[1] 计时鸣, 曾晰, 金明生,等. 软固结磨粒群加工方法及材料去除特性的分析[J]. 机械工程学报, 2013, 49(5): 173-181. JI S M,ZENG X,JIN M S,et al. New finishing method of softness consolidation abrasives and material removal characteristic analysis[J]. Journal of Mechanical Engineering, 2013, 49(5): 173-181.(in Chinese) [2] 王卓. 光学材料加工亚表面损伤检测及控制关键技术研究[D]. 长沙:国防科学技术大学,2008. WANG Z. Research on key technologies of subsurface damage detection and control in optical materials processing[D].Changsha: National University of Defense Technology, 2008. (in Chinese) [3] 蔡立,田守信.光学元件加工技术[M].武汉:华中工学院出版社,1987. CAI L, TIAN S X. Optical component processing technology[M]. Wuhan: Huazhong Institute of Technology Press, 1987. (in Chinese)
[4] WALKER D D, BALDWIN A, EVANS R, et al. A quantitative comparison of three grolishing techniques for the precessions[J]. Proceedings of SPIE, 2007, 6671: 66711H-1-66711H-9. [5] 朱传睿. 基于五轴混联气囊抛光机的气囊抛光工艺研究[D]. 哈尔滨:哈尔滨工业大学, 2016. ZHU C R, Research on bonnet polishing process based on five axis hybrid machine[D].Harbin:Harbin Institute of Technology, 2016. (in Chinese)
[6] CHEUNG C F, KONG L B, HO L T, et al. Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing[J].Precision Engineering, 2011, 35(4): 574-590. [7] JAKOBSEN P D, LANGMAACK L, DAHL F, et al. Development of the soft ground abrasion tester (SGAT) to predict TBM tool wear, torque and thrust[J]. Tunnelling and Underground Space Technology, 2013, 38(9): 398-408. [8] SONG J F, YAO Y X, DONG Y G, et al. Prediction of surface quality considering the influence of the curvature radius for polishing of a free-form surface based on local shapes[J]. International Journal of Advanced Manufacturing Technology, 2017, 95(1): 1-15. [9] HUAI W B, TANG H, SHI Y Y, et al. Prediction of surface roughness ratio of polishing blade of abrasive cloth wheel and optimization of processing parameters[J]. International Journal of Advanced Manufacturing Technology, 2016, 90(1/2/3/4): 1-10.
[10] 曾晰, 潘烨, 计时鸣. 芳纶浆粕纤维增强均质气压砂轮特性[J].复合材料学报, 2017, 34(10): 2321-2329. ZENG X, PAN Y, JI S M. Characteristic of AFRP pneumatic wheel[J]. Acta Materiae Compositae Sinica, 2017, 34(10): 2321-2329. (in Chinese)
[11] 郑颖人,沈珠江,龚晓南. 岩土塑性力学原理[M]. 北京:中国建筑工业出版社,2003. ZHEN Y R, SHEN Z J, GONG X N. Principle of rock mechanics[M]. Beijing: China Building Industry Press, 2003. (in Chinese)
[12] CHRISTOFFERSEN J, MEHRABADI M M, NEMAT-NASSER S. A micromechanical description of granular material behavior[J]. Journal of Applied Mechanics, 1981, 48(2): 339-344. [13] KRUYT N P, ROTHENBURG L. Micromechanical definition of the strain tensor for granular materials[J]. Journal of Applied Mechanics, 1996, 63(3): 706-711. [14] BAGI K. Stress and strain in granular assemblies[J]. Mechanics of Materials, 1996, 22(3): 165-177. [15] LI X, YU H S, LI X S. Macro-micro relations in granular mechanics[J]. International Journal of Solids and Structures, 2009, 46(25/26): 4331-4341. [16] JOHNSON K L, KENDALL K, ROBERTS A D. Surface energy and the contact of elastic solids[J]. Proceedings of the Royal Society of London, 1971, 324(1558): 301-313. [17] THORNTON C. Interparticle sliding in the presence of adhesion[J]. Journal of Physics D: Applied Physics, 1991, 24(11): 1942-1946. [18] 迟杰明,赵成刚,李小军. 砂土剪胀机理的研究[J]. 土木工程学报, 2009, 42(3): 99-104. CHI J M, ZHAO C G, LI X J. Study on the mechanism of sand dilatancy[J]. Journal of Civil Engineering, 2009,42(3):99-104. (in Chinese)
[19] 迟杰明,赵成刚,李小军. 剪胀性砂土本构模型的研究[J]. 岩土力学, 2008, 29(11): 2939-2944. CHI J M, ZHAO C G, LI X J. Study on constitutive model of dilatancy sand[J]. Rock and Soil Mechanics, 2008, 29(11): 2939-2944. (in Chinese)
[20] ISHIHARA K, TATSUOKA F, YASUADA S. Undrained deformation and liquefaction of sand under cyclic stress[J]. Soils and Foundations, 2008, 15(1): 29-44. [21] LI X S, DAFALIAS Y F. Dilatancy for cohesionless soils[J]. Geotechnique, 2000, 50(4): 449-460. [22] 沈珠江. 理论土力学[M].北京:中国水利水电出版社,2000. SHEN Z J. Theoretical soil mechanics[M]. Beijing: China Water Conservancy and Hydropower Press,2000. (in Chinese)
[23] 计时鸣,许亚敏,金明生,等. 软固结磨粒气压砂轮的力学特性分析[J].中国机械工程, 2012, 23(19): 2366-2372. JI S M, XU Y M, JIN M S, et al. Mechanical analysis of pressure grinding wheel with soft abrasive consolidation[J].China Mechanical Engineering, 2012, 23(19): 2366-2372. (in Chinese)
第40卷第5期 2019 年5月兵工学报ACTA ARMAMENTARIIVol.40No.5May2019
|