产品二维不完全预防性维修间隔期优化研究

doi:10.3969/j.issn.1000-1093.2016.03.015

兵工学报 ›› 2016, Vol. 37 ›› Issue (3): 496-504.doi: 10.3969/j.issn.1000-1093.2016.03.015

产品二维不完全预防性维修间隔期优化研究

韩玉成，贾希胜，白永生，李欣玥

（军械工程学院装备指挥与管理系，河北石家庄 050003）

收稿日期:2015-07-29 修回日期:2015-07-29 上线日期:2016-05-24
通讯作者: 韩玉成 E-mail:hanyucheng805@163.com
作者简介:韩玉成(1990—)男硕士研究生
基金资助:
国家自然科学基金青年科学基金项目(71401173)

Research on Optimization of Two-dimensional Imperfect Preventive Maintenance Intervals of Products

HAN Yu-cheng, JIA Xi-sheng, BAI Yong-sheng, LI Xin-yue

（Department of Equipment Command and Management, Ordnance Engineering College, Shijiazhuang 050003, Hebei, China)

Received:2015-07-29 Revised:2015-07-29 Online:2016-05-24
Contact: HAN Yu-cheng E-mail:hanyucheng805@163.com

摘要/Abstract

摘要： 针对故障受日历时间与使用时间共同影响的二维产品，传统的一维预防性维修已不能满足二维产品的实际需求，鉴于此,提出二维预防性维修概念，以日历时间与使用时间对二维产品进行二维预防性维修决策。建立二维产品故障率函数表达式，对二维预防性维修的过程进行具体的分析，以总期望费用最小为优化目标，建立有限使用期二维不完全预防性维修费用模型。通过实例求出最佳的二维不完全预防性维修间隔期，经对比分析验证了该模型的适用性与有效性，对二维维修策略提出了展望。

关键词: 兵器科学与技术, 二维不完全预防性维修, 数学模型, 虚拟工龄

Abstract: For the products of which the failures are affected by the calendar time and service time, the traditional one-dimensional preventive maintenance can’t meet the actual demand. A concept of two-dimensional preventive maintenance is proposed. The two-dimensional preventive maintenance decision is made according to calendar time and service time. A failure rate function expression of two-dimensional maintenance is established, and the process of two-dimensional imperfect preventive maintenance is analyzed in detail. A cost model of two-dimensional imperfect preventive maintenance is proposed to minimize the consumer’s total expected cost in finite life span. An optimal two-dimensional imperfect preventive maintenance interval is derived through examples, and the the applicability and validity of the proposed model are verified through comparison and analysis. A brief discussion about future research area of two-dimensional maintenance is presented.

Key words: ordnance science and technology, two-dimensional imperfect preventive maintenance, math model, virtual age

中图分类号:

TJ07

韩玉成，贾希胜，白永生，李欣玥. 产品二维不完全预防性维修间隔期优化研究[J]. 兵工学报, 2016, 37(3): 496-504.

HAN Yu-cheng, JIA Xi-sheng, BAI Yong-sheng, LI Xin-yue. Research on Optimization of Two-dimensional Imperfect Preventive Maintenance Intervals of Products[J]. Acta Armamentarii, 2016, 37(3): 496-504.

