综合传动换挡品质的误差逆传播神经网络评价方法

doi:10.3969/j.issn.1000-1093.2014.04.010

兵工学报 ›› 2014, Vol. 35 ›› Issue (4): 495-500.doi: 10.3969/j.issn.1000-1093.2014.04.010

综合传动换挡品质的误差逆传播神经网络评价方法

王叶，陶刚，李德晴，马岳峰

（北京理工大学机械与车辆学院, 北京 100081）

收稿日期:2013-08-22 修回日期:2013-08-22 上线日期:2014-05-26
作者简介:王叶（1987—），女，硕士研究生
基金资助:
国家”863”计划项目（2012AA111713）

Shifting Evaluation of Integrated Transmission Based on Back Propagation Neural Network

WANG Ye, TAO Gang, LI De-qing, MA Yue-feng

(School of Mechanical Engineering, Beijing Institute of Technology,Beijing 100081, China)

Received:2013-08-22 Revised:2013-08-22 Online:2014-05-26

摘要/Abstract

摘要： 从换挡平顺性的角度出发，确定涡轮转速变化率的峰值、涡轮转速平均变化率及挡位3个参数作为客观评价指标，并将其细化定义；基于神经网络的基本原理，利用误差逆传播神经网络（BPNN）对履带车辆综合传动装置换挡品质评价进行客观描述；应用Matlab/Simulink软件的神经网络工具箱函数，建立用于评价车辆换挡品质的神经网络模型，并借助于GUI工具箱开发换挡品质客观评价等级软件进行仿真研究。通过神经网络测试结果与主观评价对比，证明此方法与传统主观评价方法具有较好的一致性，增强了换挡品质评价的客观性、针对性和灵活性。

关键词: 兵器科学与技术, 综合传动, 换挡品质评价, 误差逆传播神经网络

Abstract: To improve the shifting comfort, the peak of the turbine speed change rate, the average rate of the turbine speed change and gear are determined as three objective evaluation indices, which are defined in detail, and an objective description of shift quality evaluation for tracked vehicle equipped with integrated automatic transmission is given using back propagation neural network (BPNN) according to its basic principle. A BPNN model used for evaluating shift quality is established and trained by using the BPNN toolbox in Matlab/Simulink software, and an objective evaluation shift software is designed specially using GUI box in Matlab environment. The comparison of the test results with the subjective ratings shows that the developed evaluation method has a better consistency with the traditional one, which can also enhance the objectivity, pertinency and flexibility of this system.

Key words: ordnance science and technology, integrated transmission, shifting evaluation, back propagation neural network

中图分类号:

U463.212

王叶，陶刚，李德晴，马岳峰. 综合传动换挡品质的误差逆传播神经网络评价方法[J]. 兵工学报, 2014, 35(4): 495-500.

WANG Ye, TAO Gang, LI De-qing, MA Yue-feng. Shifting Evaluation of Integrated Transmission Based on Back Propagation Neural Network[J]. Acta Armamentarii, 2014, 35(4): 495-500.

