24-二硝基苯甲醚基高爆速熔铸炸药爆轰性能表征

doi:10.3969/j.issn.1000-1093.2016.04.012

兵工学报 ›› 2016, Vol. 37 ›› Issue (4): 656-660.doi: 10.3969/j.issn.1000-1093.2016.04.012

24-二硝基苯甲醚基高爆速熔铸炸药爆轰性能表征

李东伟¹，姜振明²，张向荣¹，周霖¹

(1.北京理工大学机电学院，北京 100081；2. 国营第805厂，甘肃白银 730900)

收稿日期:2015-09-04 修回日期:2015-09-04 上线日期:2016-06-20
作者简介:张向荣(1975—)男讲师
基金资助:
国防“086”专项项目(00401030181)

Characterization of New 24-dinitroanisole-based Melt-cast High Detonation Velocity Explosives

LI Dong-wei¹， JIANG Zhen-ming²， ZHANG Xiang-rong¹， ZHOU Lin¹

(1.School of Mechatronical Engineering， Beijing Institute of Technology， Beijing 100081， China；2.No 805 Factory， Baiyin 730900， Gansu， China)

Received:2015-09-04 Revised:2015-09-04 Online:2016-06-20

摘要/Abstract

摘要： 为了揭示2,4-二硝基苯甲醚 (DNAN)基不敏感熔铸炸药的爆轰特性，加快DNAN基熔铸炸药的应用，采用Fortran BKW代码计算了Octol炸药和不同组分DNAN基熔铸炸药的爆轰参数(爆速、爆压)。采用电测法、爆炸概率法和激光干涉测速技术分别对DNAN基配方DNAN 20/奥克托今80和Octol炸药的爆速、爆压、机械感度以及金属板驱动能力进行了试验测试。试验结果表明：该DNAN基炸药的爆速为8 436 m/s，爆压为31.23 GPa，爆轰性能优于Octol炸药；撞击感度为33%，摩擦感度为57%，机械感度低于Octol炸药；驱动金属板速度达到3 045 m/s，优于Octol炸药。该DNAN基高爆速熔铸炸药综合性能优于Octol炸药，可替代Octol炸药用于防空反导和大口径爆炸成型弹丸战斗部。

关键词: 兵器科学与技术, 2, 4二硝基苯甲醚, Fortran BKW, 电测法, 激光速度干涉仪

Abstract: In order to reveal the detonation properties of 2,4-dinitroanisole（DNAN）-based melt-cast explosives and promote the application of this kind of explosives, a computer code is used to calculate the detonation properties of three DNAN-based melt-cast explosives. A series of experiments are carried out to characterize the properties of the DNAN-based explosive (DNAN 20/HMX 80) and Octol. Electrometric method is used to test the detonation velocities and pressures of the two explosives. Explosive probability method is used to test the mechanical sensitivities of the two explosives. Laser interferometer velocimetry (VISAR) is used to test the free surface of copper bar drived by the detonation products. The results show that the detonation properties (detonation velocity is 8 436 m/s and pressure is 31.23 GPa) of DNAN-based explosive (DNAN 20/HMX 80) are better than those of Octol. The mechanical sensitivity of DNAN-based explosive (impact sensitivity is 33% and friction sensitivity is 57%) is lower than that of Octol. The speed of the copper bar drived by the detonation products is 3 045 m/s. The comprehensive performance of DNAN-based explosive (DNAN20/HMX80) is better than that of Octol. The DNAN-based explosive could replace Octol for air defense warhead, antimissile warhead, and large-caliber EFP warhead.

Key words: ordnance science and technoogy, 2,4-dinitroanisole, Fortran BKW, electrometric method, laser interferometer velocimetry

中图分类号:

TJ55

李东伟，姜振明，张向荣，周霖. 24-二硝基苯甲醚基高爆速熔铸炸药爆轰性能表征[J]. 兵工学报, 2016, 37(4): 656-660.

LI Dong-wei， JIANG Zhen-ming， ZHANG Xiang-rong， ZHOU Lin. Characterization of New 24-dinitroanisole-based Melt-cast High Detonation Velocity Explosives[J]. Acta Armamentarii, 2016, 37(4): 656-660.

