欢迎访问《兵工学报》官方网站,今天是 分享到:

兵工学报 ›› 2017, Vol. 38 ›› Issue (7): 1307-1313.doi: 10.3969/j.issn.1000-1093.2017.07.008

• 论文 • 上一篇    下一篇

弹丸批质量水平的密集度检验方法

缪云飞1, 徐榕2, 王国平1, 陈东阳1, 贠来峰3, 战志波3   

  1. (1.南京理工大学 能源与动力工程学院, 江苏 南京 210094; 2.陆军重庆军事代表局, 重庆 400000;3.陆军南京军事代表局, 江苏 南京 250031)
  • 收稿日期:2016-12-03 修回日期:2016-12-03 上线日期:2018-04-12
  • 通讯作者: 王国平(1976—),男,教授,博士生导师 E-mail:wgp1976@163.com
  • 作者简介:缪云飞(1992—),男,博士研究生。E-mail: myf_njust@163.com
  • 基金资助:
    武器装备预先研究项目(ZLA13176); 国家自然科学基金项目(11472135)

Test Method for the Intensity of Lot Quality Level of Projectiles

MIAO Yun-fei1, XU Rong2, WANG Guo-ping1, CHEN Dong-yang1, YUN Lai-feng3, ZHAN Zhi-bo3   

  1. (1.School of Energy and Power Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China; 2.Army Chongqing Military Representative Bureau, Chongqing 400000, China; 3.Army Nanjing Military Representative Bureau, Nanjing 250031, Jiangsu, China)
  • Received:2016-12-03 Revised:2016-12-03 Online:2018-04-12

摘要: 弹丸批质量水平的密集度检验方法是考核弹丸批生产质量的重要手段。为了探索新型弹丸批质量水平的密集度检验方法,基于计算流体力学软件和经验公式的弹丸空气动力学参数快速仿真计算方法,分析弹丸的结构误差对气动参数的影响,建立了弹丸气动参数数据库。以Visual Basic为 平台,建立了考虑质量偏心、动不平衡、射角、质量、弹道风等因素的弹丸数学模型,开发了火炮弹丸密集度仿真软件并进行验证。基于仿真软件,进行了随机因素与密集度的相关性分析,得到弹质量、弹径、质量偏心、动不平衡、初始摆动角、初始摆动角速度和初速对高低密集度和方位密集度影响程度的大小顺序,给出了弹丸批质量水平密集度检验方法的流程及应用。研究结果表明,该密集度检验方法在弹丸批质量水平的考核中是可行的。

关键词: 兵器科学与技术, 弹丸, 气动参数, 结构误差, 密集度

Abstract: The test method of the intensity of projectiles in batches is an important measure of assessing the quality level of projectiles. In order to seek a new test method, the influences of the structural errors of projectiles on the aerodynamic parameters are analyzed using a fast simulation calculation method based on the technology, combing the computational fluid dynamics (CFD) software and the empirical formula for calculating the aerodynamic parameters of projectiles. The database of aerodynamic parameters of projectiles is established. A simulation software based on the six degree-of-freedom model and the Visual Basic is programmed and validated for calculating the intensity of projectiles in batches. The order of influences of the mass, diameter, mass eccentricity, dynamic unbalance, initial swing angle, initial swing angular velocity and muzzle velocity on the intensity is achieved by analyzing the correlation between random factor and intensity. The process and application of the test method are proposed. The research results show that the proposed test method is available for the assessment of the quality level of projectiles in batches. Key

Key words: ordnancescienceandtechnology, projectile, aerodynamicparameter, structureerror, intensity

中图分类号: