of plasma jet with air engulfment[J].Spectroscopy and Spectral Analysis, 2004, 24(4):388-391. (in Chinese)
[10］ Chang L M, Howard S L. Influence of pulse length on electrothermal plasma jet impingement flow, ARL-TR-4348[R]. Aberdeen Proving Ground, MD, US:Army Research Laboratory, 2007.
[11］俞永波, 杨兰兰, 屠彦, 等. 氩等离子体射流的摩尔分布和光谱变化研究[J].真空科学与技术学报, 2015, 35(9):1075-1081.
YU Yong-bo, YANG Lan-lan, TU Yan, et al. Mole fraction distribution and spectra variations in argon plasma jet[J].Chinese Journal of Vacuum Science and Technology, 2015, 35(9):1075-1081. (in chinese)
[12］ Nusca M J, McQuaid M J, Anderson W R. Investigation of a high-velocity, multi-species jet undergoing unsteady expansion into open air[C]∥38th AIAA Aerospace Sciences Meeting and Exhibit. Reno, NV:AIAA, 2000.
[13］ Liu B, Zhang T, Gawne D T. Computational analysis of the influence of process parameters on the flow field of a plasma jet[J].Surface and Coatings Technology, 2000, 132(2/3):202-216.
[14］ Kim K. Transient flowfield characteristics of polycarbonate plasma discharge from pulse-powered electrothermal gun operation[J].Journal of Thermal Spray Technology, 2008, 17(4):517-524.
[15］张琦，余永刚，宇文聪伶. 非稳态等离子射流场的二维模型及数值模拟[J].弹道学报, 2012, 24(3):1-5.
ZHANG Qi, YU Yong-gang, YUWEN Cong-ling. Two-dimensional model and numerical simulation of unsteady plasma jet[J].Journal of Ballistics, 2012, 24(3):1-5.(in Chinese)

[1]	吕代龙，陈少松，徐一航，邱佳伟. 近距耦合鸭式布局导弹气动特性[J]. 兵工学报, 2022, 43(6): 1316-1325.
[2]	徐干成，袁伟泽，陈林恒，李成学，颉旭虎，聂梦琪. NFB700高强钢板抗震塌性能[J]. 兵工学报, 2022, 43(2): 391-400.
[3]	路宽，饶翔，王花梅，张倩. 不同形式锚泊系统对海洋资料浮标水动力性能的影响[J]. 兵工学报, 2022, 43(1): 120-130.
[4]	程申申，陶如意，王浩，薛绍，林庆育. 弹丸不同结构尼龙弹带挤进过程的阻力特性[J]. 兵工学报, 2021, 42(9): 1847-1857.
[5]	王丹宇，南风强，廖昕，肖忠良，堵平，王彬彬. 考虑化学反应的大口径火炮炮口流场特性[J]. 兵工学报, 2021, 42(8): 1624-1630.
[6]	檀妹静，杨光，李宇，周禹，曹占伟，闫昊，檀姊静. 整流帽布局对全动舵附近流动结构及热环境分布规律的影响[J]. 兵工学报, 2021, 42(8): 1648-1659.
[7]	程远胜，谢杰克，李哲，刘均，张攀. 冲击波和破片群联合作用下高强聚乙烯/泡沫铝夹芯复合结构毁伤响应特性[J]. 兵工学报, 2021, 42(8): 1753-1762.
[8]	刘清扬，雷娟棉. 跨速域大后掠角近距耦合翼气动干扰特性[J]. 兵工学报, 2021, 42(7): 1412-1423.
[9]	杜华池，张先锋，刘闯，熊玮，李鹏程，陈海华. 弹体斜侵彻多层间隔钢靶的弹道特性[J]. 兵工学报, 2021, 42(6): 1204-1214.
[10]	王孟鑫，陈睿颖，王金相. 破片与冲击波联合作用下多孔泡沫铝夹芯复合材料板的防护性能[J]. 兵工学报, 2021, 42(5): 1041-1052.
[11]	佟鼎，田红艳，刘欣源，刘烨，高超，李欣. 进气弯管对离心压气机特性影响及弯管结构优化[J]. 兵工学报, 2021, 42(4): 706-714.
[12]	姜冬冬，薛晓春. 整装式液体发射药燃烧推进过程的内弹道特性[J]. 兵工学报, 2021, 42(4): 755-763.
[13]	郭登刚, 周强, 刘睿, 陈鹏万. 铝-镁-铝轻质金属层状复合靶抗弹性能[J]. 兵工学报, 2021, 42(3): 598-606.
[14]	孙晓旺，张进成，彭兵，章金坤，王显会. 军用车辆底部爆炸冲击下载员下肢保护装置设计与优化[J]. 兵工学报, 2021, 42(12): 2555-2564.
[15]	彭嘉诚, 蒋建伟, 廖伟, 卢易浩. 火箭发动机与尾翼座共用尾翼结构在高膛压火炮膛内间隙影响因素[J]. 兵工学报, 2021, 42(12): 2586-2596.

喷射压力变化对脉冲等离子射流扩展特性的影响

Influence of Injection Pressure Change on Expansion Characteristics of Pulsed Plasma Jet

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价