纳米纤维素纤维的表面改性及其对硝化纤维素膜力学性能的影响

doi:10.3969/j.issn.1000-1093.2016.02.010

兵工学报 ›› 2016, Vol. 37 ›› Issue (2): 260-264.doi: 10.3969/j.issn.1000-1093.2016.02.010

纳米纤维素纤维的表面改性及其对硝化纤维素膜力学性能的影响

王文俊¹，崔小月¹，朱海东¹，邵自强¹，左英英²

（1.北京理工大学材料学院，北京 100081； 2.山西北方兴安化学工业有限公司山西太原 030082）

收稿日期:2015-07-09 修回日期:2015-07-09 上线日期:2016-04-22
通讯作者: 王文俊 E-mail:wangwenjun@bit.edu.cn
作者简介:王文俊（1967—），女，副教授

Surface Modification of Cellulose Nano-fiber and Its Effect on Mechanical Properties of Nitrocellulose Film

WANG Wen-jun¹, CUI Xiao-yue¹, ZHU Hai-dong¹, SHAO Zi-qiang¹, ZUO Ying-ying²

(1.School of Materials Science and Engineering, Beijing Institute of Technology， Beijing 100081, China;2.Shanxi North Xingan Chemical Industry Ltd.,Co., Taiyuan 030082, Shanxi, China)

Received:2015-07-09 Revised:2015-07-09 Online:2016-04-22
Contact: WANG Wen-jun E-mail:wangwenjun@bit.edu.cn

摘要/Abstract

摘要： 采用2，2，6，6-四甲基哌啶氧自由基（TEMPO）氧化-机械法制备纳米纤维素纤维（CNF），通过碱化处理，剥离其带有羧基的表层，以硝酸/二氯甲烷混合物为硝化剂对CNF表面进行硝酸酯化改性，改性产物(NCNF)可稳定悬浮和均匀分散于丙酮中。采用红外光谱、元素分析和透射电子显微镜对NCNF的结构与性能进行分析与表征。将NCNF作为增强相添加到硝化纤维素中，采用溶液浇铸法制备纳米复合膜，并对纳米复合膜的拉伸性能进行测试。测试结果表明：添加质量百分比为3.5%的NCNF可使膜的拉伸强度、杨氏模量、断裂伸长率3个指标均得到显著提高。同时，将以上结果与长径比较低的纳米纤维素晶须（CNW）纳米复合膜的拉伸性能进行了对比分析，分析结果表明CNF比CNW对硝化纤维素膜拉伸性能的改善效果更好。

关键词: 兵器科学与技术, 纳米纤维素纤维, 纳米纤维素晶须, 纳米复合材料, 纤维素硝酸酯, 拉伸性能

Abstract: Cellulose nano-fibers(CNFs) are prepared by TEMPO-mediated oxidation combined with homogenizing mechanical treatment. The carboxyl groups on the surface of CNFs are removed by an alkalization process. Then CNFs are chemically modified by a mixture of nitric acid and dichloromethane to obtain nitrified CNF(NCNF). NCNFs could readily suspend and well disperse in acetone. The structure and properties of NCNFs are examined using Fourier transform infrared spectroscopy (FTIR)，elemental analysis (EA)，and transmission electron microscopy (TEM). The nano-nitrocellulose composite films with NCNF as reinforcment are prepared by a casting/evaporation technique. The tensile properties of the nanocomposite films are tested. The results show that the tensile strength，Young’s modulus，and elongation at break of the nanocomposite films increase simultaneously in comparison with that of neat NC. The influence of cellulose nanowhiskers(CNWs) and CNFs on the tensile properties of nanocomposite films is studied. As reinforcement, CNFs demonstrate higher efficiency compared to CNWs because of their larger aspect ratio.

Key words: ordnance science and technology, cellulose nanofiber, cellulose nanowhisker, nanocomposite, nitrocellulose, tensile property

中图分类号:

TB33

王文俊，崔小月，朱海东，邵自强，左英英. 纳米纤维素纤维的表面改性及其对硝化纤维素膜力学性能的影响[J]. 兵工学报, 2016, 37(2): 260-264.

WANG Wen-jun, CUI Xiao-yue, ZHU Hai-dong, SHAO Zi-qiang, ZUO Ying-ying. Surface Modification of Cellulose Nano-fiber and Its Effect on Mechanical Properties of Nitrocellulose Film[J]. Acta Armamentarii, 2016, 37(2): 260-264.

