[1] 张喜发,卢兴华.火炮烧蚀内弹道学[M].北京:国防工业出版社2001: 43-84. ZHANG X F,LU X H. Interior ballistics of erosion guns[M].Beijing: National Defense Industry Press,2001:43-84.(in Chinese)
[2] 米粮川,高树滋,赖长缨.内弹道弹带挤进过程仿真研究[J].弹箭与制导学报,2012,32(1):133-135. MI L C,GAO S Z,LAI C Y. The simulation study on band edging properties in interior ballistics [J].Journal of Projectiles, Rockets, Missiles and Guidance,2012,32(1):133-135.(in Chinese) [3] 孙河洋,马吉胜,李伟,等.坡膛结构变化对火炮内弹道性能影响的研究[J].兵工学报,2012,33(6):669-674. SUN H Y,MA J S,LI W,et al. Study on influence of bore structure on gun's interior ballistics performances [J].Acta Aramamentarii,2012,33(6):669-674.(in Chinese)
[4] 刘双杰,郝永平.35 mm高射炮钝感发射药的内弹道仿真[J].弹箭与控制学报,2010,30(1):170-172. LIU S J,HAO Y P. Numerical simulation of interior ballistic for 35 mm antiaircraft artillery with deterred-propellant[J].Journal of Projectiles,Rockets,Missiles and Guidance ,2010,30(1):170-172.(in Chinese) [5] 刘林,樊成军,胡敬坤,等.混合装药内弹道仿真及多参数符合计算[J].火炮发射与控制学报,2014,35(1):48-51. LIU L,FAN C J,HU J K,et al. Simulation and research on multi-parameter according calculation of mixed-charge interior ballistics [J].Journal of Gun Lunch & Control,2014,35(1):48-51.(in Chinese) [6] 王加刚,余永刚,郭飞,等.多参数变化对埋头弹火炮内弹道性能的影响[J].弹道学报,2015,27(2):69-73. WANG J G,YU Y G,GUO F,et al. Effects of multi-parameter change on interior ballistics properties of cased telescoped ammunition gun [J].Journal of Ballistics,2015, 27(2):69-73.(in Chinese) [7] LU X, ZHOU Y H, YU Y G. Experimental study and numerical simulation of propellant ignition and combustion for cased telescoped ammunition in chamber [J].Journal of Applied Mechanics,2010,77(5):051402. [8] LIU N, ZHANG X Y. Quasi-dimensional interior ballistic model and numerical simulation of combustion light gas gun[C]∥Proceedings of the 26th International Symposium on Ballistics.Miami,FL,US:International Ballistics Society, 2011:625-632. [9] 金志明.枪炮内弹道学[M].北京:北京理工大学出版社,2004:81-112. JIN Z M.Interior ballistics of gun and cannon[M].Beijing: Beijing Institute of Technology Press,2007:81-112.(in Chinese)
[10] 蒋淑园,王浩,林长津,等.考虑管状药束轴向运动的大口径平衡炮二维内弹道模型的建立与仿真[J].兵工学报,2016,37(10):1941-1948. JIANG S Y,WANG H,LIN C J,et al. Establishment and simulation of two-dimensional interior ballistics model of large caliber Davis gun considering the axial movement of tubular charge clusters[J]. Acta Aramamentarii, 2016,37(10):1941-1948.(in Chinese)
[11] 姚琳,马大为,马吴宁,等,两级提拉式单侧弹射装置内弹道建模与优化[J].兵工学报,2017,38(3):466-475. YAO L,MA D W,MA W N,et al. Interior ballistics modeling and optimization of one-side ejection device with two-step cylinder [J]. Acta Aramamentarii, 2017,38(3):466-475.(in Chinese) [12] 田桂军.内弹道烧蚀磨损及其对内弹道性能影响的研究[D].南京:南京理工大学,2003:30-43. TIAN G J. Researches on the wear and erosion of bore and its influence to interior ballistic perfoemance[D]. Nanjing: Nanjing University of Science and Technology, 2003:30-43. (in Chinese) [13] 钱林方.火炮弹道学[M]. 北京:北京理工大学出版社,2009:163-178. QIAN L F. The artillery ballistics[M]. Beijing: Beijing Institute of Technology Press, 2009:163-178. (in Chinese)
[14] 翁春生,王浩.计算内弹道学[M].北京:国防工业出版社,2006:2-23. WENG C S,WANG H. Computational interior ballistics[M]. Beijing: National Defense Industry Press,2006:2-23.(in Chinese)
[15] 金志明,袁亚雄,宋明.现代内弹道学[M].北京:北京理工大学出版社,1992:25-30. JIN Z M, YUAN Y X, SONG M. Modern interior ballistics[M].Beijing: Beijing Institute of Technology Press,1992:25-30.(in Chinese)
第40卷第5期 2019 年5月兵工学报ACTA ARMAMENTARIIVol.40No.5May2019
|