液体发射药迫击炮内弹道燃烧稳定性

doi:10.3969/j.issn.1000-1093.2020.11.001

摘要/Abstract

摘要： 为研究液体发射药迫击炮内弹道特性，搭建60 mm液体发射药迫击炮瞬态测试系统，对其燃烧室压力变化与迫击炮弹初速进行测试。在试验基础上，基于非定常欧拉-拉格朗日模型和液体发射药蒸发-燃烧模型建立带燃烧反应的液体发射药迫击炮两相流计算模型，对内弹道过程中的反应流场进行模拟，分析复杂气相流场与液体发射药喷射燃烧间的耦合关系及压力振荡形成机理。结果表明：60 mm液体发射药迫击炮燃烧稳定性好，具有工程化潜力；数值模拟与试验结果吻合度较高，且可以复现压力振荡现象，计算模型具有合理性；液体发射药的喷射与燃烧均受燃烧室内气涡的影响；反射波引发的液体发射药集中燃烧使压力表现为一种振荡发展。

关键词: 液体发射药迫击炮, 再生式液体发射药火炮, 压力振荡, 燃烧, 反应流场

Abstract: In order to explore the interior ballistic characteristics of liquid propellant mortar, a 60 mm liquid propellant mortar transient measurement system was developed to measure the pressure in combustion chamber and the muzzle velocity of mortar shell. Based on the experiment, a two-phase flow model with combustion reaction for liquid propellant mortar is established by using unsteady Eulerian-Lagrangian model and liquid propellant evaporation-combustion model. The coupling relationship between the complex gas phase flow field and the injection-combustion of liquid propellant as well as the formation mechanism of pressure oscillations are analyzed by simulating the reaction flow field during the interior ballistic process. The results show that the 60 mm liquid propellant mortar has excellent combustion stability. The numerically simulated results are in good agreement with the experimental results, where the experimental pressure oscillation is repeated, proving that the established model is reasonable and reliable. Both injection and combustion of liquid propellant are affected by gas vortex in combustion chamber. The concentrated combustion caused by the reflected waves makes the pressure appear as an oscillatory development.

Key words: liquidpropellantmortar, regenerativeliquidpropellantgun, pressureoscillation, combustion, reactionflowfield

中图分类号:

TJ012.1⁺5

孙明亮，陆林，刘宁，张相炎. 液体发射药迫击炮内弹道燃烧稳定性[J]. 兵工学报, 2020, 41(11): 2145-2154.

SUN Mingliang, LU Lin, LIU Ning, ZHANG Xiangyan. Combustion Stability of Interior Ballistics of Liquid Propellant Mortar[J]. Acta Armamentarii, 2020, 41(11): 2145-2154.