参考文献

［1］ turcová A, Davies G R, Eichhorn S J. Elastic modulus and stress-transfer properties of tunicate cellulose whiskers[J]. Biomacromolecules, 2005, 6(2):1055-1061.
[2］ Favier V, Chanzy H, Cavaille J Y. Polymer nanocomposites reinforced by cellulose whiskers[J]. Macromolecules, 1995, 28(18):6365-6367.
[3］ Wu Q J, Henriksson M, Liu X H, et al.A high strength nanocomposite based on microcrystalline cellulose and polyurethane[J]. Biomacromolecules, 2007, 8(12):3687-3692.
[4］ Azizi Samir M A S, Alloin F, Sanchez J Y, et al. Nanocomposit polymer electrolytes based on poly(oxyethylene) and cellulose whisker[J]. Macromolecules, 2004, 37(4):1386 -1393.
[5］ Habibi Y, Goffin A L, Schiltz N, et al. Bionanocomposites based on poly(ε-caprolactone)-grafted cellulose nanocrystals by ring-opening polymerization[J]. Journal of Materials Chemistry A, 2008, 18(41):5002-5010.
[6] Alemdar A, Sain M. Biocomposites from wheat straw nanofibers:morphology, thermal and mechanical properties[J]. Composites Science and Technology, 2008, 68(2):557-565.
[7] Bulota M, Vesterinen A H, Hughes M, et al. Mechanical behavior, structure, and reinforcement processes of TEMPO-oxidized cellulose reinforced poly(lactic) acid[J]. Polymer Composites, 2013, 34(2):173-179.
[8] Tang L, Weder C. Cellulose whisker/epoxy resin nanocomposites[J]. Applied Materials & Interfaces, 2010, 2(4):1073-1080.
[9] Zhou C, Wu Q, Yue Y, et al. Application of rod-shaped cellulose nanocrystals in polyacrylamide hydrogels[J]. Journal of Colloid and Interface Science, 2011, 353(1):116-123.
[10] Yuwawech K, Wootthikanokkhan J, Tanpichai S. Effects of two different cellulose nanofiber types on properties of poly(vinyl alcohol) composite films[J]. Journal of Nanomaterials, 2015, 2015:1-10.
[11］王文俊, 冯蕾, 邵自强, 等. 纳米纤维素晶须/硝化纤维素复合材料的制备与力学性能研究[J]. 兵工学报, 2012, 33(10)： 1174-1177.
WANG Wen-jun, FENG Lei, SHAO Zi-qiang, et al. Preparation and mechanical properties of cellulose nanowhisker/nitrocellulose nanocomposites[J]. Acta Armamentarii, 2012, 33(10): 1174-1177.(in Chinese)
[12］ Saito T, Nishiyama Y, Putaux J L, et al. Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose[J]. Biomacromolecules, 2006, 7(6):1687-1691.
[13］王文俊, 邵自强, 张凤侠, 等．以纳米纤维素晶须悬浮液为原料制备纳米硝化棉[J]．火炸药学报, 2011, 34(2): 73-76．
WANG Wen-jun, SHAO Zi-qiang, ZHANG Feng-xia, et al. Preparation of nano cellulosenitrate based on cellulose nano-whisker[J]. Chinese Journal of Explosives & Propellants, 2011, 34(2):73-76.(in Chinese)
[14］杨瑞成, 羊海棠, 彭采宇. 逾渗理论及聚合物脆韧转变逾渗模型[J]. 兰州理工大学学报, 2005, 31(1): 26-30.
YANG Rui-cheng, YANG Hai-tang, PENG Cai-yu. Percolation theory and percolation modle of brittle-ductiletransition of polymers[J]. Journal of Lanzhou University of Technology, 2005, 31(1): 26-30.(in Chinese)
[15］齐共金, 张长瑞, 曹英斌.逾渗模型在计算材料学中的研究进展[J]. 材料科学与工程学报, 2004, 22(1): 123-127.
QI Gong-jin, ZHANG Chang-rui, CAO Ying-bin. Research progress of percolation modle in computational materials science[J]. Journal of Materials Science & Engineering, 2004, 22(1):123-127. (in Chinese)

[1]	刘强，陈鹏万，苏健军，李芝绒，张玉磊. 碳化硅与聚脲纳米复合材料拉伸力学性能和本构模型[J]. 兵工学报, 2021, 42(6): 1238-1249.
[2]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[3]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[4]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[5]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[6]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[7]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[8]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[9]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[10]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[11]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[12]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[13]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[14]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.
[15]	张亚舟，李贞晓，程年恺，田慧，栗保明. 一种真空触发开关脉冲电源系统研究[J]. 兵工学报, 2017, 38(8): 1469-1475.

纳米纤维素纤维的表面改性及其对硝化纤维素膜力学性能的影响

Surface Modification of Cellulose Nano-fiber and Its Effect on Mechanical Properties of Nitrocellulose Film

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价