基于水平集方法和最小距离函数法的复杂装药燃面退移问题研究

doi:10.3969/j.issn.1000-1093.2017.02.011

摘要/Abstract

摘要： 利用水平集(Level-set)方法和最小距离函数(MDF)方法，对固体火箭发动机装药燃面退移问题进行研究。基于Level-set方法和MDF方法的相互耦合，建立了一种可以准确预测固体推进剂装药燃烧表面退移的方法；对不同几何药型、不同燃速组合推进剂装药及带侵蚀效应的装药进行计算分析，其结果表明，该组合方法及所采用的网格界面分割和几何重构计算燃面面积的思想，在预测固体推进剂装药燃面瞬态退移问题上具有良好的适应性和较高的可信度。

关键词: 兵器科学与技术, 装药燃面退移, 燃面面积, 水平集方法, 最小距离函数方法

Abstract: The combustion surface regression is studied using Level-set method and minimum distance function (MDF) in SRM. A way that accurately predicts burning surface regression of solid propellant is established based on Level-set method and MDF. The grains with different geometries, the propellant grains with different burning rates and the grains with erosion combustion are calculated and analyzed. The results show that the combined method which calculates the burning area based on interface segmentation and geometric reconstruction has a good adaptability and high reliability on combustion surface regression. Key

Key words: ordnancescienceandtechnology, combustionsurfaceregression, combustionsurfacearea, level-setmethod, MDFmethod

中图分类号:

V435⁺.12

王革，韩万之，李冬冬，郜冶. 基于水平集方法和最小距离函数法的复杂装药燃面退移问题研究[J]. 兵工学报, 2017, 38(2): 280-291.

WANG Ge, HAN Wan-zhi, LI Dong-dong, GAO Ye. Research on Grain Burning Surface Regression Based on Level-set Method and Minimum Distance Function[J]. Acta Armamentarii, 2017, 38(2): 280-291.

参考文献

［1］ Peterson E G, Nielsen G C. Generalized coordinate grain design and internal ballistics evaluation program［C］∥Solid Propulsion Conference. Atlantic City, US: AIAA,2013:68-490.
［2］ Coats D E, Levine J N, Nickerson G R. A computer program for the prediction of solid propellant rocket motor performance ［R］. California: Ultra Systems Inc,1975.
［3］侯晓,蹇泽群.三维药柱燃面的通用积分计算法［J］. 固体火箭技术,1993,9(3):1-6.
HOU Xiao, JIAN Ze-qun. General integration calculation for burning surface of three dimensional grain［J］. Journal of Solid Rocket Technology, 1993, 9(3):1-6. (in Chinese)
［4］周华盛.药柱通用坐标计算法计算结果跳动的原因分析及解决途径［J］. 固体火箭技术,1994,9(3):8-16.
ZHOU Hua-sheng. Analysis and solution approach about pulsation cause of calculation results of the general coordinate calculation method of the grain［J］. Journal of Solid Rocket Technology, 1994,9(3):8-16. (in Chinese)
［5］鲍福廷,李逢春.固体发动机装药CAD［J］.固体火箭技术,1994,9(3):1-7.
BAO Fu-ting, LI Feng-chun. Computer aided design of propellant grains for solid rocket motors［J］. Journal of Solid Rocket Technology, 1994, 9(3):1-7. (in Chinese)
［6］田维平,王锟.固体发动机药柱CAD及燃烧模拟分析［J］. 固体火箭技术,1993,12(3):14-22.
TIAN Wei-ping, WANG Kun. Computer aided design and burning simulation analysis of solid rocket motor grains［J］. Journal of Solid Rocket Technology, 1993,12(3):14-22. (in Chinese)
［7］方蜀州,胡克娴.固体火箭发动机三维药柱燃面退移仿真技术及燃面通用计算方［J］. 固体火箭技术, 1993,12(4):10-20.
FANG Shu-zhou, HU Ke-xian. The general technique of emulation and calculating of burning surface of 3D grain of solid rocket motors［J］. Journal of Solid Rocket Technology, 1993,12(4):10-20. (in Chinese)
［8］颜仙荣,于胜春，王庆官.实体造型技术与固体发动机装药燃面计算［J］.固体火箭技术,2003,26(2):20-22.
YAN Xian-rong, YU Sheng-chun, WANG Qing-guan. The solid modeling technology and the grain-burning-area calculation［J］. Journal of Solid Rocket Technology, 2003, 26(2): 20-22. (in Chinese)
［9］刘伟.基于Pro/E和Qt平台的固体火箭发动机内弹道性能计算［D］.哈尔滨：哈尔滨工程大学, 2014.
LIU Wei. Performance computing of solid propellant rocket motor［D］. Harbin: Harbin Engineering University,2014. (in Chinese)

