基于粗糙集-逼近理想解排序的辐射源威胁排序方法

doi:10.3969/j.issn.1000-1093.2016.05.024

兵工学报 ›› 2016, Vol. 37 ›› Issue (5): 945-952.doi: 10.3969/j.issn.1000-1093.2016.05.024

基于粗糙集-逼近理想解排序的辐射源威胁排序方法

杨远志¹，王红卫^1,2，索中英³，陈游¹，范翔宇¹

(1.空军工程大学航空航天工程学院, 陕西西安 710038; 2.西北工业大学电子信息学院，陕西西安 710072;3.空军工程大学理学院, 陕西西安 710051)

收稿日期:2015-09-07 修回日期:2015-09-07 上线日期:2016-07-06
通讯作者: 杨远志 E-mail:yyzyangyuanzhi@163.com
作者简介:杨远志(1991—)，男，硕士研究生
基金资助:
航空科学基金项目（20145596025、20152096019）

An Emitter Threat Evaluation Method Based on Rough Set and TOPSIS

YANG Yuan-zhi¹， WANG Hong-wei^1,2， SUO Zhong-ying³， CHEN You¹， FAN Xiang-yu¹

(1.Aeronautics and Astronautics Engineering College, Air Force Engineering University, Xi’an 710038, Shaanxi, China;2.School of Electronic and Information, Northwestern Polytechnical University, Xi’an 710072, Shaanxi, China;3.Science College, Air Force Engineering University, Xi’an 710051, Shaanxi, China)

Received:2015-09-07 Revised:2015-09-07 Online:2016-07-06
Contact: YANG Yuan-zhi E-mail:yyzyangyuanzhi@163.com

摘要/Abstract

摘要： 将辐射源威胁评估作为多属性决策问题，提出逼近理想解排序（TOPSIS）法与粗糙集（RS）理论相结合的算法，构建一套完备的辐射源威胁等级排序模型，解决在没有先验信息条件下实时定量衡量辐射源威胁程度。针对TOPSIS方法中构造标准化决策矩阵时数据赋权的主观局限，运用粗糙集理论计算评价指标与评判结果的粗糙依赖度，确定评价指标权重，规避主观赋权的片面性。仿真结果与原始数据相符，证明所提方法的有效性，进一步量化威胁程度，有助于更精细准确排序。该方法具有工程实用价值，可以运用于辐射源威胁评估。

关键词: 兵器科学与技术, 粗糙集, 逼近理想解排序法, 威胁等级, 属性权重, 属性约简

Abstract: The threat evaluation of emitters is regarded as a multi-attribute decision-making problem. A complete model for computing the threat metric values is established to realize the quantitative representation of the emitter threat degree, which is based on the rough set (RS) and technique for order preference by similarity to solution (TOPSIS), thus solving the problem of measuring emitter threat degree in real-time and quantitation without priori information. For the subjective limitation of structuring the standardized decision matrix in the process of determining the weights in TOPSIS, the RS theory is applied to compute the significance of evaluation indicators to obtain the weight coefficient, which is confirmed by calculating the rough dependability among evaluation indicators and evaluation results, avoiding the influence of subjective weight. The simulation result is consistent with the original data, which could prove the effectiveness of the proposed algorithm. In addition, the quantifiable threat function would contribute to assess and rank the threats more accurately. The results show that the proposed method has some practical value in engineering and could be used to evaluate the emitter threats.

Key words: ordnance science and technology, rough set, TOPSIS method, threat degree, attribute weight, attribute reduction

中图分类号:

TN97

杨远志，王红卫，索中英，陈游，范翔宇. 基于粗糙集-逼近理想解排序的辐射源威胁排序方法[J]. 兵工学报, 2016, 37(5): 945-952.

YANG Yuan-zhi， WANG Hong-wei， SUO Zhong-ying， CHEN You， FAN Xiang-yu. An Emitter Threat Evaluation Method Based on Rough Set and TOPSIS[J]. Acta Armamentarii, 2016, 37(5): 945-952.

