分离螺母多种火药燃烧模型及影响因素

doi:10.12382/bgxb.2021.0723

摘要/Abstract

摘要： 为准确预示反推式分离螺母各运动组件的分离行为，建立考虑多种火药燃烧、热散失、密封圈摩擦力、内部机构多阶段运动的数学模型。模型模拟得到的腔内压力等分离特性参量与实测值相吻合。与忽略热散失与密封圈摩擦力的模型预测结果相比，该模型对腔内压力等参量的预测结果更接近实测值，可避免腔内峰值压力33%、内套筒峰值速度47%的过预示。使用建立的模型分析装药量对分离特性的影响规律。分析结果表明：采用新模型可适当增加药盒装药量，大幅减少快燃速Al/KClO₄药量，有利于提高分离可靠性、降低分离冲击。

关键词: 分离螺母, 火药, 燃烧模型, 铝/高氯酸钾, 内弹道

Abstract: To accurately predict the separation behaviors of the motive components of an indirect-thrust split nut and the pressure change in the combustion chamber, a mathematical model is established while considering multi-pyrotechnic charges, multi-stage motion equations of the motive components, O-ring friction, and heat loss. Compared with the experimental results, the time history of pressure is predicted with high agreement by the model. If the heat loss and O-ring friction are not considered, the predicted peak pressure and peak velocity of the inner sleeve are overpredicted by 33% and 47%, respectively. The effects of the pyrotechnic charge mass on separation behaviors are investigated using the established model. Increasing the mass of the propellant case and reducing the mass of aluminum potassium perchlorate could effectively improve the reliability of separation and reduce shock.

Key words: separationnut, pyrotechnic, combustionmodels, aluminumpotassiumperchlorate, interiorballistics

中图分类号:

TJ55
O389

汪靖程，李晓刚，叶耀坤，丁峰，熊诗辉，温玉全. 分离螺母多种火药燃烧模型及影响因素[J]. 兵工学报, 2022, 43(12): 3070-3081.

WANG Jingcheng, LI Xiaogang, YE Yaokun, DING Feng, XIONG Shihui, WEN Yuquan. Model Formulation and Influencing Factors for a Separation Nut Considering the Combustion of Multiple Pyrotechnic Charges[J]. Acta Armamentarii, 2022, 43(12): 3070-3081.

参考文献

［1］ BEMENT L, SCHIMMEL M.A manual for pyrotechnic design, development and qualification［R］.Hampton, Virginia, US:National Aeronautics and Space Administration, Langley Research Center, 1995: 6-14.
［2］郝芳, 刘世毅.航天火工技术的发展与展望［J］.航天返回与遥感, 2018, 39(4):95-100.
HAO F, LIU S Y.Development and prospect of pyrotechnics technology in spacecraft［J］. Spacecraft recovery and remote sensing, 2018, 39(4): 95-100.（in Chinese）
［3］何春全, 严楠, 叶耀坤.导弹级间火工分离装置综述［J］.航天返回与遥感, 2009, 30(3):70-77.
HE C Q, YAN N, YE Y K. Study of stage separation device for missile［J］.Spacecraft Recovery and Remote Sensing, 2009, 30(3): 70-77.（in Chinese）
［4］张雪原.低冲击分离装置工作过程的数学建模与性能研究［D］.哈尔滨:哈尔滨工业大学, 2010.
ZHANG X Y.Modeling on operation process of low-shock separation devices and its performance research［D］.Harbin:Harbin Institute of Technology, 2010.（in Chinese）
［5］ WOO J, CHA S W, CHO J Y, et al. Prediction of pyroshock-reduced split nut behaviors［J］.Journal of Propulsion and Power, 2018, 34(5):1240-1255.
［6］ WOO J, CHA S W, KIM G, et al. Concept of unburning ratio and combustion modeling of ZPP and BKNO3 in pyroshock-reduced split nut［J］.Propellants, Explosives, Pyrotechnics, 2020, 45(5): 775-787.
［7］张欢, 刘天雄, 李长江, 等.航天器火工分离螺母的火工冲击环境数值仿真研究［J］.航天器环境工程, 2014, 31(4):363-368.
ZHANG H, LIU T X, LI C J, et al.Numerical simulation of pyrotechnic shock environment concerning pyroshock split nut of spacecraft［J］.Spacecraft Environment Engineering, 2014, 31(4): 363-368.（in Chinese）
［8］赵欣, 郑世贵, 韩增尧, 等.点式分离火工冲击源仿真分析及载荷形成机理［J］.宇航学报, 2016, 37(6): 657-663.
ZHAO X, ZHENG S Q, HAN Z Y, et al.Numerical simulation and analysis for point separating pyroshock source and load forming mechanism［J］.Journal of Astronautics, 2016, 37(6): 567-663.（in Chinese）
［9］ WANG X X, QIN Z Y, DING J F, et al.Finite element modeling and pyroshock response analysis of split nuts［J］. Aerospace Science and Technology, 2017, 68(9):380-390.
［10］ ZHAO H D, LIU W, DING J F, et al.Numerical study on separation shock characteristics of pyrotechnic split nuts［J］. Acta Astronautica, 2018, 151(10): 893-903.
［11］杨宁, 范伯钧, 洪青峰.分离螺母冲击环境数值仿真研究［J］.载人航天, 2017, 23(6):776-783.
YANG N, FAN B J, HONG Q F. Numerical analysis of shock response in typical low impact split nut［J］.Manned Spaceflight, 2017, 23(6):776-783.（in Chinese）
［12］赵象润, 严楠, 郭崇星, 等.节流孔对分离螺母火工冲击的影响［J］.含能材料, 2021, 29(6): 535-542.
ZHAO X Y, YAN N, GUO C X, et al.Effects of orifice on pyroshock of split nut［J］.Chinese Journal of Energetic materials, 2021, 29(6): 535-542.（in Chinese）
［13］张小兵.枪炮内弹道学［M］.北京:北京理工大学出版社, 2014:19-50.
ZHANG X B.Interior ballistics of guns［M］.Beijing: Beijing Institute of technology press, 2014:19-50.（in Chinese）
［14］高滨.火工分离装置的性能研究［D］.长沙:国防科学技术大学, 2005.
GAO B.Research on the pyrotechnically actuated separation devices［D］.Changsha:National University of Defense Technology, 2005.（in Chinese）
［15］梁晓爱, 聂建新, 王帅, 等.密闭爆发器中Al/KClO₄点火器的输出性能研究［J］.兵工学报, 2017, 38(8):1513-1519.
LIANG X A, NIE J X, WANG S, et al.Research on output performance of Al/KClO₄ igniter in closed bomb［J］.Acta Armamentarii, 2017, 38(8):1513-1519.（in Chinese）
［16］ LEE H. Estimating heat losses in pyrotechnic devices［C］∥Proceedings of the 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit.Tucson, Arizona: AIAA, 2005.
［17］汪靖程, 李燕华, 温玉全, 等.典型点火器不同装药量下输出冲击试验与分析［J］.振动与冲击, 2020, 39(2):16-21.
WANG J C, LI Y H, WEN Y Q, et al. Test and analysis of the output shock under different loading doses of a typical igniter［J］. Journal of Vibration and Shock, 2020, 39(2):16-21.（in Chinese）
［18］ GLEB V.Thermodynamic analysis of combustion products at high pressure and temperature［J］.Propellant, Explosive, Pyrotechnics, 1998, 23(2): 86-89.
［19］纪军.气缸O型圈密封及摩擦特性的研究［D］.哈尔滨:哈尔滨工业大学, 2015.
JI J.Research on sealing and friction characteristic of O-seal ring［D］.Harbin: Harbin Institute of Technology, 2015.（in Chinese）
［20］ XIONG S H, LI Y H, YE Y K, et al. Quantitatively decoupling the impact of preload and internal mechanism motion on pyrotechnic separation shock［J］.International Journal of Aeronautical and Space Sciences, 2021, 22:1106-1117.
［21］ LUNA A.Operational improvement of a pyrotechnic ultra low shock split nut［C］∥Proceedings of the 36th Aerospace Mechnaisms Symposium.Washington, DC, US：NASA, 2002.
［22］李燕华.典型点式火工分离装置冲击预示与控制研究［D］.北京:北京理工大学, 2019.
LI Y H.Shock prediction and control of typical point pyrotechnical separation devices［D］.Beijing:Beijing Institute of Technology, 2019.（in Chinese）

