永磁同步电机控制系统带过调制的弱磁控制策略研究

doi:10.3969/j.issn.1000-1093.2016.05.025

兵工学报 ›› 2016, Vol. 37 ›› Issue (5): 953-960.doi: 10.3969/j.issn.1000-1093.2016.05.025

• 研究简报 • 上一篇

永磁同步电机控制系统带过调制的弱磁控制策略研究

涂群章¹，林加堃¹，曾繁琦²，邹世超³，陆影¹

(1.解放军理工大学野战工程学院, 江苏南京 210007; 2.军事交通学院军用车辆系, 天津 300161;3.海拉（厦门）电气有限责任公司, 福建厦门 361100)

收稿日期:2015-10-19 修回日期:2015-10-19 上线日期:2016-07-06
通讯作者: 林加堃 E-mail:561104904@qq.com
作者简介:涂群章（1969—），男，教授，博士生导师
基金资助:
总装备部“十二五”重点研究项目（2014年）

Research on Flux-weakening Control Strategy with Overmodulation of PMSM Control System

TU Qun-zhang¹， LIN Jia-kun¹， ZENG Fan-qi²， ZOU Shi-chao³， LU Ying¹

(1.College of Field Engineering, PLA University of Science and Technology, Nanjing 210007, Jiangsu, China;2.Military Vehicle Department, Military Transportation University, Tianjin 300161, China;3.Hella (Xiamen) Electronic Device Co., Ltd., Xiamen 361100, Fujian, China)

Received:2015-10-19 Revised:2015-10-19 Online:2016-07-06
Contact: LIN Jia-kun E-mail:561104904@qq.com

摘要/Abstract

摘要： 永磁同步电机控制系统在实际应用中，复杂多变的工况对电机的响应需求是不同的。为了拓宽电机控制系统的调速范围，且满足系统对转矩响应能力和大转矩输出特性的要求，在弱磁控制策略的基础上引入过调制方法，将其应用于永磁同步电机控制系统，并进行仿真和实验研究。结果表明，相比于无过调制的弱磁控制策略，带过调制的弱磁控制策略能使系统在调速过程中充分利用直流母线电压，从而提高了转矩响应和大转矩输出能力，缩短了转速响应时间，同时电机的工作效率符合应用要求。

关键词: 兵器科学与技术, 永磁同步电机, 控制系统, 弱磁控制, 过调制

Abstract: To broaden the speed range of motor control system and meet the requirements of system for strong torque response capability and the large torque output characteristics, an overmodulation method is applied to PMSM control system based on the flux-weakening control strategy. The demand of the motor response is different in the complex and changeable operating condition. Simulations and experiments are carried out. The simulations and experimental results are analyzed. Compared to the flux-weakening control strategy without overmodulation, it is found that the introduction of overmodulation method can make the system take full advantage of DC bus voltage. The torque response and large torque output are improved, and the speed response time is reduced by using the proposed method. At the same time, the working efficiency of motor is in accordance with the application requirements.

Key words: ordnance science and technology, permanent magnet synchronous motor, control system, flux-weakening control, overmodulation

中图分类号:

TM301.2

涂群章，林加堃，曾繁琦，邹世超，陆影. 永磁同步电机控制系统带过调制的弱磁控制策略研究[J]. 兵工学报, 2016, 37(5): 953-960.

TU Qun-zhang， LIN Jia-kun， ZENG Fan-qi， ZOU Shi-chao， LU Ying. Research on Flux-weakening Control Strategy with Overmodulation of PMSM Control System[J]. Acta Armamentarii, 2016, 37(5): 953-960.