参考文献

［1］于子平, 张相炎. 新概念火炮[M]. 北京: 国防工业出版社, 2012: 64-65.
YU Z P, ZHANG X Y.New concept gun [M]. Beijing: National Defense Industry Press, 2012: 64-65. (in Chinese)
[2］张相炎, 刘宁. 再生式液体发射药火炮发射过程仿真[M]. 北京: 国防工业出版社, 2014: 24-25.
ZHANG X Y, LIU N. Launching process simulation of regenerative liquid propellant gun [M]. Beijing: National Defense Industry Press, 2014: 24-25. (in Chinese)
[3］金志明，杨新民，宋明. 再生式液体火炮经典内弹道模型[J]. 兵工学报, 1992, 14(3): 1-7.
JIN Z M, YANG X M, SONG M. A classical interior ballistics model for regenerative liquid propellant guns [J]. Acta Armamentarii, 1992, 14(3): 1-7. (in Chinese)
[4］ COFFEE T P. Progress in modeling pressure oscillations in regenerative liquid propellant guns [J]. Journal of Propulsion and Power, 2000, 16(2): 302-308.
[5］刘宁，张相炎. 再生式液体发射药火炮喷雾燃烧理论及数值仿真[J]. 工程力学, 2009, 26(3): 224-228.
LIU N, ZHANG X Y. Theory and numerical simulation of spray combustion process in regenerative liquid propellant guns [J]. Engineering Mechanics, 2009, 26(3): 224-228. (in Chinese)
[6］王亮宽, 张相炎, 刘宁. 再生式液体发射药火炮贮液室激波模型[J]. 兵工学报, 2007, 28(8): 915-918.
WANG L K, ZHANG X Y, LIU N. Shock wave model in reservoir of regenerative liquid propellant gun [J]. Acta Armamentarii, 2007, 28(8): 915-918. (in Chinese)
[7］庄逢辰, 陈新华. OTTO-II燃料液滴的着火简化模型法和数值计算法[J]. 工程热物理学报, 1981,2(2): 191-193.
ZHUANG F C, CHEN X H. The simplified model approach and the numerical computation method for ignition of the OTTO-II fuel droplet[J]. Journal of Engineering Thermophysics, 1981, 2(2): 191-193. (in Chinese)
[8］ SWAMI U, AMBEKAR A, GONDGE D, et al. Burn rate characterization of desensitized isopropyl nitrate blends [J]. Combustion and Flame, 2018, 190: 454-466.
[9］ XUE X C, YU Y G, MANG S S. Study on combustion characteristics and propelling projectile motion process of bulk-loaded liquid propellant [J]. Journal of Energetic Materials, 2017, 35(3): 346-362.
[10］ CHENG C, ZHANG X B. Influence of serial and parallel structures on the two-phase flow behaviors for dual combustion chambers with a propelled body [J]. Powder Technology, 2017, 314: 442-454.
[11］ KASSOY D R. Thermomechanical concepts and modeling for stability physics in liquid-propellant rocket engines [J]. AIAA Journal, 2017, 55(6): 2043-2051.
[12］ TAGHAVI S R, DEHNAVI M A, GHAFOURI A. Numerical analysis of reactive turbulent flow in the thrust chamber of RD-108 engine rocket [J]. Defence Technology, 2019, 15(4): 565-575.
[13］马龙泽, 余永刚. 底部排气装置快速降压过程中燃烧流动特性数值分析[J]. 兵工学报, 2019, 40(3): 488-499.
MA L Z, YU Y G. Numerical investigation of combustion and flow characteristics of combustion gas in rapid depressurization process of base bleed unit [J]. Acta Armamentarii, 2019, 40(3): 488-499. (in Chinese)
[14］张小兵. 枪炮内弹道学[M]. 北京: 北京理工大学出版社, 2014: 76-77.
ZHANG X B. Interior ballistics of guns [M]. Beijing: Beijing Institute of Technology Press, 2014: 76-77. (in Chinese)
[15］陆林, 刘宁, 张相炎. 液体发射药迫击炮内弹道建模及性能分析[J]. 弹道学报, 2017, 29(3): 68-73.
LU L, LIU N, ZHANG X Y. Modeling and performance analysis for ballistics of mortar with liquid propellant [J]. Journal of Ballistics, 2017, 29(3): 68-73. (in Chinese)
[16］肖忠良. 膛内火药燃烧气体化学热力学计算[J]. 太原机械学院学报, 1988, 9(4): 9-16.
XIAO Z L. Chemical thermodynamic calculation of combustion gas of gunpowder in the chamber [J]. Journal of Taiyuan Institute of Machinery, 1988, 9(4): 9-16. (in Chinese)
[17］金志明, 袁亚雄, 宋明. 现代内弹道学[M]. 北京: 北京理工大学出版社, 1992: 236-241.
JIN Z M, YUAN Y X, SONG M. Modern interior ballistics [M]. Beijing: Beijing Institute of Technology Press, 1992: 236-241. (in Chinese)
[18］袁亚雄, 张小兵. 高温高压多相流体动力学理论与应用[M]. 北京: 北京理工大学出版社,2016: 69-70.
YUAN Y X, ZHANG X B. Theories and applications of multiphase flow dynamics in high temperature and high pressure [M]. Beijing: Beijing Institute of Technology Press, 2016: 69-70. (in Chinese)
[19］庄逢辰, 钟良生. 液体单元推进剂燃烧效率计算理论[J]. 工学学报, 1978, 1(2): 1-20.
ZHUANG F C, ZHONG L S.Theory of combustion efficiency calculation of liquid monopropellant [J]. Journal of Engineering, 1978, 1(2): 1-20. (in Chinese)
[20］ SAZHIN S S. Advanced models of fuel droplet heating and evaporation [J]. Progress in Energy and Combustion Science, 2006, 32(2): 162-214.
[21］ TURNS S R. An introduction to combustion: concepts and applications [M]. Singapore: McGraw-Hill Book Co., 2000: 9-31.
[22］张玉荣, 金志明, 余永刚. 高压下液体射流破碎雾化特性实验研究[J].航空动力学报, 1999, 14(4): 409-412.
ZHANG Y R, JIN Z M, YU Y G. Experimental study on atomization characteristics of liquid jet under high pressure [J]. Journal of Aerospace Power, 1999, 14(4): 409-412. (in Chinese)

