基于气体发生剂的子弹药气囊抛撒数值模拟研究

doi:10.3969/j.issn.1000-1093.2018.05.005

兵工学报 ›› 2018, Vol. 39 ›› Issue (5): 867-874.doi: 10.3969/j.issn.1000-1093.2018.05.005

基于气体发生剂的子弹药气囊抛撒数值模拟研究

王琪，蒋建伟，王树有

（北京理工大学爆炸科学与技术国家重点实验室，北京 100081）

收稿日期:2017-08-23 修回日期:2017-08-23 上线日期:2018-06-22
作者简介:王琪（1993—），男，硕士研究生。E-mail:wangqibit@126.com
基金资助:
国家国防科技工业局技术基础科研项目（B2620110006）

Research on Numerical Simulation of Submunition Dispenser with Gas Generant and Airbag

WANG Qi， JIANG Jian-wei， WANG Shu-you

(State Key Laboratory of Explosion Science and Technology， Beijing Institute of Technology， Beijing 100081， China)

Received:2017-08-23 Revised:2017-08-23 Online:2018-06-22

摘要/Abstract

摘要： 针对以气体发生剂为动力源的子弹药气囊抛撒数值模拟问题，采用LS-DYNA有限元软件，建立了以燃气质量流率-时间历程曲线为输入条件的子弹药气囊抛撒任意拉格朗日-欧拉流体与固体耦合计算模型，提出了采用内弹道理论和密闭爆发器试验求解气体发生剂名义燃速方程和燃气质量流率-时间历程曲线的方法。通过对装填不同药量氮气发生剂的典型子弹药气囊抛撒结构数值模拟，得到该抛撒结构下子弹药出舱速度、过载峰值随气体发生剂药量的变化规律，验证了弹箍对子弹药抛撒的促进作用。试验验证结果表明，所建立的数值模拟计算方法能较好地预测子弹药抛撒运动参数。

关键词: 子母弹, 气囊抛撒, 气体发生剂, 任意拉格朗日-欧拉法, 数值模拟

Abstract: For the numerical simulation of submunition dispenser with gas generant and airbag, a model of airbag dispersing is built by using software LS-DYNA and solid-liquid coupling ALE algorithm, in which the mass flow rate of gas is considered as the input parameter of numerical simulation. On the basis of interior ballistic theory and closed bomb vessel experiment, the nominal combustion rate equation of gas generant and the mass flow rate equation are presented. The typical structure of submunition dispenser fileed with different amount of gas generant is simulated to obtain the velocity of submunition dispensed from airbag and the change of overload peak with the amount of gas generant. The simulated results are in agreement with the test results. The results show that the proposed method could be used to predict the velocity and acceleration of submunitions in practical tests. Key

Key words: dispenserbomb, airbagdispersion, gasgenerant, arbitraryLagrangian-Eulerianmethod, numericalsimulation

中图分类号:

TJ413.⁺3

王琪，蒋建伟，王树有. 基于气体发生剂的子弹药气囊抛撒数值模拟研究[J]. 兵工学报, 2018, 39(5): 867-874.

WANG Qi， JIANG Jian-wei， WANG Shu-you. Research on Numerical Simulation of Submunition Dispenser with Gas Generant and Airbag[J]. Acta Armamentarii, 2018, 39(5): 867-874.

参考文献

［1］房玉军.子母弹气囊抛撒技术的理论与实验研究[D].北京:北京理工大学，2005.
FANG Yu-jun.Theory and experimental research on submunition dispenser with airbag[D].Beijing:Beijing Institute of Technology,2005. (in Chinese)
[2］蒋建伟,房玉军,门建兵,等.采用氮气发生剂的子弹药气囊抛撒内弹道计算模型[J].北京理工大学学报，2006,27(5):883-886.
JIANG Jian-wei,FANG Yu-jun,MEN Jian-bing,et al.Interior ballistic model of submunition dispenser with nitrogen gas generant and airbag[J]. Transactions of Beijing Institute of Technology, 2006,27(5):883-886.(in Chinese)
[3］王帅.子母战斗部囊式抛撒系统实验研究及数值仿真[D].南京:南京理工大学,2013.
WANG Shuai.Experimental and simulation study on the explosive cluster warhead dispersion system[D]. Nanjing:Nanjing University of Science and Technology,2013.(in Chinese)
[4］余莉，程涵，刘雄.气囊充气过程流固耦合数值模拟[J].南京航空航天大学学报，2010,42(4):472-476.
YU Li,CHENG Han,LIU Xiong.Numerical simulation of airbag during deploying process[J].Journal of Nanjing University of Aeronautics and Astronautics,2010,42(4):472-476. (in Chinese)
[5］李嗄.气囊式子母弹抛撒过程数值模拟[D].南京:南京理工大学,2012.
LI A.Numerical simulation on dispersal process of gasbag-style cluster bombs[D]. Nanjing:Nanjing University of Science and Technology,2012. (in Chinese)
[6］王浩.子母弹内燃式气囊抛撒模型及计算机仿真[J].兵工学报,2001,22(2):178-181.
WANG Hao.A model for the firing process of the internal-combustion gasbag submunition and its simulation[J]. Acta Armamentarii, 2001,22(2):178-181. (in Chinese)
[7］孟会林,孙新利,姬国勋,等.子母弹抛撒过程数值模拟及其试验[J].弹箭与制导学报,2004,24(8):317-321.
MENG Hui-lin,SUN Xin-li,JI Guo-xun,et al. Test and numerical simulation of the bullets spreading process of a primary-secondary bomb[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2004, 24(8):317-321. (in Chinese)
[8］张翔.子弹药低过载气囊驱动技术研究[D].北京:北京理工大学,2016.
ZHANG Xiang.Research on technology of low overload airbag driving submunition[D]. Beijing: Beijing Institute of Technology,2016.(in Chinese)
[9］代小芳.基于流固耦合方法的气囊展开数值模拟研究[D].大连:大连理工大学,2008.
DAI Xiao-fang.Numerical simulation of airbag deployment based on fluid-structure interaction methodology[D].Dalian:Dalian University of Technology,2008. (in Chinese)
[10］王帅,王浩,李嗄.含芳纶织物增强内衬复合材料气囊的静态变形过程实验研究与数值模拟[J].功能材料,2013,44(14):2097-2010.
WANG Shuai, WANG Hao, LI A. Experimental research and numerical simulation on static deformation of gasbag with textile reinforced composite lining[J]. Journal of Functional Materials, 2013,44(14):2097-2010. (in Chinese)
[11］ Hyun J K,Chang S K,Jun S H. A study of gas generator with double nozzle system[C]∥28th International Annual Conference of ICT. Karlsruhe,Germany: ICT, 1997:125-1-125-12.
[12］鲍廷钰,邱文坚.内弹道学[M].北京:北京理工大学出版社,1992.
BAO Ting-yu, QIU Wen-jian. Theory of interior ballistics[M]. Beijing:Beijing Institute of Technology Press, 1992. (in Chinese)
[13］朱跃龙.底火能量释放特性及其对内弹道性能研究的影响[D].南京:南京理工大学,2014.
ZHU Yue-long. The primer energy release characteristics and its influence on the interior ballistic performance[D]. Nanjing: Nanjing University of Science and Technology,2014.(in Chinese)