参考文献

［1］姜宁，胡维礼，孙翱. 辐射源威胁等级判定的模糊多属性方法[J].兵工学报，2004，25(1):56-59.
JIANG Ning, HU Wei-li, SUN Ao. Fuzzy multiattribute method of emitter threatening grade evaluation[J]. Acta Armamentarii, 2004, 25(1):56-59.(in Chinese)
[2］黄大荣，郭安学，李云生，等. 基于专家知识属性重要度的集群目标威胁评估方法[J].兵工学报，2009，30(10):1357-1362.
HUANG Da-rong, GUO An-xue, LI Yun-sheng, et al. An object-group threat assessment method based on attribute significance of multi-field expert systems[J]. Acta Armamentarii, 2009, 30(10): 1357-1362.(in Chinese)
[3］张媛，刘文彪，张立民. 基于主客观综合赋权的CGF态势评估建模研究[J].系统工程与电子技术，2013，35(1):85-90.
ZHANG Yuan, LIU Wen-biao, ZHANG Li-min. Situation assessment modeling for CGF based on the subject and objective integrated weight[J]. Systems Engineering and Electronics, 2013, 35(1): 85-90.(in Chinese)
[4］ Chen J, Yu G H, Gao X G. Cooperative threat assessment of multi-aircrafts based on synthetic fuzzy cognitive map[J]. Journal of Shanghai Jiaotong University: Science, 2012, 17(2): 228-232.
[5］潘红华，王建明，朱森，等. 目标威胁判断的模糊模式识别模型[J].兵工学报，2004，25(5):576-580.
PAN Hong-hua, WANG Jian-ming, ZHU Sen, et al. A fuzzy pattern recognition model for the threat evaluation of targets[J]. Acta Armamentarii, 2004, 25(5):576-580.(in Chinese)
[6］ Xu Y J, Wang Y C, Miu X D. Multi-attribute decision making method for air target threat evaluation based on intuitionistic fuzzy sets[J]. Journal of Systems Engineering and Electronics, 2012, 23(6):891-897.
[7］陈洁钰，姚佩阳，王勃，等. 基于结构熵和IGSO-BP算法的动态威胁评估[J].系统工程与电子技术，2015，37(5): 1076-1083.
CHEN Jie-yu, YAO Pei-yang, WANG Bo, et al. Dynamic threat assessment based on structure entropy and IGSO-BP algorithm[J]. Journal of Systems Engineering and Electronics, 2015, 37(5): 1076-1083.(in Chinese)
[8］王改革，郭立红，段红，等. 基于萤火虫算法优化BP神经网络的目标威胁估计[J].吉林大学学报:工学报，2013，43(4):1064-1069.
WANG Gai-ge, GUO Li-hong, DUAN Hong, et al. Target threat assessment using glowworm swarm optimization and BP neural network [J].Journal of Jilin University:Engineering and Technology Edition, 2013, 43(4):1064-1069.(in Chinese)
[9］郭辉，徐浩军，刘凌. 基于回归型支持向量机的空战目标威胁评估[J].北京航空航天大学学报，2010，36(1):123-126.
GUO Hui, XU Hao-jun, LIU Ling. Target threat assessment of air combat based on support vector machines for regression[J]. Journal of Beijing University of Aeronautics and Astronautics, 2010, 36(1):123-126.(in Chinese)
[10］李姜，郭立红. 基于改进支持向量机的目标威胁估计[J].光学精密工程，2014，22(5):1354-1362.
LI Jiang, GUO Li-hong. Target threat assessment using improved SVM[J]. Optics and Precision Engineering, 2014, 22(5):1354-1362.(in Chinese)
[11］ Khalkhali A. Best compromising crashworthiness design of automotive S-rail using TOPSIS and modified NSGAII[J]. Journal of Central South University, 2015, 22(1):121-133.
[12］ Wu J, Sun J S, Zha Y, et al. Ranking approach of cross-efficiency based on improved TOPSIS technique[J]. Journal of Systems Engineering and Electronics, 2011, 22(4):604-609.
[13］ Feng Z Q, Liu C G, Huang H. Knowledge modeling based on interval-valued fuzzy rough set and similarity inference: prediction of welding distortion[J]. Journal of Zhejiang University: Science C (Computers & Electronics), 2014, 15(8):636-650.
[14］ Wang J, Peng J X, Liu O. Density-based rough set model for hesitant node clustering in overlapping community detection[J]. Journal of Systems Engineering and Electronics, 2014, 25(6):1089-1097.
[15］李俊，孟涛，张立新，等. 基于粗糙集规则提取的导弹武器质量性能评估方法研究[J].兵工学报，2013，34(12): 1529-1535.
LI Jun, MENG Tao, ZHANG Li-xin, et al. Research on evaluation method for quality and performance of missile weapon based on rough set rule extraction[J]. Acta Armamentarii, 2013, 34(12): 1529-1535.(in Chinese)
［16］ Hwang C L, Yoon K. Multiple attribute decision making: methods and applications［M］. NY, US: Springer-Verlag, 1981.
[17］索中英，程嗣怡，袁修久，等. 优势决策信息系统规则获取方法及应用[J].兵工学报，2015，36(3):539-545.
SUO Zhong-ying，CHENG Si-yi，YUAN Xiu-jiu, et al. Rule acquisition method and application of dominance decision-making information system[J]. Acta Armamentarii, 2015, 36(3):539-545. (in Chinese)
[18］张文修，仇国芳. 基于粗糙集的不确定决策[M]. 北京：清华大学出版社，2006．
ZHANG Wen-xiu,QIU Guo-fang. Uncertain decision making based on rough sets[M]. Beijing： Tsinghua University Press, 2006．(in Chinese)
[19］关欣，衣晓，孙迎丰，等. 变精度粗糙集模型及其在辐射源识别中的应用[J].清华大学学报：自然科学版，2007，47(1): 28-31.
GUAN Xin, YI Xiao, SUN Ying-feng, et al. Variable precision rough set model with applications to emitter recognition[J]. Journal of Tsinghua University：Science and Technology, 2007, 47(1): 28-31.(in Chinese)

[1]	倪龙强，张丽华，姚新涛，胡高歌，刘鹏辉. 一种基于粗糙集证据理论深度融合的局部冲突快速合成方法[J]. 兵工学报, 2019, 40(12): 2560-2569.
[2]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[3]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[4]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[5]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[6]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[7]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[8]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[9]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[10]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[11]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[12]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[13]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[14]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.
[15]	张亚舟，李贞晓，程年恺，田慧，栗保明. 一种真空触发开关脉冲电源系统研究[J]. 兵工学报, 2017, 38(8): 1469-1475.

基于粗糙集-逼近理想解排序的辐射源威胁排序方法

An Emitter Threat Evaluation Method Based on Rough Set and TOPSIS

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价