步枪弹侵彻明胶的表面受力模型

doi:10.3969/j.issn.1000-1093.2014.02.004

兵工学报 ›› 2014, Vol. 35 ›› Issue (2): 164-169.doi: 10.3969/j.issn.1000-1093.2014.02.004

步枪弹侵彻明胶的表面受力模型

莫根林, 吴志林, 冯杰，刘坤

（南京理工大学机械工程学院，江苏南京 210094）

收稿日期:2013-03-08 修回日期:2013-03-08 上线日期:2014-03-25
通讯作者: 莫根林 E-mail:550402699@qq.com
作者简介:莫根林(1987—)，男，博士研究生
基金资助:
国家安全重大基础研究项目(613104)

Surface Pressure model of Rifle Bullets Penetrating into Ballistic Gelatin

MO Gen-lin, WU Zhi-lin, FENG Jie, LIU Kun

(School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China)

Received:2013-03-08 Revised:2013-03-08 Online:2014-03-25
Contact: MO Gen-lin E-mail:550402699@qq.com

摘要/Abstract

摘要： 为研究步枪弹侵彻明胶的平移、翻滚规律，提出了弹头侵彻过程中的表面受力模型即迎风面上的每个微元受到动态压力和材料阻力的作用。通过对弹头表面压力的数值积分，可得到弹头所受的合力和合力矩。在此基础上利用4阶龙格-库塔法求解由刚体质心运动方程和欧拉运动方程组成的弹头运动方程，得到了弹头侵彻明胶时位移、姿态随时间的变化规律。以7.62 mm步枪弹侵彻明胶的实验对表面受力模型进行了间接验证，弹头质心位移和平面投影角度的实验数据和理论预测值误差较小，表明该模型可用于预测刚性步枪弹的表面受力，从而适用于预测弹头侵彻明胶的平移、翻滚规律。

关键词: 兵器科学与技术, 表面受力模型, 刚性弹头, 明胶

Abstract: A surface pressure model is presented to study the translational and tumbling motions of rifle bullets penetrating into ballistic gelatin. In the model, it is assumed that each area element is under the action of normal dynamic pressure and material resistance. The resultant force and moment on a projectile are obtained through numerical integration of surface pressure. The trace of a projectile is calculated by solving spatial motion equations deduced from the mass center motion equations and Euler equations of motion with Runge-Kutta method when the initial conditions are given. A 7.62 caliber bullet is tested to verify the surface pressure model. The agreements between the theoretical results and experimental data including displacements and projection angles show that the model is applicable in predicting the translational and tumbling motions of rifle bullets.

Key words: ordnance science and technology, surface pressure model, rigid projectile, gelatin

中图分类号:

O347

莫根林, 吴志林, 冯杰，刘坤. 步枪弹侵彻明胶的表面受力模型[J]. 兵工学报, 2014, 35(2): 164-169.

MO Gen-lin, WU Zhi-lin, FENG Jie, LIU Kun. Surface Pressure model of Rifle Bullets Penetrating into Ballistic Gelatin[J]. Acta Armamentarii, 2014, 35(2): 164-169.

