多级气动液压弹射装置建模及性能研究

doi:10.3969/j.issn.1000-1093.2016.08.004

摘要/Abstract

摘要： 分析气动液压弹射方式的两种弹射装置类型，研究一种以压缩空气为动力源、油液为传动介质，且具备油液自缓冲结构的多级气动液压弹射装置的弹射性能。针对弹射过程中气腔气体复杂多变过程、封闭油腔油液流动非线性、多级缸运动关系的不确定性及油液缓冲结构，结合真实气体热力学效应，推导封闭油腔油液的压力动态变化模型及多级缸动力学非线性模型，建立描述多级气动液压弹射过程的数学模型；通过数值求解方法，分析该多级气动液压弹射缸的运动规律及弹射性能。研究结果表明：该多级气动液压弹射缸建压过程迅速，并能在0.2 s内以2.4 m有效弹射行程，将重1.5 t负载加速至19 m/s，弹射最大过载不超过16 g，且相邻两级缸的相对速度不超过15 m/s. 分析气动液压弹射方式的两种弹射装置类型，研究一种以压缩空气为动力源、油液为传动介质，且具备油液自缓冲结构的多级气动液压弹射装置的弹射性能。针对弹射过程中气腔气体复杂多变过程、封闭油腔油液流动非线性、多级缸运动关系的不确定性及油液缓冲结构，结合真实气体热力学效应，推导封闭油腔油液的压力动态变化模型及多级缸动力学非线性模型，建立描述多级气动液压弹射过程的数学模型；通过数值求解方法，分析该多级气动液压弹射缸的运动规律及弹射性能。研究结果表明：该多级气动液压弹射缸建压过程迅速，并能在0.2 s内以2.4 m有效弹射行程，将重1.5 t负载加速至19 m/s，弹射最大过载不超过16 g，且相邻两级缸的相对速度不超过15 m/s.

关键词: 兵器科学与技术, 压缩空气, 多级缸, 气动液压弹射

Abstract: A novel multi-stage pneumatic and hydraulic catapult device with oil buffering structure，which utilizes compressed air as impetus and hydraulic fluid as transmission medium, is introduced and its ejection performance is researched by analyzing two typical catapult devices involving pneumatic and hydraulic catapult. According to the complex polytropic process of gas, the flow nonlinearity of hydraulic fluid in enclosed chamber, motion uncertainty of multi-stage cylinders and the self-buffering structure, a mathematical model describing multi-stage pneumatic and hydraulic catapult process is established based on real gas thermodynamic effect. Meanwhile, the dynamic variation model of oil pressure in enclosed chamber and the nonlinear dynamic model of multi-stage cylinders are constructed. The motion laws and working performance of multi-stage pneumatic and hydraulic catapult cylinder are obtained through numerical simulation. The results show that the proposed multi-stage pneumatic and hydraulic catapult device can generate the appropriate pressure quickly and accelerate the load up to 19 m/s within 0.2 s with the speed-up distance of 2.4 m, and thus the overload is less than 16 g and the relative velocity between two adjacent cylinders is less than 15 m/s.

Key words: ordnance science and technology, compressed air, multi-stage cylinder, pneumatic and hydraulic catapult

中图分类号:

TJ768

任锐，马大为，姚琳，刘峥，何强. 多级气动液压弹射装置建模及性能研究[J]. 兵工学报, 2016, 37(8): 1365-1372.

REN Rui， MA Da-wei， YAO Lin， LIU Zheng, HE Qiang. Theoretical Modeling and Performance Research on Multi-stage Pneumatic and Hydraulic Catapult Device[J]. Acta Armamentarii, 2016, 37(8): 1365-1372.