参考文献

［1］张德恩,邹少军.军用推土机的发展分析[J].工兵装备研究, 2013, 25(4): 6-10.
ZHANG De-en, ZOU Shao-jun. Developmental analysis of military bulldozer [J]. Engineer Equipment Research, 2013, 25(4): 6-10. (in Chinese)
[2］ Bae B H, Patel N, Schulz S, et al. New field weakening technique for high saliency interior permanent magnet motor [C]∥Proceedings of IEEE Conference on Industry Applications. Salt Lake City, US: IEEE, 2003: 898-905.
[3］ Lee D C, Lee G M. A novel over-modulation technique for space-vector PWM inverters [J]. IEEE Transactions on Power Electron, 1998, 13(6): 1144-1151.
[4］ Kerkman R J, Seibel B J, Bord D M, et al. A simplified inverter model for on-line control and simulation [J]. IEEE Transactions on Industry Applications, 1991, 27(3): 567-573.
[5］ Kerkman R J, Leggate D, Seibel B J, et al. Operation of PWM voltage source-inverters in the overmodulation region [J]. IEEE Transactions on Industry Electron, 1996, 43(1): 132-141.
[6] Holtz J, Lotzkat W, Khambadkone A M. On continuous control of PWM inverters in the overmodulation range including the six-tep mode [J]. IEEE Transactions on Power Electron, 1993, 8(4): 546-553.
[7] Bolognani S, Zigliotto M. Novel digital continuous control of SVM inverters in the overmodulation range [J].IEEE Transactions on Industry Applications, 1997, 33(2): 525-530.
[8］张艳芳,林飞,马志文.两种SVPWM过调制方法的比较研究[J].北京交通大学学报, 2005, 29(2): 39-43.
ZHANG Yan-fang, LIN Fei, MA Zhi-wen. Comparison of two space vector pulse-width over-modulation methods[J]. Journal of Beijing Jiaotong University, 2005, 29(2): 39-43. (in Chinese)
[9］吴芳,万山明,黄声华.一种过调制算法及其在永磁同步电动机弱磁控制的应用[J].电工技术学报, 2010, 25(1): 58-63.
WU Fang, WAN Shan-ming, HUANG Sheng-hua. An over-modulation algorithm and its application in PMSM drive with flux-weakening control [J]. Transactions of China Electrotechnical Society, 2010, 25(1): 58-63. (in Chinese)
[10］冯江华,桂卫华,许俊峰.考虑参数变化的永磁同步电动机弱磁控制研究[J].微电机, 2008, 41(4): 28-31.
FENG Jiang-hua, GUI Wei-hua, XU Jun-feng. Flux-weakening control research of permanent magnet synchronous machines considering parameters variation [J]. Micromotors, 2008, 41(4): 28-31. (in Chinese)
[11］张兴春.混合动力用内置式永磁同步电机转矩控制研究[D].北京:北京理工大学, 2012.
ZHANG Xing-chun. Research on torque control system of permanent magnet synchronous motor for hybrid power [D].Beijing: Beijing Institute of Technology, 2012. (in Chinese)
[12］梁振鸿,温旭辉.应用过调制技术扩展永磁同步电机运行区域[J].电工电能新技术, 2003, 22(1): 39-42.
LIANG Zhen-hong, WEN Xu-hui. Study on extending PMSM operation range by over-modulation strategy [J]. Advanced Technology of Electrical Engineering and Energy. 2003, 22(1): 39-42. (in Chinese)
[13］王晓明.电动机的DSP控制——TI公司DSP应用[M].第2版. 北京:北京航空航天大学出版社, 2009.
WANG Xiao-ming. DSP control of the motor—DSP application of TI [M]. 2nd ed. Beijing: Beihang University Press, 2009. (in Chinese)
[14] 李长红,陈明俊,吴小役. PMSM调速系统中最大转矩电流比控制方法的研究[J].中国电机工程学报, 2005, 25(11): 169-174.
LI Chang-hong, CHEN Ming-jun, WU Xiao-yi. Study of a maximum ratio of torque to current control method for PMSM[J]. Proceedings of the CSEE, 2005, 25(11): 169-174. (in Chinese)
[15］张兴春,张幽彤,黄文卿.车用内置式永磁同步电机过调制弱磁算法[J].北京理工大学学报, 2013, 33(9): 925-928.
ZHANG Xing-chun, ZHANG You-tong, HUANG Wen-qing. Research on over-modulation flux-weakening strategy of IPMSM in HEV application[J]. Transactions of Beijing Institute of Technology, 2013, 33(9): 925-928. (in Chinese)
[16］洪乃刚.电力电子、电机控制系统的建模和仿真[M].北京:机械工业出版社, 2010.
HONG Nai-gang. Modeling and simulation of power electronics and motor control system [M]. Beijing: China Machine Press,2010. (in Chinese)
[17］孙逢春,陈树勇.履带车辆感应电动机驱动系统匹配理论[J].机械工程学报, 2008, 44(11): 260-266.
SUN Feng-chun, CHEN Shu-yong. Matching theory of tracked vehicle induction motor drive system [J]. Journal of Mechanical Engineering, 2008, 44(11): 260-266. (in Chinese)
[18］张晓辰,涂群章,潘明.电传动履带式推土机再生制动控制策略的优化与仿真[J].工程机械, 2015, 46(2): 37-43.
ZHANG Xiao-chen, TU Qun-zhang, PAN Ming. Optimization and simulation of regenerative braking control strategy for electric drive tracked bulldozer[J]. Construction Machinery and Equipment, 2015, 46(2): 37-43. (in Chinese)

[1]	王武，付小强，卢青山，薛鹏，岳小东. 某型火箭炮运弹车自动调平控制系统的设计与实现[J]. 兵工学报, 2022, 43(S1): 82-87.
[2]	李景奎，林文杰，江秀红，卢雨泽. 基于GO-Markov的飞机燃油闭环控制系统可靠性分析[J]. 兵工学报, 2022, 43(6): 1447-1455.
[3]	刘月, 刘铁林, 姜相争, 韩月明. 基于径向基函数和自组织映射的导弹控制系统健康状态评估[J]. 兵工学报, 2022, 43(4): 931-939.
[4]	江秀红，李佳欣，刘彦娟，王玉颖. 含反馈环的电动飞机驱动系统可靠性分析方法[J]. 兵工学报, 2022, 43(2): 451-457.
[5]	孙一博，孟秀云. 滑翔飞行器多投放条件下飞行性能优化[J]. 兵工学报, 2021, 42(4): 781-797.
[6]	孟柳, 章回炫, 范涛. 永磁同步电机静止参数辨识及电流环控制器自动参数整定[J]. 兵工学报, 2021, 42(10): 2114-2122.
[7]	孙承旭, 李琦, 范涛, 温旭辉, 李晔, 王艳艳, 谭平. 车用双层内嵌式永磁同步电机转矩脉动抑制方法[J]. 兵工学报, 2021, 42(10): 2251-2259.
[8]	井安言，佘湖清. 基于神经网络观测器的水下拖体输出反馈姿态控制[J]. 兵工学报, 2020, 41(12): 2504-2513.
[9]	黄伟，徐建城，吴华兴，李俊兵. 基于非数据通信的导弹编队制导律算法[J]. 兵工学报, 2018, 39(5): 910-918.
[10]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[11]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[12]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[13]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[14]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[15]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.

永磁同步电机控制系统带过调制的弱磁控制策略研究

Research on Flux-weakening Control Strategy with Overmodulation of PMSM Control System

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价