[1] 张雪鹏, 肖建光, 余庆波,等. 活性药型罩聚能装药破甲后效超压特性[J]. 兵工学报, 2016, 37(8): 1388-1394. ZHANG Xue-peng, XIAO Jian-guang, YU Qing-bo, et al. Armo penetration aftereffect overpressure produced by reactive material liner shaped charge[J]. Acta Armamentarii, 2016, 37(8): 1388-1394. (in Chinese) [2] Sun X Y, Li G, Yuan B H, et al. The effect of the detonation mode on the multi-layered linear explosively-formed projectile[C]∥28th International Symposium on Ballistics. Atlanta, CA, US: International Ballistics Society, 2014: 1266-1275. [3] 尹建平, 王志军, 熊永家, 等. 药型罩曲率半径对周向MLEFP成型的影响[J]. 含能材料, 2013, 21(4):512-516. YIN Jian-ping, WANG Zhi-jun, XIONG Yong-jia, et al. Influence of liner curvature on formation of circumferential multiple linear explosively formed penetrators[J]. Chinese Journal of Energetic Material, 2013, 21(4): 512-516.(in Chinese) [4] Cao Y W, Sun X Y, Yuan B B, et al. Study on design and performance of linear EFP warhead[C]∥28th International Symposium on Ballistics. Atlanta, CA, US:International Ballistics Society, 2014: 173-178. [5] 吴峰, 孔毓琦, 柳科学, 等. 周向MEFP式战斗部结构设计与仿真[J]. 信息技术, 2013, 42(3):110-114. WU Feng, KONG Yu-qi, LIU Ke-xue, et al. Structural design and simulation of circumferential warhead with MEFP[J]. Information Technology, 2013, 42(3): 110-114.(in Chinese) [6] Fong R, William N G. Multiple explosively formed penetrator(MEFP) warhead technology development [C]∥19th International Symposium on Ballistics. Interlaken, Switzerland: International Ballistics Society, 2001: 563-568. [7] 梁振刚, 蒋建伟. 周向MEFP成型规律数值分析[J]. 弹与制导学报, 2015, 35(2): 57-60. LIANG Zhen-gang, JIANG Jian-wei. A numerical analysis on the forming law of circumferential MEFP[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2015, 35(2): 57-60.(in Chinese) [8] 尹建平, 姚志华, 王志军, 等. 药型罩参数对周向MEFP成型的影响[J]. 火炸药学报, 2011, 34(6):53-57. YIN Jian-ping, YAO Zhi-hua, WANG Zhi-jun, et al. Influence of liner parameters on the forming of circumferential MEFP[J]. Chinese Journal of Explosives & Propellants, 2011, 34(6): 53-57.(in Chinese) [9] 刘建青, 顾文彬, 陆鸣, 等. 多点起爆装药结构参数对尾翼EFP成型的影响[J]. 含能材料, 2014, 22(5):594-599. LIU Jian-qing, GU Wen-bin, LU Ming, et al. Effects of multi-point initiation charge configuration parameters on EFP with fine formation[J]. Chinese Journal of Energetic Material, 2014, 22(5): 594-599.(in Chinese)
[10] 王峰. 基于爆轰波对撞原理的新型EFP研究[D]. 南京:南京理工大学, 2012. WANG Feng. Study of a new EFP based on collison principle of detonation waves[D]. Nanjing: Nanjing Unitversity of Science and Technology, 2012.(in Chinese) [11] 张世文, 龙建华, 贾宏志, 等. 平面冲击波在有机玻璃中的衰减测试及数值模拟[J]. 兵工学报, 2016, 37(7): 1214-1219. ZHANG Shi-wen, LONG Jian-hua, JIA Hong-zhi, et al. Measuring and numerical simulation of attenuation of planar shock wave in PMMA[J]. Acta Armamentarii, 2016, 37(7): 1214-1219. (in Chinese)
第38卷 第3期2017 年3月兵工学报ACTA ARMAMENTARIIVol.38No.3Mar.2017
|