基于内聚裂纹模型的高聚物粘结炸药模拟材料动态巴西实验的数值模拟

doi:10.3969/j.issn.1000-1093.2016.09.013

兵工学报 ›› 2016, Vol. 37 ›› Issue (9): 1639-1645.doi: 10.3969/j.issn.1000-1093.2016.09.013

基于内聚裂纹模型的高聚物粘结炸药模拟材料动态巴西实验的数值模拟

崔云霄^1，2，陈鹏万¹， David A. Cendón³，戴开达¹，钟方平²

（1.北京理工大学爆炸科学与技术国家重点实验室, 北京 100081；2.西北核技术研究所, 陕西西安 710024；3.马德里理工大学，西班牙马德里 28040）

收稿日期:2015-11-11 修回日期:2015-11-11 上线日期:2016-11-04
作者简介:崔云霄(1980—)，男，博士研究生
基金资助:
国家自然科学基金项目（11202027、11221202、U1330202）

Numerical Simulation of Dynamic Brazilian Test of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model

CUI Yun-xiao^{1, 2}, CHEN Peng-wan¹, David A. Cendón³, DAI Kai-da¹, ZHONG Fang-ping²

(1.State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 10081, China;2.Northwest Institute of Nuclear Technology, Xi'an 710024, Shaanxi, China;3.Technical University of Madrid，Madrid 28040, Spain)

Received:2015-11-11 Revised:2015-11-11 Online:2016-11-04

摘要/Abstract

摘要： 高聚物粘结炸药(PBX)是战斗部的关键组成部分，其动态力学行为，特别是动态断裂特性关系到战斗部的安全性和使用可靠性。基于内聚裂纹模型，对PBX模拟材料(PBX-M)的动态巴西实验进行数值模拟，对比霍普金森杆实验中测得的拉伸应力曲线，以及高速摄像结合数字图像相关方法得到的试样表面位移场和应变场。对比结果发现，拉伸应力峰值的数值模拟结果比实验结果小约5%，拉应变集中带的数值模拟结果与实验结果的偏差小于15%，验证了内聚裂纹模型的有效性。根据数值模拟结果，探讨了PBX-M试样在动态巴西实验过程中的起裂和裂纹扩展规律，给出了裂纹宽度的定量化信息。

关键词: 兵器科学与技术, 内聚裂纹模型, 动态巴西实验, 高聚物粘结炸药, 数字图像相关方法

Abstract: Polymer bonded explosive (PBX) is the key component of warhead. The dynamic behaviors of PBX, especially dynamic fracture behavior, are crucial issues on the safety and reliability of warhead. By introducing cohesive crack model (CCM), the dynamic explicit software LS-DYNA is used to simulate the dynamic Brazilian experiment on polymer bonded explosive simulant (PBX-M). By comparing with time history of tensile stress obtained by the strain gauge glued on the Hopkinson bar, the displacement fields and strain fields obtained by digital image correlation and high-speed camera, it is found that the tensile stress peak value obtained by numerical simulation is 5% smaller than the experimental result, and the deviation of the concentration zone of tensile strain from experimental data is less than 15%. Thus the validity of CCM is confirmed. The law of crack initiation and propagation of PBX-M sample during dynamic Brazilian experiment is studied from the results of numerical simulation. The quantitative information about crack width in sample is given.

Key words: ordnance science and technology, cohesive crack model, dynamic Brazilian experiment, polymer bonded explosive, digital image correlation method

中图分类号:

崔云霄，陈鹏万， David A. Cendón，戴开达，钟方平. 基于内聚裂纹模型的高聚物粘结炸药模拟材料动态巴西实验的数值模拟[J]. 兵工学报, 2016, 37(9): 1639-1645.

CUI Yun-xiao, CHEN Peng-wan, David A. Cendón, DAI Kai-da, ZHONG Fang-ping. Numerical Simulation of Dynamic Brazilian Test of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model[J]. Acta Armamentarii, 2016, 37(9): 1639-1645.