参考文献

［1］赵伟, 黄钰曌, 俞浙青, 等. 高速弹射实验装置液压动力系统[J]．浙江大学学报:工学版, 2014, 48(5):799-804.
ZHAO Wei, HUANG Yu-zhao, YU Zhe-qing, et al. Hydraulic power system of high speed ejection experiment device[J]. Journal of Zhejiang University: Engineering Science, 2014, 48(5):799-804. (in Chinese)
[2] 马琳. 气液弹射机构设计及动态特性研究[D]. 杭州:浙江工业大学, 2009:12-14.
MA Lin. Study on gas-liquid ejection launcher design and dynamic characteristics[D]. Hangzhou: Zhejiang University of Technology, 2009:12-14. (in Chinese)
[3] 张永亮, 范文欣, 田野. 气液压弹射动力学影响参数分析[J]. 四川兵工学报,2015,36(1):56-59.
ZHANG Yong-liang, FAN Wen-xin, TIAN Ye. Study on dynamic ejection force of numerical parameters of pneumatic and hydraulic launching [J]. Journal of Sichuan Ordnance ,2015,36(1):56-59.(in Chinese)
[4] 权凌霄,刘建伟,宋育,等. 无人机气液压弹射系统建模与弹射过程仿真分析[J]. 液压与气动, 2016(1):71-77.
QUAN Ling-xiao, LIU Jian-wei, SONG Yu, et al. Modeling of pneudraulic launching system of UAV and simulation analysis of launching process [J]. Chinese Hydraulics & Pneumatics, 2016(1): 71-77. (in Chinese)
[5] 胡真华, 胡爱武, 胡宣哲, 等. 冷弹射方法及装置:中国, 20910166299[P]. 2010-03-24.
HU Zhen-hua, HU Ai-wu, HU Xuan-zhe, et al. Cold ejection method and device:China, 20910166299[P]. 2010-03-24. (in Chinese)
[6] 李悦, 张海黎. 无人机气液压发射原理试验研究[J]. 南京航空航天大学学报, 2010, 42(6):699-703.
LI Yue, ZHANG Hai-li. Principle experiments of hydraulic and pneumatic launching of UAV[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2010, 42(6): 699-703. (in Chinese)
[7] 赵伟, 阮健, 李胜, 等. 液压弹射机构动力系统研究[J]. 兵工学报, 2013, 34(4):459-464.
ZHAO Wei, RUAN Jian, LI Sheng, et al. Research on power system of hydraulic catapult mechanism[J]. Acta Armamentarii, 2013, 34(4):459-464.(in Chinese)
[8] 阮健, 赵伟, 李胜. 新型气液混合动力弹射装置:中国, 201010524849[P]. 2011-04-06.
RUAN Jian, ZHAO Wei, LI Sheng. Novel hydraulic and pneumatic catapult device: China, 201010524849[P]. 2011-04-06. (in Chinese)
[9] 谢英俊. 高速液压上抛系统的关键技术研究[D].杭州:浙江大学, 2000.
XIE Ying-jun. Researches onfundamental techniques of the hydraulic catapult system[D].Hangzhou: Zhejiang University, 2000.(in Chinese)
[10] 李悦, 裴锦华. 无人机气液压发射动力学数值仿真[J].机械工程学报, 2011, 47(8):183-190.
LI Yue, PEI Jin-hua. Dynamic numerical simulation of the pneumatic and hydraulic launching of UAV[J]. Journal of Mechanical Engineering, 2011, 47(8):183-190.(in Chinese)
[11] 杨风波, 马大为, 杨帆, 等. 高压弹射装置内弹道建模与计算[J].兵工学报, 2013, 34(5):527-534.
YANG Feng-bo, MA Da-wei, YANG Fan, et al. Interior ballistics modeling and calculation of high-pressure ejection device[J]. Acta Armamentarii, 2013, 34(5):527-534.(in Chinese)
[12] 董富祥, 洪嘉振. 多体系统动力学碰撞问题研究综述[J].力学进展, 2009, 39(3):352-359.
DONG Fu-xiang, HONG Jia-zhen. Review of impact problem for dynamics of multibody system[J]. Advances in Mechanics, 2009, 39(3):352-359.(in Chinese)
[13] 杨风波, 马大为, 朱忠领, 等. 基于真实热力学过程分析的气动弹射性能研究[J]. 机械工程学报, 2013, 49(24):167-174.
YANG Feng-bo, MA Da-wei, ZHU Zhong-ling, et.al. Pneumatic catapult performance research based on the true thermodynamic process analysis[J]. Journal of Mechanical Engineering, 2013, 49(24):167-174.(in Chinese)
[14] 成大先, 王德夫, 姜勇, 等.机械设计手册[M].第5版.北京:化学工业出版社, 2008:21-299.
CHENG Da-xian, WANG De-fu, JIANG Yong, et al. Mechanical design handbook[M]. 5th ed. Beijing: Chemical Industry Press, 2008:21-299.(in Chinese)

[1]	李博平，李国庆，张笈玮，吕宏亮，武军，李孟源，李聪睿. 压缩空气弹射系统内弹道特性[J]. 兵工学报, 2021, 42(12): 2606-2616.
[2]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[3]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[4]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[5]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[6]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[7]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[8]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[9]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[10]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[11]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[12]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[13]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[14]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.
[15]	张亚舟，李贞晓，程年恺，田慧，栗保明. 一种真空触发开关脉冲电源系统研究[J]. 兵工学报, 2017, 38(8): 1469-1475.