参考文献

［1］刑如飞，管欣，田承伟,等. 汽车操纵稳定性主观评价指标权重确定方法[J]. 吉林大学学报:工学版，2009，39(3)：33-38.
XING Ru-fei, GUAN Xin, TIAN Cheng-wei, et al. Weight of subjective evaluation indexes for car handling and stability[J]. Journal of Jilin University: Engineering and Technology Edition, 2009, 39(3):33-38． (in Chinese)
[2] Huang Q, Wang H. Fundamental study of jerk: evaluation of shift quality and ride comfort, SAE Technical Paper, 2004-01-2065［R］. US: SAE, 2004.
[3] Zhang J, Lei Y, Hua X, et al. Proposed shift quality metrics and experimentation on AMT shift quality evaluation[C]∥Third International Conference on Natural Computation. Haikou:IEEE,2007.
[4] 王健，雷雨龙，郭孔辉,等．车辆换挡质量概念的完善与评价[J]．吉林大学学报:工学版，2007，37(5)：1014-1018.
WANG Jian, LEI Yu-long, GUO Kong-hui, et al. Concept improvement and assessment on vehicle gear shift quality[J].Journal of Jilin University: Engineering and Technology Edition, 2007, 37(5):1014-1018. (in Chinese)
[5] Schwab L F. Development of a shift quality metric for an automatic transmission[J]. SAE Transactions, 1994, 103(6): 1402-1407.
[6] 陈刚，张为公，龚宗洋,等．基于证据理论和模糊神经网络的汽车换挡平顺性评价方法[J]．汽车工程，2009，31(4)：308-312.
CHEN Gang, ZHANG Wei-gong, GONG Zong-yang,et al. Evaluation model for vehicle shift quality based on evidence theory and FNN[J].Automatic Engineering, 2009, 31(4):308-312. (in Chinese)
[7] 孙贤安，吴光强．双离合器式自动变速器车辆换挡品质评价系统[J]．机械工程学报，2011，47(8)：146-151.
SUN Xian-an,WU Guang-qiang. Shifting quality evaluation system for dual clutch transmission vehicle[J]. Journal of Mechanical Engineering, 2011, 47(8):146-151. (in Chinese)
[8] List H, Sehoeggl P. Objective evaluation of vehicle driveability, SAE Technical Paper, 980204［R］. US: SAE, 1998.
[9] Schoeggl P, Ramschak E. Vehicle driveability assessment using neural networks for development, calibration and quality tests[J]. SAE Transactions, 2000, 109(6): 1052-1061.
[10] Schnetzler S, Pettersson J, Murtonen P. Quality assurance of driver comfort for automatic transmissions, SAE Technical Paper, 2000-01-0175［R］. US: SAE, 2000.
[11] 张建国，雷雨龙，王健,等．基于BP神经网络的换挡品质评价方法[J]．吉林大学学报:工学版，2007，37(5)：1019-1022.
ZHANG Jian-guo, LEI Yu-long, WANG Jian, et al. Methods for shift quality evaluation based on BP neural network[J]. Journal of Jilin University: Engineering and Technology Edition, 2007, 37(5): 1019- 1022. (in Chinese)
[12] 刘洪波，雷玉龙，张建国,等．双离合器式自动变速器控制品质评价与优化[J]．吉林大学学报:工学版，2012,42(6)：1360-1365.
LIU Hong-bo, LEI Yu-long, ZHANG Jian-guo, et al. Shift quality assessment and optimization of double clutch transmission[J]. Journal of Jilin University: Engineering and Technology Edition, 2012, 42(6):1360-1365. (in Chinese)

[1]	徐保荣, 张金乐, 万丽, 吴昊阳, 王立勇. 基于多传感器数据关联的综合传动装置服役状态辨识方法[J]. 兵工学报, 2024, 45(2): 574-583.
[2]	徐保荣, 张金豹, 姚李刚, 邹天刚, 万丽. 液力机械综合传动装置低温阻力矩特性研究与验证[J]. 兵工学报, 2023, 44(6): 1829-1836.
[3]	高普, 李宏才, 刘辉, 孟杰克. 装甲车辆综合传动装置外接油管系统动态特性分析[J]. 兵工学报, 2023, 44(11): 3447-3454.
[4]	张金豹, 盖江涛, 安媛媛, 桂林, 朱炳先, 邹天刚. 基于智能优化相关向量机的综合传动变工况直驶传递效率预测[J]. 兵工学报, 2023, 44(1): 270-278.
[5]	陈娟，周广明，李欣桐，邹天刚，侯威，孙雪岩. 基于MBSE的综合传动装置需求分析[J]. 兵工学报, 2022, 43(S1): 11-20.
[6]	周伯俊, 于传强，刘志浩，柯冰. 基于高压储能的特种车辆快速起竖技术与验证[J]. 兵工学报, 2022, 43(7): 1488-1497.
[7]	高月光，冯顺山，刘云辉，黄岐. 不同端盖厚度的圆柱形装药壳体破片初速分布[J]. 兵工学报, 2022, 43(7): 1527-1536.
[8]	邹天刚，闫清东，盖江涛，侯威，王志涛，帅志斌，孙雪岩. 基于扁平电机的轻混式履带车辆综合传动方案[J]. 兵工学报, 2021, 42(10): 2233-2241.
[9]	王成，毛飞鸿，侯威，张金乐，邹天刚. 基于动态扭矩测试的综合传动系统主轴低周疲劳寿命预测与验证[J]. 兵工学报, 2020, 41(7): 1262-1269.
[10]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[11]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[12]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[13]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[14]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[15]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.

综合传动换挡品质的误差逆传播神经网络评价方法

Shifting Evaluation of Integrated Transmission Based on Back Propagation Neural Network

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价