［10］ Voller V R, Brent A D. The modeling of heat, mass and solute transport in solidification systems［J］. International Journal of Heat and Mass Transfer, 1989, 32(9) : 1719-1731.
［11］ Breton P L, Ribéreau D, Godfroy F. SRM performance analysis by coupling bidimensional surface burnback and pressure field computations［C］∥34th AIAA JPC Conference. Cleveland, US:AIAA, 1998.
［12］ Gueyffier D, Roux F X. High-order computation of burning propellant surface and simulation of fluid flow in solid rocket chamber［C］∥50th AIAA/ASME/SAE/ASEE Joint Propulsion Conference.Cleveland, US: AIAA, 2014.
［13］沈伟,邢耀国.基于非结构网格的燃面推进算法［J］. 固体火箭技术, 2005, 28 (3):176-179.
SHEN Wei, XING Yao-guo. A simulation method of burning surface regression based on unstructured mesh［J］. Journal of Solid Rocket Technology, 2005, 28 (3):176-179. (in Chinese)
［14］ Jiao X M. Face offsetting: a unified approach for explicit moving interfaces［J］. Journal of Computational Physics, 2007, 220(2): 612-625.
［15］贺征,郜冶.动态网格在固体火箭发动机内流场计算中的应用研究［J］.弹箭与制导技术, 2008,28(1):164-166.
HE Zheng, GAO Ye. The study of dynamic grids application to calculate the inner flow field of solid rocket motor［J］. Journal of Projectiles, Rockets, Missiles and Guidance, 2008, 28(1):164-166. (in Chinese)
［16］ Li Q, He G Q. Coupled simulation of fluid flow and propellant burning surface regression in a solid rocket motor［J］. Computers & Fluids, 2014, 93(8):146-152.
［17］ Sethian J A. Theory, algorithms, and applications of level set methods for propagating interfaces［J］. Acta Numerica, 1996, 5(5): 309-395.
［18］ Hegab A, Jackson T L, Buckmaster J, et al. Nonsteady burning of periodic sandwich propellants with complete coupling between the solid and gas phases［J］. Combustion and Flame, 2001, 125(1): 1055-1070.
［19］秦飞.固体火箭发动机复杂装药燃面算法研究［D］. 西安：西北工业大学,2003.
QIN Fei. Method research for burning surface calculation of solid rocket motor with complicated grain［D］. Xi'an: Northwestern Polytechnical University, 2003. (in Chinese)

［20］ Yildirim C, Aksel M H. Numerical simulation of the grain burnback in solid propellant rocket motor［C］∥41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Arizona, US: AIAA,2005:3995-4160.
［21］ Cavallini E, Favini B, Di Giacinto M, et al. Internal ballistics simulation of a NAWC tactical SRM［J］. Journal of Applied Mechanics, 2011, 78(5): 748-760.
［22］ Wang D H,Yang F, Fan H, et al. An integrated framework for solid rocket motor grain design optimization［J］. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2014, 228(7): 1156-1170.
［23］ Yao H H, Chiang C H. Tracking methods to study the surface regression of the solid-propellant grain［J］. International Journal of Engineering and Technology Innovation, 2014, 4(4):213-222.
［24］何涛,孙振华.星型装药固体火箭发动机工作过程仿真研究［J］.航空兵器,2015(1):61-64.
HE Tao, SUN Zhen-hua. Numerical simulation of the working process in star grain solid rocket motor［J］. Aero Weaponry, 2015(1):61-64. (in Chinese)

［25］ Michael A Willcox. Solid rocket motor internal ballistics simulation using three-dimensional grain burnback［J］. Journal of Propulsion and Power, 2007, 23(3):575-584.
［26］马长礼.固体火箭发动机MDF燃面计算方法研究［D］.长沙：国防科学技术大学, 2007.
MA Chang-li. Research of MDF burning surface CaleUlation method for solid rocket motor［D］.Changsha : National University of Defense Technology, 2007. (in Chinese)

［27］熊文波,刘宇. 基于单元法的三维装药通用燃面计算［J］. 航空学报, 2009, 30(7):1176-1180.
XIONG Wen-bo, LIU Yu. Generalized burning surface calculation of three dimensional propellant based on element method［J］. Acta Aeronautica et Astronautica Sinica, 2009, 30(7):1176-1180. (in Chinese)
［28］林小树, 王宝山. 双燃速固体火箭发动机内弹道计算方法［J］. 固体火箭技术, 1991 (4): 12-18.
LIN Xiao-shu, WANG Bao-shan. Calculation method of solid rocket motor internal ballistic with dual burning rate［J］. Journal of Solid Rocket Technology, 1991(4):12-18. (in Chinese)

第38卷
第2期2017 年2月兵工学报ACTA
ARMAMENTARIIVol.38No.2Feb.2017

[1]	周伯俊, 于传强，刘志浩，柯冰. 基于高压储能的特种车辆快速起竖技术与验证[J]. 兵工学报, 2022, 43(7): 1488-1497.
[2]	高月光，冯顺山，刘云辉，黄岐. 不同端盖厚度的圆柱形装药壳体破片初速分布[J]. 兵工学报, 2022, 43(7): 1527-1536.
[3]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[4]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[5]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[6]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[7]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[8]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[9]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[10]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[11]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[12]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[13]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[14]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[15]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.