[1]	杨拓, 熊诗辉, 汪靖程, 赵象润, 温玉全. 火工分离螺母作动噪声的预示和解耦[J]. 兵工学报, 2024, 45(3): 763-773.
[2]	丁彦超, 王宝寿, 吴文婷, 刘新辉, 童心. 水压驱动两级提拉式水下发射装置内弹道建模[J]. 兵工学报, 2024, 45(2): 594-605.
[3]	田忠亮, 李军伟, 贺业, 许团委, 丁淼, 王宁飞. 横向过载下锥孔三维药柱的内弹道特性[J]. 兵工学报, 2023, 44(7): 1896-1907.
[4]	王雪琴, 马吴宁, 马大为, 王尚龙, 张震东. 考虑泄漏的无杆式高压气动弹射器内弹道精确建模及试验[J]. 兵工学报, 2023, 44(7): 1867-1880.
[5]	师军飞, 钱林方, 陈红彬, 付佳维. 埋头弹高速冲击挤进入膛特性研究[J]. 兵工学报, 2023, 44(3): 656-669.
[6]	常人九, 薛晓春, 余永刚. 计及动态冲击挤进过程的埋头式弹药内弹道特性[J]. 兵工学报, 2022, 43(9): 2388-2398.
[7]	赵子熹, 姜毅, 贾启明, 牛钰森. 基于高压工质的弹射内弹道研究[J]. 兵工学报, 2022, 43(7): 1553-1564.
[8]	贾启明，姜毅，杨莹，赵子熹，王志浩. 新型推力可控垂直发射装置及其内弹道规律[J]. 兵工学报, 2022, 43(7): 1596-1605.
[9]	曾培高，姜毅，杨哩娜. 上浮式水面发射筒弹射内弹道特性[J]. 兵工学报, 2022, 43(6): 1266-1276.
[10]	高峰，张泽. 含装药缺陷的固体火箭发动机性能评估综述[J]. 兵工学报, 2021, 42(8): 1789-1802.
[11]	赵奇峰，李运良，李进，张向荣，朱玉荣，谭书舜，张子栋. 基于应变测试系统的二级轻气炮活塞运动测量[J]. 兵工学报, 2021, 42(8): 1803-1808.
[12]	宋健，宋向华，蔡蒨，佘湖清. 火箭弹自力弹射内弹道特性[J]. 兵工学报, 2021, 42(5): 944-954.
[13]	李博平，李国庆，张笈玮，吕宏亮，武军，李孟源，李聪睿. 压缩空气弹射系统内弹道特性[J]. 兵工学报, 2021, 42(12): 2606-2616.
[14]	金文奇，宁金贵，王剑，邓波. 基于全膛烧蚀磨损特征的火炮内弹道仿真研究[J]. 兵工学报, 2019, 40(5): 968-977.
[15]	沈超，周克栋，陆野，乔自平. 内膛损伤枪管对内弹道性能和弹头出膛状态的影响研究[J]. 兵工学报, 2019, 40(4): 718-727.