[1]	师军飞，钱林方，陈光宋，尹强，刘道坤，李仲刚. 基于数字图像相关原理的埋头弹程序燃烧特性试验研究[J]. 兵工学报, 2024, 45(4): 1047-1059.
[2]	雷特, 武郁文, 徐高, 邱彦铭, 康朝辉, 翁春生. 基于大涡模拟方法的三维旋转爆轰流场结构研究[J]. 兵工学报, 2024, 45(1): 85-96.
[3]	崔立宝, 杨钊, 丁亚军, 周杰, 肖忠良. 聚多巴胺包覆四孔发射药的结构与性能[J]. 兵工学报, 2023, 44(7): 2014-2022.
[4]	王德友, 李世鹏, 金戈, 王茹瑶, 官典, 王宁飞. 耦合尾喷管堵盖运动的水下固体火箭发动机点火启动过程特性[J]. 兵工学报, 2023, 44(6): 1665-1676.
[5]	杨素兰, 张皓瑞, 聂洪奇, 严启龙. Al/Ti基纳米复合燃料热反应性及燃烧性能[J]. 兵工学报, 2023, 44(4): 1118-1125.
[6]	吴晗, 张泽宇, 孙柏刚, 李向荣. 连续燃烧分缸工作型发动机理论热力循环分析[J]. 兵工学报, 2023, 44(1): 74-83.
[7]	余毅磊, 王晓东, 任文科, 马铭辉, 蒋招绣, 高光发. 陶瓷/金属复合靶受12.7mm穿甲燃烧弹侵彻时弹靶破碎特征[J]. 兵工学报, 2022, 43(9): 2307-2317.
[8]	张宁，史金光，王中原，马晔璇. 带有钝体的弹用固体燃料冲压发动机工作性能[J]. 兵工学报, 2022, 43(7): 1519-1526.
[9]	李永鹏，徐豫新，张健，花培鑫，赵晓旭. SiC陶瓷/UHMWPE纤维复合结构抗12.7mm穿甲燃烧弹试验与仿真[J]. 兵工学报, 2022, 43(6): 1355-1364.
[10]	孟豪龙，翁春生，武郁文，郑权，肖强，王放，白桥栋. 环形燃烧室中凹腔对C₂H₄/Air旋转爆轰流场影响的数值模拟[J]. 兵工学报, 2022, 43(5): 1063-1074.
[11]	凌江，徐义华，孙海俊，刘炜根，冯喜平. 凹腔对含硼固体火箭超燃冲压燃烧特性的影响[J]. 兵工学报, 2022, 43(5): 1054-1062.
[12]	温怡豪，王金金，查柏林，徐志高. 两次进气对固体火箭冲压组合发动机燃烧和烧蚀环境的影响[J]. 兵工学报, 2022, 43(4): 804-813.
[13]	汪靖程，李晓刚，叶耀坤，丁峰，熊诗辉，温玉全. 分离螺母多种火药燃烧模型及影响因素[J]. 兵工学报, 2022, 43(12): 3070-3081.
[14]	周柏航，陶如意，王浩，阮文俊. 带侵蚀燃烧效应的阶梯多根装药火箭发动机三维内流场特性[J]. 兵工学报, 2021, 42(8): 1604-1612.
[15]	马宝印，李军伟，张海龙，赵桂琦，张智慧，席运志，王宁飞. 阻尼环对固体火箭发动机热声振荡的影响[J]. 兵工学报, 2021, 42(5): 930-943.