[1] 赵轲.身管径向锻造过程的塑性应变分析与晶体塑性有限元模拟[D]. 南京:南京理工大学,2014. ZHAO K. Plastic strain analysis and crystal plastic finite element simulation of radial forging process of body tube [D]. Nanjing:Nanjing University of Science and Technology, 2014.(in Chinese) [2] 夏华,胡亚民,袁亮.径向锻造的工艺原理和径向锻造机的应用[C]∥首届锻压设备与制造技术论坛暨全国锻压设备委八届一次 学术会议论文集.重庆:重庆理工大学,2004:37-39. XIA H, HU Y M, YUAN L. Process principle of radial forging and application of radial forging machine [C]∥Proceedings of the 1st Forging Equipment and Manufacturing Technology Forum and the Proceedings of the 8th Academic Conference of the National Forging Equipment Committee. Chongqing: Chongqing University of Technology, 2004: 37-39.(in Chinese) [3] 陈玉雯,黄玲,樊黎霞.弹膛精密径向锻造锻透性研究[J].精密成形工程,2018,10(6):69-77. CHEN Y W,HUANG L,FAN L X. Penetration efficiency in precision radial forging penetration of chamber [J]. Journal of Netshape Forming Engineering,2018,10(6):69-77.(in Chinese) [4] 陈玉雯.身管弹线膛同锻弹膛成形研究及锤头芯棒匹配设计[D]. 南京:南京理工大学,2018:53-55. CHEN Y W. Research on the formation of the barrel and the forged magazine and the matching design of the hammer head [D]. Nanjing:Nanjing University of Science and Technology, 2018:53-55.(in Chinese) [5] 栾谦聪,董湘怀,吴云剑.径向锻造工艺参数对锻透性的影响[J]. 中国机械工程,2014,25(22):3098-3103. LUAN Q C, DONG X H, WU Y J. Effect ofradial forging process parameters on forgeability[J].China Mechanical Engineering, 2014, 25(22): 3098-3103.(in Chinese) [6] 樊黎霞,刘力力,刘庆东,等.身管线膛精锻加工过程的数值分析[J].兵工学报,2009,30(8):1098-1102. FAN L X,LIU L L,LIU Q D,et al.Numerical analysis of the process of precision forging in pipeline[J].Acta Armamentarii,2009,30(8):1098-1102.(in Chinese) [7] 樊黎霞,赵柯,董雪花.身管径向精密精锻的塑性应变分析与锻造比研究[J].精密成形工程,2014,6(1):1-8. FAN L X,ZHAO K,DONG X H.Study on plastic strain analysis and forging ratio of radial precision forging of body tube[J]. Precision Forming Engineering,2014,6(1):1-8. (in Chinese) [8] 樊黎霞,王贺,王志刚.身管膛线精锻成形金属流动与变形分析[J]. 精密成形工程,2013,5(1):20-24. FAN L X,WANG H,WANG Z G.Analysis of metal flow in radial forging process for barrel rifling[J].Journal of Netshape Forming Engineering,2013,5(1):20-24.(in Chinese) [9] 张雪,樊黎霞,张鹤词.身管线膛精密径向锻造的锻透性分析[J]. 兵工学报,2019,40(3):473-479. ZHANG X,FAN L X,ZHANG H C.Analysis of forging permeability of precision radial forging of body pipe line[J]. Acta Armamentarii,2019,40(3):473-479.(in Chinese) [10] AMELI A,MOVAHHEDY M R. Aparametric study on residual stresses and forging load in cold radial forging process[J].The International Journal of Advanced Manufacturing Technology, 2007,33:7-17. [11] GHAEI A,MOVAHHEDY M R,KARIMI T A. Study of the effects of die geometry on deformatioon in the radial forging process[J].Journal of Materials Processing Technology, 2005,170(1/2):156-163. [12] GHAEI A,KARIMI T A,MOVAHHEDY M R.A new upper bound solution for analysis of the radial forging process[J]. International Journal of Mechanical Sciences, 2006,48(1):1264-1272. [13] SANJARI M, SAIDI P, TAHERI A K, et al.Determination of strain field and heterogeneity in radial forging of tube using finite element method and microhardness test[J]. Materials and Design,2012,38:147-153. [14] SANJARI M,MOVAHEDI M R,KARIMI A. An optimization method for radial forging process using ANN and Taguchi method[J].The International Journal of Advanced Manufacturing Technology,2009,40(7):776-784. [15] DOMBLESKY J P,SHIVPURI R,PAINTER B. Application of the finite elment method to the radial forging of large diameter tubes[J].Journal of Materials Processing Technology,1995,49(1): 57-74.
第41卷第3期2020 年3月 兵工学报ACTA ARMAMENTARII Vol.41No.3Mar.2020
|