基于核密度估计的履带车辆传动轴载荷谱编制

doi:10.3969/j.issn.1000-1093.2017.09.021

摘要/Abstract

摘要： 为了建立军用履带车辆传动轴典型路面上的高可靠性载荷谱，通过实车试验采集接近实际使用情况的扭矩载荷及相关行车数据，由最少测试次数判据计算出载荷数据样本的置信度。由于试验载荷数据具有不规则的均幅值二维分布，基于二维核密度估计设计编谱流程，采取2次雨流计数，第1次雨流计数结果用于均幅值极值推断，第2次雨流计数结果用于核密度估计，既能很好地拟合均幅值分布，又能对实测雨流矩阵做合理外推。在获得典型路面使用寿命里程的二维设计载荷谱后，通过等损伤转换方法，将二维谱转化为以幅值为变量的8级程序块谱，并给出传动轴扭矩和转速的联合加载方法。研究结果表明，从疲劳损伤角度选择低载，舍去阈值为第8级幅值的0.8倍，频次和减少99.33%而损伤和只减少0.29%，可加速疲劳加载试验。

关键词: 兵器科学与技术, 车辆传动, 载荷谱, 核密度估计, 疲劳分析

Abstract: For establishing the high reliability load spectrum for transmission shaft of military tracked vehicle on the typical road, the torque and relevant vehicle data similar to that in real service conditions was collected through vehicle experiments, and the confidence level of load data samples was calculated based on the criteria of least testing times. A load spectrum compiling procedure is designed based on 2-D kernel density estimation on account of the irregular 2-D distribution of amplitude and mean values in test load data. In the load spectrum compiling procedure, two times of rain-flow counting are adopted: the first rain-flow counting result is used to deduce the extrema of amplitude and mean values, and the second rain-flow counting result is used to extrapolate the kernel density. This compiling procedure can not only obtain better fitting of amplitude and mean distribution, but also achieve the reasonable extrapolation of the experimental rain-flow matrix. Goodman equation and the equivalent damage conversion method are used to derive 8-level program block load spectrum from 2-D load spectrum, and a loading method for the combination of torque and rotational speed is presented. 0.8 times of eighth amplitude are chosen as the value of small load from the perspective of fatigue damage, and total cycles are decreased by 99.33% while total damage is decreased only by 0.29%, which can accelerate the fatigue loading test. Key

Key words: ordnancescienceandtechnology, vehicletransmission, loadspectrum, kerneldensityestimation, fatigueanalysis

中图分类号:

TJ810.3⁺22

刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.

LIU Hai-ou, ZHANG Wen-sheng, XU Yi, ZHAO Zi-ye. Load Spectrum Compiling for Transmission Shaft of Tracked Vehicle Based on Kernel Density Estimation[J]. Acta Armamentarii, 2017, 38(9): 1830-1838.

参考文献

［1］赵少汴,王忠保. 抗疲劳设计:方法与数据[M]. 北京: 机械工业出版社,1997:81-88.
ZHAO Shao-bian, WANG Zhong-bao. Anti-fatigue design: me-thods and data[M]. Beijing: China Machine Press, 1997:81-88. (in Chinese)
[2］ Lee Y L. Fatigue testing and analysis: theory and practice[M]. London, UK: Butterworth-Heinemann, 2005:77-102.
[3］阎楚良,高镇同. 飞机高置信度中值随机疲劳载荷谱的编制原理[J]. 航空学报,2000,21(2):118-123.
YAN Chu-liang, GAO Zhen-tong. Compilation theory of median stochastic fatigue load spectrum with high confidence level for airplane [J]. Acta Aeronautica et Astonautica Sinica, 2000, 21(2): 118-123. (in Chinese)
[4］安东诺夫В М. 军用履带车辆传动装置[M]. 王红岩，芮强，高连华，等，译. 北京:国防工业出版社, 2014:183-208.
Antonov В М. Military tracked vehicle transmission device [M]. WANG Hong-yan, RUI Qiang, GAO Lian-hua, et al, translated. Beijing: National Defense Industry Press, 2014:183-208. (in Chinese)
[5］ Zuo F J, Huang H Z, Zhu S P, et al. Fatigue life prediction under variable amplitude loading using a non-linear damage accumulation model[J]. International Journal of Damage Mechanics, 2015,24(5): 767-784.
[6］ Botev Z I, Grotowski J F, Kroese D P. Kernel density estimation via diffusion[J]. The Annals of Statistics, 2010, 38(5): 2916-2957.
[7］ Wang J X, Liu Y, Zeng X H, et al. Selection method for kernel function in nonparametric extrapolation based on multicriteria decision-making technology[J]. Mathematical Problems in Engineering, 2013 (8) :561-576.
[8］李莺莺, 杨清淞, 刘志东, 等. 挖掘机液压泵载荷分析及编谱方法研究[J]. 工程机械, 2015，46 (2): 14-20.
LI Ying-ying, YANG Qing-song, LIU Zhi-dong, et al. A study on load analysis and compilation method of load spectrum for excavator's hydraulic pumps[J]. Construction Machinery and Equipment, 2015,46 (2): 14-20. (in Chinese)
[9］李研. 轮式装载机载荷谱编制中非参数外推方法研究[D].长春:吉林大学,2016:21-38.
LI Yan. Research on non-parametric extrapolation method in compiling load spectra of wheel loader[D]. Changchun: Jilin University, 2016:21-38. (in Chinese)

