[1] 白素平, 马宏, 闫钰锋. 激光切割技术在封装去除中的应用[J]. 仪器仪表学报, 2006, 27(6):2599-2600. BAI S P,MA H,YAN Y F. Application of laser cutting technology in wiping off encapsulation[J]. Chinese Journal of Scientific Instrument,2006,27(6):2599-2600.(in Chinese) [2] QUINTERO F, POU J, FERNNDEZ J L, et al. Optimization of an off-axis nozzle for assist gas injection in laser fusion cutting[J]. Optics & Lasers in Engineering, 2006, 44(11):1158-1171. [3] 张钢, 孟庆涛, 钟永彦,等. 五自由度全永磁轴承系统的稳定悬浮特性分析[J]. 机械工程学报, 2015, 51(5):56-63. ZHANG G,MENG Q T,ZHONG Y Y,et al. Stable levitation performance analysis of five degrees of freedom all permanent magnetic bearing system[J]. Journal of Mechanical Engineering, 2015, 51(5): 56-63.(in Chinese) [4] 刘强, 赵勇, 代峰燕, 等. 磁悬浮陀螺飞轮用隐式洛伦兹力磁轴承[J]. 光学精密工程, 2018, 26(2):399-409. LIU Q,ZHAO Y,DAI F Y,et al. Novel internal Lorentz magnetic bearing for magnetic bearing gyrowheel[J]. Optics and Precision Engineering, 2018, 26(2):399-409.(in Chinese) [5] 袁惠群, 李莹, 李东, 等. 磁悬浮轴承弹性转子非线性系统的建模与控制[J]. 兵工学报, 2011, 32(2):247-251. YUAN H Q,LI Y,LI D,et al. The nonlinear model and control of magnetic suspension bearing flexible rotor[J]. Acta Armamentarii, 2011, 32(2):247-251.(in Chinese) [6] MOLENAAR A,ZAAIJER E H,Van BEEK H F. A novel low dissipation long stroke planar magnetic suspension and propulsion stage[C]∥Proceedings of the 6th International Symposium on Magnetic Bearings. Cambridge, MA, US: Massachusetts Institute of Technology, 1998:650-659. [7] 陈本永, 雷勇, 李延宝, 等. 磁悬浮式纳米级微动工作台的理论分析与建模研究[J]. 仪器仪表学报, 2006, 27(9):1125-1128. CHEN B Y,LEI Y,LI Y B,et al. Theoretical analysis and modeling of a magnetic levitation micromotion stage[J]. Chinese Journal of Scientific Instrument, 2006, 27(9):1125-1128.(in Chinese) [8] 李群明, 万梁, 段吉安. 磁悬浮平台系统的机电耦合动力学模型及稳定性分析[J]. 光学精密工程, 2007, 15(4): 535-542. LI Q M,WAN L,DUAN J A,et al. Coupled electromechanical dynamic model of magnetically suspended table system and its stability analysis[J]. Optics and Precision Engineering, 2007, 15(4): 535-542.(in Chinese) [9] 金平,林鹤云, 房淑华, 等. 一种新型直线旋转永磁作动器的分析与实验[J]. 中国电机工程学报, 2011, 31(12):65-70. JIN P,LIN H Y,FANG S H,et al. Analysis and experiment of a novel linear and rotary permanent magnet actuator[J]. Proceedings of the CSEE,2011, 31(12):65-70.(in Chinese)
[10] 汤红诚, 李著信. MATLAB在模糊PID伺服系统控制中的应用[J]. 仪器仪表学报, 2003, 24(4):595-596. TANG H C,LI Z X. The use of MATLAB in fuzzy PID servo system control[J]. Chinese Journal of Scientific Instrument, 2003, 24(4):595-596.(in Chinese) [11] 尚玲艳, 周坚刚. 基于MATLAB的钢板磁悬浮系统仿真研究[J]. 系统仿真学报,2006,18(增刊2):982-984. SHANG L Y,ZHOU J G. Simulation of magnetic levitation system of steel plate based on MATLAB[J]. Journal of System Simulation, 2006,18(S2):982-984.(in Chinese) [12] 王述彦, 师宇, 冯忠绪. 基于模糊PID控制器的控制方法研究[J]. 机械科学与技术, 2011, 30(1):166-172. WANG S Y,SHI Y,FENG Z X. A method for controlling a loading system based on a fuzzy PID controller[J]. Mechanical Science and Technology for Aerospace Engineering, 2011, 30(1):166-172.(in Chinese) [13] 胡均平, 郑聪, 李科军, 等. 精密机床的模糊PID主动隔振系统研究[J]. 噪声与振动控制, 2015, 35(4):193-197. HU J P,ZHENG C,LI K J,et al. Study on an active vibration isolation system with fuzzy-PID control for precise machine tool[J]. Noise and Vibration Control, 2015, 35(4):193-197.(in Chinese) [14] 贺军, 金辉, 陈慧岩. 车辆起步电动离合器控制策略的仿真研究[J]. 兵工学报, 2011, 32(8):931-938. HE J,JIN H,CHEN H Y. Simulation research on control strategy of electromechanic clutch during vehicle starting[J]. Acta Armamentarii, 2011, 32(8):931-938.(in Chinese) [15] 姚春德, 刘小平. 基于模糊PID控制的可变配气相位控制系统仿真研究[J]. 兵工学报, 2007, 28(9):1025-1029. YAO C D,LIU X P. Simulation of variable cam timing control system based on fuzzy-PID[J]. Acta Armamentarii, 2007, 28(9): 1025-1029.(in Chinese) [16] 刘军, 刘振旺, 陈建恩, 等. 基于模糊PID对转子系统的非线性振动控制的研究[J]. 系统仿真学报, 2017,29(1):200-205. LIU J,LIU Z W,CHEN J E,et al. Research of vibration control on nonlinear rotor system with fuzzy-PID[J]. Journal of System Simulation, 2017,29(1):200-205.(in Chinese) [17] 孙凤, 吴利平, 李东,等. 三自由度磁力驱动平台的实验研究[J]. 组合机床与自动化加工技术, 2017(8):55-58. SUN F,WU L P,LI D,et al. Experiment study on 3-DOF magnetic driving platform[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2017(8):55-58.(in Chinese)
第40卷第2期 2019 年2月兵工学报ACTA ARMAMENTARIIVol.40No.2Feb. 2019
|