[1] 章伊华, 林丹益, YANG Guo-yu. 基于接触理论的螺栓联接接触面力学特性研究[J]. 兵工学报, 2015, 36(5): 946-952. ZHANG Yi-hua, HOU Pei-hai, YANG Guo-yu. Research on mechanical properties of contact surfaces in bolt joints [J]. Acta Armamentarii, 2015, 36(5):946-952.(in Chinese) [2] Marshall M B, Lewis R, Dwyer-Joyce R S. Characterization of contact pressure distribution in bolted joints[J]. Strain, 2006, 42(1): 31-43. [3] 祖炳锋, 付光琦, 徐玉梁, 等. 车用柴油机缸孔在缸盖螺栓预紧力下变形的数值模拟与试验研究[J]. 内燃机工程, 2010, 31(2):98-104. ZU Bing-feng, FU Guang-qi, XU Yu-liang, et al. Numerical simulation and experimental investigation on cylinder bore deformation of automotive diesel engines under cylinder-head bolt pre-tightened[J]. Chinese Internal Combustion Engine Engineering, 2010, 31(2): 98-104.(in Chinese) [4] 杜洪奎, 袁昌明. 螺栓疲劳寿命预测[J]. 机械设计, 2008, 25(2):10-12. DU Hong-kui, YUAN Chang-ming. Prediction on the fatigue life-span of bolts[J]. Journal of Machine Design, 2008, 25(2):10-12.(in Chinese) [5] 闫亚杰, 雷宏刚, 焦晋峰, 等. 螺栓球节点网架结构中高强度螺栓常幅疲劳计算方法的建立[J]. 建筑结构学报, 2010, 31(增刊1):92-97. YAN Ya-jie, LEI Hong-gang, JIAO Jin-feng, et al. Constant amplitude fatigue calculation method of high strength bolts in grid structures with bolt sphere joints[J]. Journal of Building Structures, 2010, 31(S1):92-97.(in Chinese) [6] 周芬, 欧阳卿, 杜运兴, 等. 螺栓球网架节点高强螺栓的疲劳性能研究[J]. 湖南大学学报:自然科学版, 2014, 41(11):32-36. ZHOU Fen, OUYANG Qing, DU Yun-xing, et al. Fatigue study on high strength bolts in bolted sphere joints of grid structure[J]. Journal of Hunan University:Natural Sciences, 2014, 41(11):32-36. (in Chinese) [7] Saeed M, Majeed S, Hassan K. Reliability analysis of fatigue crack initiation of railhead in bolted rail joint[J]. Engineering Failure Analysis, 2013, 29(1):132-148. [8] Lin S R, Wu W F. Estimation of maximum axial force of anchor bolts in consideration of random bolt failures[J]. International Journal of Pressure Vessels and Piping, 2015, 131:52-59. [9] Huda F, Kajiwara I, Hosoya N, et al. Bolt loosening analysis and diagnosis by non-contact laser excitation vibration tests[J]. Mechanical Systems and Signal Processing, 2013, 40(2):589-604.
[10] 徐鸿, 郑善合, MAILE Karl.超(超)临界汽轮机汽缸紧固螺栓疲劳-蠕变断裂的研究[J]. 中国电机工程学报, 2007, 27(32): 63-66. XU Hong, ZHENG Shan-he, MAILE Karl. Research on the fatigue-creep rupture of fastening bolts of ultra-supercritical steam turbine cylinder case [J].Proceedings of the CSEE, 2007, 27(32): 63-66.(in Chinese) [11] 郭文芳, 冯继军, 彭贤锋, 等. 某发动机胀断连杆螺栓松脱失效分析[J]. 理化检验:物理分册, 2016, 52(4): 274-277. GUO Wen-fang, FENG Ji-jun, PENG Xian-feng, et al. Failure analysis on looseness of fractured connecting rod bolt of an engine[J]. Physical Testing and Chemical Analysis Part A:Physical Testing, 2016, 52(4):274-277.(in Chinese) [12] Benedetti M D, Garofalo G, Zumpano M, et al. On the damping effect due to bolted junctions in space structures subjected to pyro-shock[J]. Acta Astronautica, 2007, 60(12): 947-956.
第38卷 第3期2017 年3月兵工学报ACTA ARMAMENTARIIVol.38No.3Mar.2017
|