第39卷
第5期2018 年5月兵工学报ACTA
ARMAMENTARIIVol.39No.5May2018

[1]	严泽臣，岳松林，邱艳宇，王建平，赵跃堂，施杰，李旭. 水下爆炸冲击波反射压力计算方法的改进[J]. 兵工学报, 2024, 45(4): 1196-1207.
[2]	李婧, 孙晓霞, 马兴龙, 朱文祥. 开孔泡沫金属传热和流动特性[J]. 兵工学报, 2024, 45(1): 122-130.
[3]	康耕新, 颜海春, 张亚栋, 刘明君, 郝礼楷. 接触爆炸下混凝土墩破坏效应试验与数值模拟[J]. 兵工学报, 2024, 45(1): 144-155.
[4]	雷娟棉, 高毅, 勇政. 旋转导弹横向喷流干扰特性数值模拟[J]. 兵工学报, 2024, 45(1): 105-121.
[5]	王新宇, 姜春兰, 王在成, 方远德. 烤燃条件下JEO聚能装药战斗部泄压结构研究[J]. 兵工学报, 2024, 45(1): 1-14.
[6]	雷特, 武郁文, 徐高, 邱彦铭, 康朝辉, 翁春生. 基于大涡模拟方法的三维旋转爆轰流场结构研究[J]. 兵工学报, 2024, 45(1): 85-96.
[7]	周广盼, 王荣, 王明洋, 丁建国, 张国凯. 涂覆聚脲混凝土自锚式悬索桥主梁抗爆性能试验与数值模拟[J]. 兵工学报, 2023, 44(S1): 9-25.
[8]	寇永锋, 杨坤, 张斌, 肖迤文, 鲁建英, 陈朗. 基于烤燃实验和数值模拟的战斗部装药热安全性[J]. 兵工学报, 2023, 44(S1): 41-49.
[9]	余双洋, 彭永. 4340钢弹侵彻45号钢靶的温升数值模拟[J]. 兵工学报, 2023, 44(S1): 144-151.
[10]	余雯君, 陈胜云, 邓树新, 于冰冰, 晋冬艳. 爆炸冲击波在变向通道中传播规律数值模拟[J]. 兵工学报, 2023, 44(S1): 180-188.
[11]	杜永刚, 王雪松, 万志华. 助飞运载器螺旋传动失效的机理研究[J]. 兵工学报, 2023, 44(7): 2033-2040.
[12]	高铁锁, 江涛, 傅杨奥骁, 丁明松, 刘庆宗, 董维中, 许勇, 李鹏. 不同尺度飞行器周围等离子体分布及电磁波传输效应[J]. 兵工学报, 2023, 44(6): 1809-1819.
[13]	唐奎, 王金相, 刘亮涛, 杨明. 长杆弹二次侵彻机理及影响因素研究[J]. 兵工学报, 2023, 44(12): 3707-3718.
[14]	成乐乐, 黄风雷, 武海军, 田思晨, 陈文戈. 水下爆炸作用下多舱室结构的动力响应及损伤特性[J]. 兵工学报, 2023, 44(12): 3562-3579.
[15]	潘腾, 卞晓兵, 袁名正, 王亮亮, 黄元, 黄广炎, 张宏. 爆炸冲击波作用下聚氨酯-半球夹芯结构的动态响应[J]. 兵工学报, 2023, 44(12): 3580-3589.

基于气体发生剂的子弹药气囊抛撒数值模拟研究

Research on Numerical Simulation of Submunition Dispenser with Gas Generant and Airbag

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价