[1] 丘尔巴诺夫 E B. 挤进时期内弹道学与挤进压力计算[M]. 杨敬荣,译. 北京:国防工业出版社,1997. Qierbarov E B. Interior ballistics and engraving force calculation during engraving of projectile[M]. YANG Jing-rong, translated. Beijing: National Defense Industry Press, 1997. (in Chinese) [2] 刘俊红, 傅苏黎, 许世蒙. 自润滑弹带接触应力问题的初步计算[J]. 装甲兵工程学院学报, 2003, 17(2):63-66. LIU Jun-hong, FU Su-li, XU Shi-meng. Primary calculation of contact stress of self-lubricated ammunition belts[J]. Journal of Armored Force Engineering Institute, 2003,17(2): 63-66. (in Chinese) [3] 张喜发, 卢兴华. 火炮烧蚀内弹道学[M]. 北京:国防工业出版社,2001. ZHANG Xi-fa, LU Xing-hua. Interior ballistics of erosion guns[M]. Beijing: National Defense Industry Press, 2001.(in Chinese) [4] 金志明,曾思敏. 弹丸挤进工程的计算与研究[J]. 兵工学报, 1991,12 (1):7-13. JIN Zhi-ming, ZENG Si-min. A study on the calculation of the engraving process on projectiles[J]. Acta Armamentarii, 1991, 12(1):7-13.(in Chinese) [5] 吴志林,孔德仁. 计及挤进过程的双头弹膛内运动模型[J]. 火炮发射与控制学报, 2000, (1):9-14. WU Zhi-lin,KONG De-ren. On in bore motion model of twin nose projectile during squeezing process[J]. Journal of Gun Launch & Control. 2000, (1):9-14(in Chinese) [6] 张浩,周彦煌. 埋头弹火炮挤进过程研究[J]. 弹道学报, 2006, 18(1):76-79. ZHANG Hao, ZHOU Yan-huang. Research on the Engraving process of CTA[J]. Journal of Ballistics, 2006, 18(1):76-79.(in Chinese) [7] SUN He-yang, MA Ji-sheng, YAO Jia-jun, et al. Dynamic analysis on the rotating band’s engraving process[C]∥ZHANG Liang-chi. Manufacturing Engineering and Automation I. Switzerland: Trans Tech Publications, 2010: 1285-1288. [8] 孙河洋, 马吉胜, 李伟, 等. 坡膛结构变化对弹带挤进过程影响的研究[J]. 振动与冲击, 2010, 30(3):30-33. SUN He-yang, MA Ji-sheng, LI Wei, et al. Influence of different bore structures on engraving process on projectile[J]. Journal of Vibration and Shock, 2010, 30(3):30-33.(in Chinese) [9] Johnson G R, Cook W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]∥Proceedings of the Seventh International Symposium on Ballistics. Netherlands: 1983: 541-547. [10] Zerilli F J, Armstrong R W. Dislocation-mechanics-based constitutive relations for material dynamic calculations[J]. Int J Appl Phys, 1987,65:1816-1825. [11] Lemaitre J. A course on damage mechanics[M]. New York: Spingler-Verlag, 1992. [12] Zukas, J A. High velocity impact dynamics[M]. New York: Wiley, 1990. [13] Brvik T, Hopperstad O S, Berstad T, et al. A computational model of viscoplasticity and ductile damage for impact and penetration[J]. European Journal of Mechanics-A/Solids, 2001, 20:685-712. [14] Bao Y, Wierzbicki T. On fracture locus in the equivalent strain and stress triaxiality space[J]. International Journal of Mechanical Sciences, 2004, 46:81-98. [15] Teng X, Wierzbicki T. Evaluation of six fracture models in high velocity perforation[J]. Engineering Fracture Mechanics, 2006, 73:1653-78. [16] Xiao Xin-ke, Zhang Wei, Gang Wei. Effect of projectile hardness on deformation and fracture behavior in the Taylor impact test[J]. Materials & Design, 2010, 31(10): 4913-4920. [17] Johnson G R, Cook W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering Fracture Mechanics, 1985, 21:31-48. [18] 张雄,王天舒. 计算动力学[M]. 北京:清华大学出版社, 2007. ZHANG Xiong, WANG Tian-shu. Computational dynamics[M]. Beijing: Tsinghua University Press, 2007.(in Chinese) |