参考文献

［1］ Kneubuehl B P, Coupland R M, Rothschild M A, et al. Wound ballistics: basics and applications [M]. Berlin: Springer, 2011: 95-100.
[2］ Roecker E T. On yawing motion, velocity decay and path deflection of projectile penetrating cavitating media, ADA168220[R]. Maryland: US Army Ballistic Research Laboratory Aberdeen Proving Ground, 1986.
[3］ Weinacht P, Cooper G R. Analytical solutions for the linear and nonlinear yawing motion in dense media[C]∥23rd International Symposiumon Ballistics. Tarragona, Spain: PAP Congresos, 2007: 1339-1346.
[4］ Peters C E, Sebourn C L, Crowder H L. Wound ballistics of unstable projectiles. part I: projectile yaw growth and retardation[J]. Journal of Trauma, 1996,40(3S):10S-15S.
[5］ Kneubuehl B, Sellier K. Woundballistics: a new understanding of the behavior of a bullet in a dense medium[C]∥Proceedings 13th International Symposium of Ballistics. Stockholm: IBC, 1992: 445- 462.
[6］ Sellier K, Kneubuehl B P. Woundballlistics and the scientific background[M]. New York: Elsevier, 1994:154-168.
[7］刘坤, 吴志林, 徐万和,等. 弹头侵彻明胶的运动模型[J]. 爆炸与冲击,2012,32(6): 616-622.
LIU Kun, WU Zhi-lin,XU Wan-he, et al. A motion model for bullet penetrating gelatin[J]. Explosion and Shock Waves, 2012, 32(6): 616-622.（in Chinese）
[8］ Ben-Dor G, Dubinsky A, Elperin T. Ballistic impact: recent advances in analytical modeling of plate penetration dynamics-a review[J]. Applied Mechanics Reviews, 2005, 58(6): 355-371.
[9］ Warren T L, Tabbara M R. Spherical cavity-expansion forcing function in PRONTO 3D for application to penetration problems, SAND-97-1174[R]. Albuquerque, NM: Sandia National Lab, 1997.
[10］ Warren T L. Simulations of the penetration of limestone targets by ogive-nose 4340 steel projectiles[J]. International Journal of Impact Engineering, 2002, 27(5): 475-496.
[11］ Satapathy S, Bless S. Response of long rods to moving lateral pressure pulse: numerical evaluation in DYNA3D[J]. International Journal of Impact Engineering, 2001, 26(1):663-674.
[12］张延教.高等动力学[M].南京：华东工程学院，1984：56-280.
ZHANG Yan-jiao. Advanced dynamics[M]. Nanjing: East China Institute of Engineering, 1984: 56-280.（in Chinese）
[13］高乃同. 自动武器弹药学[M]. 北京：国防工业出版社,1990：334-336.
GAO Nai-tong. Automatic weapons and ammunition[M]. Beijing: National Defense Industry Press,1990: 334-336.（in Chinese）
[14］ Knudsen P J T, Srensen O H. The initial yaw of some commonly encountered military rifle bullets[J]. Int J Legal Med, 1994, 107(3): 141-146.
[15］ Mo G L, Wu Z L, Liu K. Drag force analysis of spheres penetrating gelatin based on surface integral[J]. Applied Mechanics and Materials, 2012, 105: 561-565.
[16］ Kwon J, Subhash G. Compressive strain rate sensitivity of ballistic gelatin[J]. Journal of Biomechanics, 2010, 43(3):420-425.
[17］ Cronin D S, Falzon C. Dynamic characterization and simulation of ballistic gelatin[C]∥2009 SEM Conference & Exposition on Experimental & Applied Mechanics.Albuquerque, NM: SEM, 2009:1- 4.
[18］ Moy P, Tusit W T, Gunnarsson C L. Tensile deformation of ballistic gelatin as a function of loading rate[C]∥Proceedings of the 6th International Congress and Exposition. Orlando, FL: SEM, 2008:2-5.
[19］ Ottone M L, Deiber J A. Modeling the rheology of gelatin gels for finite deformations. part 1. elastic rheological model[J]. Polymer, 2005, 46(13):4928-4937.
[20］ Ottone M L, Peirotti M B, Deiber J A. Modeling the rheology of gelatin gels for finite deformations. part 2. viscoelastic solid model[J]. Polymer, 2005, 46(13):4938-4949.
[21］ Shephert C J, Appleby-Thomas G J, Hazell P J, et al.The dynamic behavior of ballistic gelatin[J]. AIP Conference Proceedings, 2009, 1195: 1399-1402.

[1]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[2]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[3]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[4]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[5]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[6]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[7]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[8]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[9]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[10]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[11]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[12]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[13]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.
[14]	张亚舟，李贞晓，程年恺，田慧，栗保明. 一种真空触发开关脉冲电源系统研究[J]. 兵工学报, 2017, 38(8): 1469-1475.
[15]	尹冬梅，肖宏成，栗保明. 基于三维梁理论的电磁轨道炮复合身管抗弯性能分析[J]. 兵工学报, 2017, 38(8): 1476-1482.

步枪弹侵彻明胶的表面受力模型

Surface Pressure model of Rifle Bullets Penetrating into Ballistic Gelatin

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价