参考文献

［1］陈鹏万，黄风雷. 含能材料损伤理论及应用［M］. 北京: 北京理工大学出版社, 2006.
CHEN Peng-wan, HUANG Feng-lei. Damage theory and application of energetic materials［M］. Beijing: Beijing Institute of Technology Press, 2006. (in Chinese)
［2］陈鹏，卢芳云，覃金贵，等. 含钨活性材料动态压缩力学性能［J］. 兵工学报, 2015, 36(10): 1861-1866.
CHEN Peng， LU Fang-yun， QIN Jin-gui， et al. Dynamic compressive mechanical properties of tungstenic reactive material［J］. Acta Armamentarii, 2015, 36(10): 1861-1866. (in Chinese)
［3］ Grantham S G, Siviour C R, Proud W G et al. High-strain rate Brazilian testing of an explosive simulant using speckle metrology［J］. Measurement Science and Technology, 2004, 15(9): 1867-1870.
［4］ Palmer S J, Field J E, Huntley J M. Deformation, strengths and strains to failure of polymer bonded explosives ［J］. Proceedings of the Royal Society A: Mathematical Physical and Engineering Sciences, 1993, 440(1909): 399-419.
［5］ Siviour C R, Williamson D M, Grantham S G, et al. Split Hopkinson bar measurements of PBXs［C］∥Proceedings of the Conference of the American Physical Society, Topical Group on Shock Compression of Condensed Matter. Melville, NY:the American Physical Society, 2004: 804-807.
［6］周忠彬, 陈鹏万, 黄风雷. 高聚物粘结炸药模拟材料动态变形破坏的实验研究［J］. 兵工学报, 2010, 31(增刊1): 288-292.
ZHOU Zhong-bin, CHEN Peng-wan, HUANG Feng-lei. Experimental study on dynamic deformation and fracture of polymer bonded explosive simulant ［J］. Acta Armamentarii, 2010, 31(S1): 288-292. (in Chinese)
［7］赵四海. 用粘弹性统计裂纹模型模拟高能炸药的力学响应和非冲击点火［D］. 长沙: 国防科学技术大学, 2011.
ZHAO Si-hai. A viscoelastic statistic crack constitutive model for mechanical response and the non-shock ignition of high explosives［D］. Changsha: National University of Defense Technology, 2011. (in Chinese)
［8］傅华，李俊玲，谭多望. PBX炸药动态Brazilian试验及数值模拟研究［J］. 高压物理学报, 2012, 26(2): 148-154.
FU Hua, LI Jun-ling, TAN Duo-wang. Dynamic Brazilian test and simulation of plastic-bonded explosives［J］. Chinese Journal of High Pressure Physics, 2012, 26(2): 148-154. (in Chinese)
［9］ Guo H, Luo J R, Shi P A. Research on the fracture behavior of PBX under static tension［J］. Defence Technology, 2014, 10(2): 154-160.
［10］张振亚，麻鸳鸳，周风华. 脆性聚甲基丙烯酸甲酯板动态裂纹传播有限元模拟［J］. 兵工学报, 2014, 35(6): 872-878.
ZHANG Zhen-ya, MA Yuan-yuan， ZHOU Feng-hua. Finite element simulation of dynamic crack propagation in brittle PMMA plates［J］. Acta Armamentarii, 2014,35(6): 872-878. (in Chinese)
［11］ Planas J, Elices M, Guinea G V, et al. Generalizations and specializations of cohesive crack models ［J］. Engineering Fracture Mechanics, 2003, 70(14): 1759-1776.
［12］ Sancho J M, Planas J, Cendón D A, et al. An embedded crack model for finite element analysis of concrete fracture ［J］. Engineering Fracture Mechanics, 2007, 74(1): 75-86.
［13］ Reyes E, Gálvez J C, Casati M J, et al. An embedded cohesive crack model for finite element analysis of brickwork masonry fracture［J］. Engineering Fracture Mechanics, 2009, 76(12): 1930-1944.
［14］ Zhou Z B, Chen P W, Duan Z B. Comparative study of the fracture toughness determination of a polymer-bonded explosive stimulant ［J］. Engineering Fracture Mechanics, 2011, 78(17): 2991-2997.

[1]	周伯俊, 于传强，刘志浩，柯冰. 基于高压储能的特种车辆快速起竖技术与验证[J]. 兵工学报, 2022, 43(7): 1488-1497.
[2]	高月光，冯顺山，刘云辉，黄岐. 不同端盖厚度的圆柱形装药壳体破片初速分布[J]. 兵工学报, 2022, 43(7): 1527-1536.
[3]	刘纯，欧卓成，段卓平，黄风雷. 动态加载下高聚物粘结炸药中椭圆孔洞坍塌引起的热点温度及其半经验解析表达[J]. 兵工学报, 2022, 43(1): 57-68.
[4]	刘计划，赵宏立，何昌辉，靳建伟，张邹邹，王琼林，赵宝明. 冲击载荷作用下典型发射药的弹性模量分析方法[J]. 兵工学报, 2021, 42(2): 289-296.
[5]	白志玲，段卓平，黄风雷. 高聚物粘结炸药冲击起爆统计热点反应速率模型[J]. 兵工学报, 2021, 42(11): 2379-2387.
[6]	秦金凤，赵雪，钱华，芮久后. 高致密球形黑索今晶体结构对高聚物粘结炸药安全性能的影响[J]. 兵工学报, 2020, 41(3): 481-487.
[7]	刘坚成，张雷雷，徐坤，皮爱国，史文卿，黄风雷. 反弹道非正侵彻的弹体结构响应实验研究[J]. 兵工学报, 2019, 40(9): 1797-1803.
[8]	魏强，黄西成，陈刚，陈鹏万. 高聚物粘结炸药动态损伤破坏的数值刻画[J]. 兵工学报, 2019, 40(7): 1381-1389.
[9]	李潘，郝志明，刘永平，甄文强. 基于近场动力学非普通状态理论的高聚物粘结炸药损伤破坏模拟研究[J]. 兵工学报, 2018, 39(5): 893-900.
[10]	欧亚鹏，闫石，焦清介，郭学永，孙亚伦. 浇注高聚物粘结炸药的粘结剂体系设计及其应用研究[J]. 兵工学报, 2018, 39(1): 63-70.
[11]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[12]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[13]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[14]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[15]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.

基于内聚裂纹模型的高聚物粘结炸药模拟材料动态巴西实验的数值模拟

Numerical Simulation of Dynamic Brazilian Test of Polymer Bonded Explosive Simulant Based on Cohesive Crack Model

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价