[1] 王忠雷,赵国群.精密锻造技术的研究现状及发展趋势[J]. 精密成形工程,2009, 1(1):32-38,83. WANG Z L, ZHAO G Q. Research status and development trend of precision forging technology[J]. Precision Forming Engineering, 2009, 1(1): 32-38,83.(in Chinese) [2] 田文松,罗荣,代安源.枪管径向冷精锻成形技术的应用研究[J].精密成形工程,2009,1(3):58-62. TIAN W S, LUO R, DAI A Y. Application research of radial cold precision forging forming technology of barrel[J]. Precision Forming Engineering, 2009, 1(3): 58-62.(in Chinese) [3] LAHOTI G D, ALTAN T. Analysis of the radial forging process for manufacturing rods and tubes[J]. Journal of Engineering for Industry, 1976, 98(1):265. [4] CHEN J, CHANDRASHEKHARA K, RICHARDS V L. Three-dimensional nonlinear finite element analysis of hot radial forging process for large diameter tubes[J]. Materials and Manufacturing Processes, 2010,25(7): 669-678. [5] 张雪, 樊黎霞, 张鹤词. 身管线膛精密径向锻造的锻透性分析[J]. 兵工学报, 2019,40(3):473-480. ZHANG X, FAN L X, ZHANG H C. Analysis of forging penetration of barrel rifling in precision radial forging process[J].Acta Armamentarii, 2019,40(3):473-480.(in Chinese) [6] 樊黎霞,赵轲,董雪花.身管径向精密锻造的塑性应变分析与锻造比研究[J]. 精密成形工程,2014, 6(1):1-8. FAN L X, ZHAO K, DONG X H. Study on plastic strain analysis and forging ratio of radial precision forging of body tube[J]. Precision Forming Engineering, 2014, 6(1):1-8. (in Chinese) [7] 樊黎霞,刘力力,刘庆东,等.身管线膛精锻加工过程的数值分析[J].兵工学报,2009,30(8):1098-1102. FAN L X, LIU L L, LIU Q D, et al. Numerical analysis of the process of precision forging in pipelines[J]. Acta Armamentarii, 2009,30(8): 1098-1102. (in Chinese) [8] 樊黎霞,王贺,王志刚.身管膛线精锻成形金属流动与变形分析[J].精密成形工程,2013,5(1):20-24. FAN L X, WANG H, WANG Z G. Metal flow and deformation analysis of body forging line precision forging[J]. Precision Forming Engineering, 2013,5(1): 20-24. (in Chinese) [9] ABE H, FURUGEN M. Method of evaluating workability in cold pilgering[J]. Journal of Materials Processing Technology, 2012, 212(8):1687-1693.
[10] ABE H, FURUGEN M. Method of evaluating workability in cold pilgering of zirconium alloy tube[J]. Materials Transactions, 2010, 51(7):1200-1205. [11] 朱康平,杨亚社,席锦会. Q值及变形量对中强钛合金冷轧管材表面质量的影响[J]. 钛工业进展,2012, 29(4):31-34. ZHU K P, YANG Y S, XI J H. Effect of Q value and deformation on surface quality of medium strength titanium alloy cold rolled tube[J]. Titanium Industry Progress, 2012, 29(4): 31-34. (in Chinese) [12] 陈胜川,朱宝辉,袁红军,等. Q值对Gr.9钛合金冷轧管材组织及性能的影响[J]. 钛工业进展,2016, 33(5):25-29. CHEN S C, ZHU B H, YUAN H J, et al. Effect of Q value on microstructure and properties of Gr.9 titanium alloy cold rolled tube[J]. Titanium Industry Progress, 2016, 33(5): 25-29. (in Chinese) [13] DUNSTAN P G, JOHNSON R T. Factors influencing I.D. crack propagation in tube pilgering[C]∥Proceedings of Conference on Sources & Prevention Defects in Tubes, Bars Shapes. AZ,US:[s.n.],1988:48-56. [14] MONTMITONNET P, LOG R, HAMERY M, et al. 3D elastic-plastic finite element simulation of cold pilgering of zircaloy tubes[J]. Journal of Materials Processing Technology, 2002, 125/126: 814-820. [15] CHAN W L, FU M W, LU J, et al. Simulation-enabled study of folding defect formation and avoidance in axisymmetrical flanged components[J]. Journal of Materials Processing Technology, 2009, 209(11):5077-5086.
第41卷第5期2020 年5月 兵工学报ACTA ARMAMENTARII Vol.41No.5May2020
|