参考文献

［1］王昕. 美国不敏感混合炸药的发展现状[J]. 火炸药学报, 2007, 30(2): 78-80.
WANG Xin. Current situation of study on insensitive composite explosives in USA[J]. Chinese Journal of Explosives & Propellants, 2007, 30(2): 78-80. (in Chinese)
[2］陈玲, 舒远杰, 徐瑞娟, 等. 含能低共熔物研究进展[J]. 含能材料, 2013, 21(1): 108-115.
CHEN Ling, SHU Yuan-jie, XU Rui-juan, et al. Review on energetic eutectic[J]. Chinese Journal of Energetic Materials, 2013, 21(1): 108-115. (in Chinese)
[3] 王亲会. 熔铸混合炸药用载体炸药评述[J]. 火炸药学报, 2011, 34(5): 25-28.
WANG Qin-hui. Overview of carrier explosive for melt-cast composite explosive[J]. Chinese Joumal of ExpIosives & Propellants, 2011, 34(5): 25-28. (in Chinese)
[4］王红星, 王晓峰, 罗一鸣, 等. DNAN 炸药的烤燃实验[J]. 含能材料, 2009, 17(2): 183-186.
WANG Hong-xing, WANG Xiao-feng, LUO Yi-ming, et al. Cook-off test of DNAN explosive[J]. Chinese Journal of Energetic Materials, 2009, 17(2): 183-186. (in Chinese)
[5］连舜华. 美国的低易损性炸药[J]. 现代兵器, 1987(5): 36-40.
LIAN Shun-hua. Low vulnerable explosives in USA[J]. Journal of Modern Ordnance, 1987(5): 36-40. (in Chinese)
[6］ Mader C L. Fortran BKW: a code for computing the detonation properties of explosives [R]. Los Alamos, New Mexico: Los Alamos Scientific Lab, 1967.
[7］张宝平, 张庆明, 黄风雷. 爆轰物理学[M].北京: 兵器工业出版社, 2001: 165.
ZHANG Bao-ping, ZHANG Qing-ming, HUANG Feng-lei. Detonation physics[M]. Beijing: Ordnance Industry Press, 2001: 165. (in Chinese)
[8］ Mader C L. Numerical modeling of explosives and propellants[M].UK: Taylor & Francis Group, 1997.
[9］张光全, 董海山. 2, 4-二硝基苯甲醚为基熔铸炸药的研究进展[J]. 含能材料, 2010, 18(5): 604-609.
ZHANG Guang-quan, DONG Hai-shan. Review on melt-castable explosives based on 2,4-dinitroanisole[J]. Chinese Journal of Energetic Materials, 2010, 18(5): 604-609.(in Chinese)
[10］欧育湘. 炸药学[M]. 北京: 北京理工大学出版社, 2006: 60-68.
OU Yu-xiang. Explosives[M]. Beijing: Beijing Institute of Technology Press,2006: 60-68. (in Chinese)
[11］李福平, 刘忠良, 胡国丰. 火炸药手册：增订本[M]. 西安：第五机械工业部204研究所，1981.
LI Fu-ping, LIU Zhong-liang, HU Guo-feng. Explosives & propellants manual: an enlarged revision[M]. Xi'an: No.204 Institute of the 5th machinery Industry Ministry，1981.(in Chinese)

[1]	余毅磊, 王晓东, 任文科, 高光发. 三层组合陶瓷复合装甲的抗侵彻性能及其损伤机制[J]. 兵工学报, 2024, 45(1): 44-57.
[2]	李云飞, 高鑫, 陈鹏万, 刘开源. TiB₂/B₄C复相陶瓷自蔓延热爆炸烧结与性能表征[J]. 兵工学报, 2024, 45(1): 26-34.
[3]	张鑫, 林凡, 沈鑫杰. 基于改进SOGI-FLL的旋转弹舵机滞后测试方法[J]. 兵工学报, 2023, 44(2): 428-436.
[4]	尤浩, 常新龙, 赵久奋, 张有宏, 王顺宏. 带攻击角度约束的三维领弹-从弹时间协同制导律[J]. 兵工学报, 2023, 44(11): 3369-3381.
[5]	杨春伟, 刘炳琪, 王继平, 邵节, 韩治国. 基于注意力机制的高超声速飞行器LSTM智能轨迹预测[J]. 兵工学报, 2022, 43(S2): 78-86.
[6]	李博，王博，韩京冶，杨宗睿，栗霖雲，傅畅之. 基于车载计算机的红外图像移动目标检测[J]. 兵工学报, 2022, 43(S1): 66-73.
[7]	余毅磊, 王晓东, 任文科, 马铭辉, 蒋招绣, 高光发. 陶瓷/金属复合靶受12.7mm穿甲燃烧弹侵彻时弹靶破碎特征[J]. 兵工学报, 2022, 43(9): 2307-2317.
[8]	王晓东, 徐永杰, 董方栋, 王昊, 郑娜娜. 凯夫拉与陶瓷复合结构抗侵彻性能数值仿真[J]. 兵工学报, 2022, 43(9): 2360-2366.
[9]	周伯俊, 于传强，刘志浩，柯冰. 基于高压储能的特种车辆快速起竖技术与验证[J]. 兵工学报, 2022, 43(7): 1488-1497.
[10]	高月光，冯顺山，刘云辉，黄岐. 不同端盖厚度的圆柱形装药壳体破片初速分布[J]. 兵工学报, 2022, 43(7): 1527-1536.
[11]	李淑睿，段卓平，白志玲，张旭，黄风雷. 2，4-二硝基苯甲醚基熔铸含铝炸药冲击起爆特性[J]. 兵工学报, 2022, 43(6): 1288-1294.
[12]	阚润哲，聂建新，郭学永，闫石，焦清介，张韬. 不同铝氧比CL-20基含铝炸药深水爆炸能量输出特性[J]. 兵工学报, 2022, 43(5): 1023-1031.
[13]	刘瑞峰, 王昕捷, 黄风雷, 黄亨建. 2，4-二硝基苯甲醚基熔铸炸药宏细观烤燃响应特性数值分析[J]. 兵工学报, 2022, 43(2): 287-296.
[14]	江胜华. 基于磁偶极子的2阶磁场梯度张量缩并方法[J]. 兵工学报, 2022, 43(12): 3122-3131.
[15]	李严星，王琳，闫志维，安瑞，周哲，宁子轩，程焕武，程兴旺. 不同组织Ti6321钛合金在低温高应变速率下的变形和断裂行为[J]. 兵工学报, 2022, 43(12): 3221-3227.

24-二硝基苯甲醚基高爆速熔铸炸药爆轰性能表征

Characterization of New 24-dinitroanisole-based Melt-cast High Detonation Velocity Explosives

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价