参考文献

［1］陈相侄. 基于不完全维修的二维产品保证成本研究[D]. 杭州:杭州电子科技大学, 2010.
CHEN Xiang-zhi.Research on the cost of two-dimensional product warranty based on imperfect repair[D].Hangzhou:Hangzhou Dianzi University, 2010.(in Chinese)
[2］ Iskandar B P, Murthy D N P, Jack N. A new repair-replace strategy for items sold with a two-dimensional warranty[J]. Computer and Operations Research, 2005, 32(3): 669-682.
[3］ Chukova S, Johnston M R. Two-dimensional warranty repair strategy based on minimal and complete repairs[J]. Mathematical and Computer Modelling, 2006,44(11/12):1133-1143.
[4］ Jack N, Iskandar B P, Murthy D N P. A repair-replace strategy based on usage rate for items sold with a two-dimensional warranty[J]. Reliability Engineering and System Safety, 2009, 94(2):611-617.
[5］ Varnosafaderani S, Chukova S. A two-dimensional warranty servicing strategy based on reduction in product failure intensity[J]. Computers and Mathematics with Applications, 2012, 63(1):201-213.
[6］ Chen T, Popoval E. Maintenance policies with two-dimensional warranty[J]. Reliability Engineering and System Safety, 2002,77(1): 61-69.
[7］甘茂治, 康建设, 高崎,等. 军用装备维修工程学[M]. 北京:国防工业出版社, 2005:210-211.
GAN Mao-zhi, KANG Jian-she, GAO Qi, et al. Military equipment maintenance engineering[M]. Beijing:National Defense Industry Press, 2005:210-211.(in Chinese)
[8］ Yeh R H, Chen M Y, Lin C Y. Optimal periodic replacement po-licy for repairable products under free-repair warranty[J]. European Journal of Operational Research, 2007,176(3):1678-1686.
[9］ Shahanaghi K, Noorossana R. Failure modeling and optimizing preventive maintenance strategy during two-dimensional extended warranty contracts[J]. Engineering Failure Analysis, 2013,28:90-102.
[10］ Hu Q W, Bai Y S, Zhao J M, et al. Modeling spare parts demands forecast under two-dimensional preventive maintenance policy[J]. Mathematical Problems in Engineering, 2015, 2015:1-9.
[11］ Shafiee M, Chukova S. Two-dimensional warranty cost analysis for second-hand products[J]. Communications in Statistics—Theory and Method, 2011,40(4):684-701.
[12］ Iskandar B P, Murthy D N P. Repair-replace strategies for two-dimensional warranty policies[J]. Mathematical and Computer Modelling, 2003,38(11/13):1233-1241.
[13］ Moskowitz H, Chun Y H. A poisson regression model for two-attribute warranty policies[J]. Naval Research Logistics, 1994, 41(3):355-376.
[14］ Yun W Y, Kang K M. Imperfect repair policies under two-dimensional warranty[J]. Journal of Risk and Reliability, 2007,221(4):239-247.
[15］ Kijima M. Some results for repairable systems with general repair[J]. Journal of Applied Probability, 1989, 26(1):89-102.
[16］ Sahin I, Polatoglu H. Maintenance strategies following the expiration of warranty[J]. IEEE Transactions on Reliability, 1996,45(2):220-228.
[17］ Huang Y S, Chen E, Ho J W. Two-dimensional warranty with reliability-based preventive maintenance[J]. IEEE Transactions on Reliability, 2013,62(4):898-907.

[1]	孙凤，张琪，徐方超，李强，金俊杰，佟玲，张晓友，刘巍巍. 激光光路控制电磁作动器的模糊PID控制特性分析[J]. 兵工学报, 2019, 40(2): 430-441.
[2]	王振春，鲍志勇，曹海要，刘福才，战再吉，王大正. 增强型电磁轨道炮电枢轨道接触特性研究[J]. 兵工学报, 2018, 39(3): 451-456.
[3]	王书铭, 左哲清，延皓，许玲玲，董立静. 偏导射流伺服阀建模及动态特性研究[J]. 兵工学报, 2018, 39(3): 598-607.
[4]	于涛，郝永平，郑斌，李建伟，李广林. 上升扫描式末敏子弹对坦克目标的毁伤效能评估[J]. 兵工学报, 2018, 39(10): 1927-1935.
[5]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[6]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[7]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[8]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[9]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[10]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[11]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[12]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[13]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[14]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[15]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.

产品二维不完全预防性维修间隔期优化研究

Research on Optimization of Two-dimensional Imperfect Preventive Maintenance Intervals of Products

PDF

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价