[10］ Heuler P, Kltschke H. Generation and use of standardised load spectra and load-time histories[J]. International Journal of Fatigue, 2005, 27(8): 974-990.
[11］ Xiong J J, Shenoi R A. A load history generation approach for full-scale accelerated fatigue tests[J]. Engineering Fracture Mechanics, 2008, 75(10):3226-3243.
[12］闫楚良. 飞机载荷谱实测技术与编制原理[M]. 北京: 航空工业出版社, 2010:212-239.
YAN Chu-liang. Measurement technology and compilation theory of load spectrum for aircraft[M]. Beijing: Aviation Industry Press, 2010:212-239. (in Chinese)
[13］王继新, 季景方, 胡际勇, 等. 基于贝叶斯理论的工程车辆载荷样本长度计算方法[J]. 农业工程学报, 2011, 27(6): 148-151.
WANG Ji-xin, JI Jing-fang, HU Ji-yong, et al. Bayesian method for determination of load sample size in engineering vehicles [J]. Transactions of the Chinese Society of Agricultural Engineering, 2011, 27(6): 148-151.(in Chinese)
[14］ Lee Y L, Barkey M E, Kang H T. Metal fatigue analysis handbook: practical problem-solving techniques for computer-aided engineering[M]. Oxford, UK: Butterworth-Heinemann, 2011:61-87.
[15］郑松林, 梁国清, 王治瑞, 等. 考虑低幅锻炼载荷的某轿车摆臂载荷谱编制[J]. 机械工程学报, 2014, 50(16): 147-154.
ZHENG Song-lin, LIANG Guo-qing, WANG Zhi-rui, et al. Compilation of automotive lower control arm spectrum based on the low-amplitude training load[J]. Journal of Mechanical Engineering, 2014, 50(16): 147-154.(in Chinese)
[16］ Scott D W. Multivariate density estimation: theory, practice, and visualization[M]. 2nd ed. Hoboken, US: John Wiley & Sons, 2015:137-192.
[17］项昌乐.车辆传动系轴类零件疲劳设计与变矩器动态特性研究[D].北京:北京理工大学,2001:7-26.
XIANG Chang-le. The study on fatigue design of the axles and the dynamic characteristics of the torque converter in the vehicle transmission system[D]. Beijing: Beijing Institute of Technology,2001:7-26. (in Chinese)
[18］ Kadhim N A, Mustafa M, Varvani-Farahani A. Fatigue life prediction of low-alloy steel samples undergoing uniaxial random block loading histories based on different energy-based damage descriptions[J]. Fatigue & Fracture of Engineering Materials & Structures, 2015, 38(1): 69-79.
[19］张英爽. 装载机传动系载荷谱的测取与应用研究[D]. 长春: 吉林大学, 2014:20-23.
ZHANG Ying-shuang. Research on the load spectra acquisition and application of loader powertrain[D]. Changchun: Jilin University, 2014:20-23. (in Chinese)

第38卷
第9期2017 年9月兵工学报ACTA
ARMAMENTARIIVol.38No.9Sep.2017

[1]	张金豹，邹天刚，高秀才，黄瑞颜，桂鹏，柳泓蛰. 基于中位秩加权的车辆传动装置直驶模式传递效率性能评估[J]. 兵工学报, 2022, 43(S1): 54-59.
[2]	徐保荣, 王涛, 梁梓. 基于操纵动作预测的履带车辆载荷谱编制方法与流程[J]. 兵工学报, 2022, 43(2): 252-259.
[3]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[4]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[5]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[6]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[7]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[8]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[9]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[10]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[11]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[12]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[13]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[14]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.
[15]	张亚舟，李贞晓，程年恺，田慧，栗保明. 一种真空触发开关脉冲电源系统研究[J]. 兵工学报, 2017, 38(8): 1469-1475.