[1] 李壮云. 液压元件与系统[M]. 第3版. 北京:机械工业出版社, 2014:68-73. LI Zhuang-yun. Hydraulic elements and system [M]. 3rd ed. Beijing: Mechanical Industry Press, 2014. (in Chinese) [2] 王意. 车辆与行走机械的静液压驱动[M]. 北京:化学工业出版社, 2014. WANG Yi. Hydrostatic transmissions for vehicle and mobile machinery[M]. Beijing: Chemical Industry Press, 2014. (in Chinese) [3] 林硕, 苑士华, 刘洪. 考虑油膜非均匀性的滑靴润滑特性研究[J]. 北京理工大学学报, 2014, 34(4): 358-362. LIN Shuo, YUAN Shi-hua, LIU Hong. Analysis on lubrication characteristics of slipper bearing considering un-uniform gap[J]. Transactions of Beijing Institute of Technology, 2014, 34(4): 358-362.(in Chinese) [4] 王智慧, 苑士华, 彭增雄. 柱塞副油膜温度分布的数值分析[J]. 汽车工程, 2013, 35(9): 781-784. WANG Zhi-hui, YUAN Shi-hua, PENG Zeng-xiong. Numerical analysis on the temperature distribution of oil-film in plunger pair[J]. Automotive Engineering, 2013, 35(9): 781-784. (in Chinese) [5] Pelosi M, Ivantysynova M. The impact of axial piston machines mechanical parts constraint conditions on the thermo-elastohydrodynamic lubrication analysis of the fluid film interfaces[J]. International Journal of Fluid Power, 2013, 14(3): 35-51. [6] 张静, 胡亮, 李小军, 等. 基于虚拟样机技术的轴向柱塞泵回程盘动力学特性仿真分析[J]. 液压与气动, 2016(3): 86-91. ZHANG Jing, HU Liang, LI Xiao-jun, et al. The dynamic characteristic simulation of retainer plate in axial piston pump based on virtual prototype technology[J]. Chinese Hydraulics & Pneumatics, 2016(3): 86-91.(in Chinese) [7] 曲庆文, 刘源勇, 钟振远, 等. 关节轴承的设计特点及分析[J]. 润滑与密封, 2004, 164(4): 102-105. QU Qing-wen, LIU Yuan-yong, ZHONG Zhen-yuan, et al. Design characteristic and analysis for the spherical plain bearing[J]. Lubrication Engineering, 2004, 164(4): 102-105.(in Chinese) [8] 牛劲草. 向心关节轴承应力场分析及寿命预测方法研究[D]. 洛阳:河南科技大学,2013 NIU Jin-cao. Study on the three-dimensional stress fields and wear-life estimation method for spherical plain bearings[D]. Luoyang: Henan University of Science and Technology, 2013.(in Chinese) [9] 向定汉,王春艳,董伟峰. 向心关节轴承的结构优化及摩擦磨损性能研究[J]. 摩擦学学报, 2004, 24(6): 564-567. XIANG Ding-hai, WANG Chun-yan, DONG Wei-feng. Structural optimization and friction and wear behavior of a radial spherical plain bearing[J]. Tribology, 2004, 24(6): 564-567.(in Chinese)
[10] Fang X, Zhang C, Chen X, et al. Newly developed theoretical solution and numerical model for conformal contact pressure distribution and free-edge effect in spherical plain bearings[J]. Tribology International, 2015, 84: 48-60. [11] Germaneau A, Peyruseigt F, Mistou S, et al. Verification of a spherical plain bearing finite-element model using scattered light photoelasticitytests[J]. Proceedings of Institution Mechanical Engineers Part J: Journal of Engineering Tribology, 2008, 222(5): 647-656. [12] Jakobsson B O, Floberg L. The finite journal bearing considering vaporization[D]. Goteborg, Sweden: Chalmers University of Technology, 1957. [13] Olsson K O. Cavitation in dynamically loaded journal bearings[D]. Goteborg, Sweden: Chalmers University of Technology, 1964. [14] Bosch Rexroth AG Hydraulics Axial Piston Units. A4VG series 32 operating instructions: RE920003-01-B/04.08 [Z/OL]. Germany: Bosch Rexroth Group, 2008. http:∥www.boschrexroth.com/brm. [15] 温诗铸, 黄平. 摩擦学原理[M]. 第4版. 北京: 清华大学出版社, 2012. WEN Shi-zhu, HUANG Ping. Principles of tribology [M]. 4th ed. Beijing: Tsinghua University Press, 2012. (in Chinese) [16] Payvar P, Salant R F. A computational method for cavitation in a wavy mechanical seal[J]. Journal of Tribology, 1992, 114(1): 199-204.
第38卷 第3期2017 年3月兵工学报ACTA ARMAMENTARIIVol.38No.3Mar.2017
|