基于场合故障率的修理装备功能划分算法

doi:10.3969/j.issn.1000-1093.2014.06.024

兵工学报 ›› 2014, Vol. 35 ›› Issue (6): 915-920.doi: 10.3969/j.issn.1000-1093.2014.06.024

基于场合故障率的修理装备功能划分算法

史宪铭^1,2，陈春良²，赵美¹，石全¹

(1.军械工程学院装备指挥与管理系, 河北石家庄 050003;2.装甲兵工程学院技术保障工程系北京 100072)

收稿日期:2013-07-06 修回日期:2013-07-06 上线日期:2014-07-24
作者简介:史宪铭(1975—)男博士后
基金资助:
总装备部维修改革项目（2011年）

Function Partitioning Algorithm of Maintenance Equipment Based on Occasion Failure Rate

SHI Xian-ming^1,2， CHEN Chun-liang²， ZHAO Mei¹， SHI Quan¹

(1.Department of Equipment Command and Management, Ordinance Engineering College, Shijiazhuang 050003, Hebei, China;2.Department of Technique Support, Academy of Armored Force Engineering, Beijing 100072，China)

Received:2013-07-06 Revised:2013-07-06 Online:2014-07-24

摘要/Abstract

摘要： 从武器装备在不同使用条件下故障率不同的视角，对修理装备功能划分问题进行研究。考虑修理装备配置种类、使用场合和容积等因素，以装备主用场合下故障率总和最大为目标，建立了修理装置到修理装备的指派模型；证明了不考虑修理装备容积限制情况下可按照修理装置的主用场合进行修理装置到修理装备初始指派，考虑容积限制时以修理装置的场合故障率差为基础对修理装备中的修理装置进行指派修正；提出了武器装备需两种修理装备情况下的模型求解算法，并通过实例验证了提出的模型与求解方法的科学性。

关键词: 兵器科学与技术, 修理装备, 修理装置, 功能划分, 场合, 故障率

Abstract: Function partitioning of maintenance equipment is studied based on the fact that failure rates are different in different usage conditions. With the consideration of the types, usage occasion and volume of maintenance equipment, an assigning model from maintenance device to maintenance equipment is built for the failure rate in main occasion of maintenance equipment. The maintenance devices can be initially assigned to maintenance equipment by its main usage occasion without consideration of volume limitation, and the assigning correction of maintenance devices is conducted based on the difference between occasion failure rates with the consideration of volume limitation. An assigning algorithm of two maintenance equipment is proposed, and an example is given, which proved the model and solution algorithm are scientific.

Key words: ordnance science and technology, maintenance equipment, maintenance device, function partition, occasion, failure rate

中图分类号:

史宪铭，陈春良，赵美，石全. 基于场合故障率的修理装备功能划分算法[J]. 兵工学报, 2014, 35(6): 915-920.

SHI Xian-ming， CHEN Chun-liang， ZHAO Mei， SHI Quan. Function Partitioning Algorithm of Maintenance Equipment Based on Occasion Failure Rate[J]. Acta Armamentarii, 2014, 35(6): 915-920.

参考文献

［1］李明，刘澎.武器装备发展论证方法与应用[M].北京：国防工业出版社，2000.
LI Ming, LIU Peng. Method and application of weapon development in argumentation process[M]. Beijing: National Defense Industry Press, 2000.(in Chinese)
[2] 万小元，王卓.战略装备保障学[M].北京：国防大学出版社，2002.
WAN Xiao-yuan, WANG Zhuo. Strategic equipment security studies[M]. Beijing: National Defense University Press, 2002.(in Chinese)
[3] Raharjo H, Xie M, Brombacherc A C. A systematic methodology to deal with the dynamics of customer needs in quality function deployment[J]. Expert Systems with Applications, 2011, 38(4): 3653-3662.
[4] Lindstrm J, Plankina D, Lideskog H, et al. Functional product development: criteria for selection of design methods on strategic and operational levels[M]∥The Philosopher's Stone for Sustainability. Germany: Springer Berlin Heidelberg, 2013: 25-30.
[5] Fred C F, Esmail M, Fan Chun. A component selection model for product design[J]. International Journal of Applied Management Science, 2011, 3(1):30-51.
[6] Liu Hao-tien. Product design and selection using fuzzy QFD and fuzzy MCDM approaches[J]. Applied Mathematical Modelling, 2011,35(1):482-496.
[7] Jetter A J, Sperry R C. Fuzzy cognitive maps for product planning: using stakeholder knowledge to achieve corporate responsibility[C]//46th Hawaii International Conference on System Sciences (HICSS). Hawaii: IEEE, 2013: 925-934.
[8] 丁茹，刘建国，支明琴. 保障装备发展战略总体和谐性分析[J].装备指挥技术学院学报，2006,17(2)：19-21.
DING Ru, LIU Jian-guo, ZHI Ming-qin. The general harmony analysis on the development strategy demonstration of support equipment[J]. Journal of the Academy of Equipment Command & Technology, 2006, 17(2): 19-21. (in Chinese)
[9] 郭齐胜，李永，仝炳香，等. 装备型号需求论证综合量化分析方法研究[J]. 装备指挥技术学院学报，2009，20(3)：1-5.
GUO Qi-sheng, LI Yong, TONG Bing-xiang, et al. Study on the synthetical quantitative analysis method of equipment type requirement demonstration[J]. Journal of the Academy of Equipment Command & Technology, 2009, 20(3): 1-5. (in Chinese)

[1]	周伯俊, 于传强，刘志浩，柯冰. 基于高压储能的特种车辆快速起竖技术与验证[J]. 兵工学报, 2022, 43(7): 1488-1497.
[2]	高月光，冯顺山，刘云辉，黄岐. 不同端盖厚度的圆柱形装药壳体破片初速分布[J]. 兵工学报, 2022, 43(7): 1527-1536.
[3]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[4]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[5]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[6]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[7]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[8]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[9]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[10]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[11]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[12]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[13]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[14]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[15]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.

基于场合故障率的修理装备功能划分算法

Function Partitioning Algorithm of Maintenance Equipment Based on Occasion Failure Rate

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价