TANG Hui, JIAO Zhigang, ZHAO Dongzhi, ZHAO Lijun, ZHU Xiaoping. Calculation model for Operating Range of Proximity Fuze in Explosive Field of Explosive Reactive Armor[J]. Acta Armamentarii, 2021, 42(11): 2321-2326.
[1] 曹贺全,张广明,孙素杰,等.装甲车辆防护技术研究现状与发展[J].兵工学报,2012,33(12):1549-1554. CAO H Q,ZHANG G M,SUN S J,et al.Status and development of protection technology of armored vehicles[J].Acta Armamentarii,2012,33(12):1549-1554.(in Chinese) [2] 房凌晖,郑翔玉,马丽,等.坦克装甲车辆装甲防护发展研究[J].四川兵工学报,2014,35(2):23-26. FANG L H,ZHENG X Y,MA L,et al.Armor protection development of tank & armored vehicle[J].Journal of Sichuan Ordnance,2014,35(2):23-26.(in Chinese) [3] 田博,施坤林,邹金龙,等.近炸引信炸点对弹药毁伤评估的影响[J].探测与控制学报,2020,42(6):1-7,12. TIAN B,SHI K L,ZOU J L,et al.Fuze explosion point effect on ammunition damage assessment[J].Journal of Detection & Control,2020,42(6):1-7,12.(in Chinese) [4] 刘鹏,王雨时,闻泉,等.超音速弹丸低伸弹道的近似解析解[J].探测与控制学报,2016,38(4):42-46,51. LIU P,WANG Y S,WEN Q,et al.Approximate analytical expression of supersonic projectile low trajectory[J].Journal of Detection & Control,2016,38(4):42-46,51.(in Chinese) [5] 王连敏.低速低伸弹道解法[J].兵工学报,1981,2(1):11-18. WANG L M.A solution of the low-speed and flat trajectory[J].Acta Armamentarii,1981,2(1):11-18.(in Chinese) [6] 黄鹤,陈建申,徐鹏,等.破甲反击弹抗串联战斗部的可行性[J].兵工自动化,2019,38(8):55-57. HUANG H,CHEN J S,XU P,et al.Feasibility of anti-series warhead of HEAT counter-attack projectile[J].Ordnance Industry Automation,2019,38(8):55-57.(in Chinese) [7] 郎明君,徐学华.多级串联聚能装药隔爆时间的计算与测试[J].南京理工大学学报,2002,26(6):625-627,631. LANG M J,XU X H.Calculation and test on flame-proof time of multistage-series shaped charge[J].Journal of Nanjing University of Science and Technology,2002,26(6):625-627,631.(in Chinese) [8] 史志鑫. 串联毁伤元对斜置反应装甲目标的侵彻性能研究[D].太原:中北大学,2020. SHI Z X. Research on the penetration performance of tandem damage element to oblique reaction armor target[D].Taiyuan:North University of China,2020.(in Chinese) [9] 万清华. 多三明治结构反应装甲干扰射流作用研究[D].太原:中北大学,2019. WAN Q H. Interference effect of reactive armor with multi-sandwich on shaped charge jet[D].Taiyuan:North University of China,2019.(in Chinese) [10] 万清华,李如江,杨玥,等.多三明治结构反应装甲干扰射流的数值模拟[J].高压物理学报,2018,32(6):123-130. WAN Q H,LI R J,YANG Y,et al.Numerical simulation of interference effect of multi sandwich structure reaction armor to jet[J].Chinese Journal of High Pressure Physics,2018,32(6):123-130. (in Chinese) [11] 张乐.某结构反应装甲对射流干扰的机理研究[D].南京:南京理工大学,2016. ZHANG L.Research on the interferences principle of the ERA to jets[D].Nanjing:Nanjing University of Science and Technology,2016.(in Chinese) [12] 熊良平,黄道业,王凤英. 新型反应装甲结构对长杆弹小法线角侵彻的干扰分析和防护效能[J].爆炸与冲击,2013,33(1): 108-112. XIONG L P,HUANG D Y,WANG F Y.Protection effectiveness of a new explosive reactive armor against penetration of long-rod projectiles with small yaw angles[J].Explosion and Shock Waves,2013,33(1):108-112.(in Chinese) [13] 石艺娜,秦承森.金属射流失稳断裂的理论分析[J].力学学报,2009,41(3):361-369. SHI Y N,QIN C S.Instability and breakup of stretching metallic jets[J].Chinese Journal of Theoretical and Applied Mechanics,2009,41(3):361-369.(in Chinese) [14] 黄正祥.聚能装药理论与实践[M].北京:北京理工大学出版社,2014. HUANG Z X.Theory and practice of shaped charge[M].Beijing:Beijing Institute of Technology Press,2014.(in Chinese) [15] 王树山.终点效应学[M].北京:科学出版社,2019. WANG S S.Terminal effects[M].Beijing:Science Press,2019.(in Chinese)