[1] Bender D, Fong R, Ng W, et al. Dual mode warhead technology for future smart munitions[C]∥ Proceedings of the 19th International Symposium of Ballistics. Interlaken, Switzerland: IBC, 2001. [2] 汪得功, 李文彬, 王晓鸣, 等. 单锥罩成型装药环起爆对侵彻体形成的影响研究[J]. 兵工学报, 2009, 30(8): 1014-1018. WANG De-gong, LI Wen-bin, WANG Xiao-ming, et al. Research on the influence of annular initiation on penetrator formation of shaped charge conical liners[J]. Acta Armamentarii, 2009, 30(8): 1014-1018. (in Chinese) [3] 李伟兵, 王晓鸣, 李文彬, 等. 药型罩结构参数对多模毁伤元形成的影响[J]. 弹道学报, 2009, 21(1): 19-23. LI Wei-bing, WANG Xiao-ming, LI Wen-bin, et al. Effect of liner configuration parameter on formation of mulimode penetrator[J]. Journal of Ballistics, 2009, 21(1): 19-23. (in Chinese) [4] 蒋建伟, 帅俊峰, 李娜, 等. 多模毁伤元形成与侵彻效应的数值模拟[J]. 北京理工大学学报, 2008, 28(9): 756-758,805. JIANG Jian-wei, SHUAI Jun-feng, LI Na, et al. Numerical simulation of the formation of multimode EFP and its penetration effect to RHA[J]. Transactions of Beijing Institute of Technology, 2008, 28(9): 756-758,805. (in Chinese) [5] 隋树元, 王树山. 终点效应学[M]. 北京: 国防工业出版社, 2000. SUI Shu-yuan, WANG Shu-shan. Terminal effects theory[M]. Beijing: National Defense Industry Press, 2000. (in Chinese) [6] 张宝平, 张庆明, 黄风雷, 等. 爆轰物理学[M]. 北京: 兵器工业出版社, 2006. ZHANG Bao-ping, ZHANG Qing-ming, HUANG Feng-lei, et al. Detonation physics[M]. Beijing: The Publishing House of Ordnance Industry, 2006. (in Chinese) [7] Li W B, Wang X M, Li W B. The effect of annular multi-point initiation on the formation and penetration of an explosively formed penetrator[J]. International Journal of Impact Engineering, 2010, 37(4): 414-424. [8] Fu J P, Chen Z G, Hou X C, et al. Simulation and experimental investigation of jetting penetrator charge at large stand-off distance[J]. Defence Technology, 2013,9(2):117-124. [9] 樊菲. 实现杆流与射流转换的研究[D]. 南京:南京理工大学,2012. FAN Fei. Research on achieving the conversion of JPC and JET[D]. Nanjing: Nanjing University of Science and Technology, 2012. (in Chinese) |