Research on Visco-hyperelastic Constitutive Model of EPDM

doi:10.3969/j.issn.1000-1093.2014.08.011

Abstract

Abstract: The constant rate uniaxial tension tests and tension-recover tests are conducted to obtain the accurate mechanical property of the EPDM insulation material. A visco-hyperelastic constitutive model is developed based on the mechanical behavior characteristics of EPDM. The method is established by applying the hyperelastic theory which was established under finite deformation condition in combination with linear viscoelastic theory. Then the way to obtain the model parameters is proposed, which is simple and easy to be generalized. The results show that EPDM has the typical hyperelastic mechanical characteristics, and presents a rate-dependent effect. The visco-hyperelastic constitutive model proposed can describe the uniaxial mechanical property of EPDM accurately. The model can provide a theoretical reference for structural integrity analysis of solid rocket motor made of EPDM insulation material.

Key words: solid mechanics, visco-hyperelasticity, constitutive model, ethylene propylene diene monomer, uniaxial tension, linear viscoelasticity

CLC Number:

V435

YANG Xiao-hong, XU Jin-sheng, SUN Jun-li, HU Shao-qing, ZHOU Chang-sheng. Research on Visco-hyperelastic Constitutive Model of EPDM[J]. Acta Armamentarii, 2014, 35(8): 1205-1209.

References

［1］许进升，鞠玉涛，周长省，等. 模数对药柱热应力的影响[J]. 弹道学报，2011，23（2）：74-78.
XU Jin-sheng, JU Yu-tao, ZHOU Chang-sheng, et al. The influence of modulus on grain thermal stress[J]. Journal of Ballistics, 2011, 23(2): 74-78. (in Chinese)
[2] 何志刚，董大鹏，王国林，等. 轮胎超弹性本构材料参数确定的

影响因素分析[J]. 机械工程学报，2008，44（12）：296-302.
HE Zhi-gang, DONG Da-peng, WANG Guo-lin, et al. Influence factors for material parameters determination of hyperelastic constitutive model of vehicle tire rubbe[J]. Chinese Journal of Mechanical Engineering, 2008, 44(12): 296-302. (in Chinese)
[3] 程哲，张正艺，宋杨，等. 橡胶材料超弹性本构模型的简化标定方法[J]. 固体力学学报，2010，31（S1）：50-53.
CHENG Zhe, ZHANG Zheng-yi, SONG Yang, et al. A simplified method to calibrate the hyperealstic constitutive models for rubber materials[J]. Acta Mechanica Solida Sinica,2010, 31(S1): 50-53. (in Chinese)
[4] 邓凯，阳建红，陈飞，等. HTPB 复合固体推进剂本构方程[J]. 宇航学报, 2010，31（7）：1815-1818.
DENG Kai, YANG Jian-hong, CHEN Fei, et al. On constitutive equation of HTPB composite solid propellant[J]. Journal of Astronautics, 2010, 31(7): 1815-1818. (in Chinese)
[5] 周相荣，王强，王宝珍. 一种基于Yeoh函数的非线性粘超弹本构模型及其在冲击仿真中的应用[J]. 振动与冲击，2007，26（5）： 33-37.
ZHOU Xiang-rong, WANG Qiang, WANG Bao-zhen.A nonlinear visco-hyperelastic constitutive model based on Yeoh strain energy function with its application to impact simulation[J]. Journal of Vibration and Shock, 2007, 26(5): 33-37. (in Chinese)
[6] Leu L J, Mukherjee S. Sensitivity analysis of hyperelastic-viscoplastic solids undergoing large deforma- tions[J]. Computational Mechanics, 1994, 15(2): 101-116.
[7] Yang L M, Shim V P W, Lim C T, et al. A visco-hyperelastic approach to modelling the constitutive behaviour of rubber[J]. International Journal of Impact Engineering, 2000, 24(6/7): 545-560.
[8] Yang L M, Shim V P W. A visco-hyperelastic constitutive description of elastomeric foam[J]. International Journal of Impact Engineering, 2004, 30: 1099-1110.
[9] Natali A N, Fontanella C G, Carniel E L. Constitutive formulation and analysis of heel pad tissues mechanics[J]. Medical Engineering & Physics, 2010, 32: 516-522.
[10] Zrida M, Laurent H, Rio G, et al. Experimental and numerical study of polypropylene behavior using an hyper-visco-hysteresis constitutive law[J]. Computational Materials Science, 2009, 45: 516-527.
[11] 胡少青，鞠玉涛，常武军，等. NEPE 固体推进剂粘-超弹性本构模型研究[J]. 兵工学报，2013，34（2）：168-173.
HU Shao-qing, JU Yu-tao, CHANG Wu-jun, et al. A visco-hyperelastic constitutive behaviour of NEPE propellant[J]. Acta Armamentarii, 2013, 34(2): 168-173. (in Chinese)
[12] Pouriayevali H, GUO Y B, SHIM V P W. A visco-hyperelastic constitutive description of elastomer behaviour at high strain rates[J]. Procedia Engineering, 2011,10:2274-2279.

[1]	WANG Guijun, WU Yanqing, HOU Xiao, HUANG Fenglei. Research on the Viscoelastic Constitutive Model of Composite Solid Propellant Containing Damage Based on Mesostructure [J]. Acta Armamentarii, 2023, 44(12): 3696-3706.
[2]	ZHAO Zehu, LI Xianglong, HU Qiwen, WANG Jianguo. Dynamic Mechanical Properties and Damage Constitutive Model of Copper-bearing Garnet-biotite Schist [J]. Acta Armamentarii, 2023, 44(12): 3805-3814.
[3]	NING Jianguo, YANG Shuai, LI Yuhui, XU Xiangzhao. Constitutive Model and Blast Resistance Test of Concrete under Low/Room Temperature Curing [J]. Acta Armamentarii, 2023, 44(10): 2932-2943.
[4]	ZHOU Jin-yu, XIE Li-yang, ZHU Fu-xian, HAN Wen-qin. Meso-scale Probabilistic Model of Fatigue Crack Nucleation Life [J]. Acta Armamentarii, 2016, 37(2): 307-316.
[5]	CHEN Pan， QI Qiong-fang. Coupled Motion Analysis of Finite Ribbed Plate Based on Traveling Wave Approach [J]. Acta Armamentarii, 2016, 37(11): 2128-2135.
[6]	DU Wen-wen，WANG Lin，ZHAO Deng-hui，ZHI Mao-sheng，XU Xin. Study of the Dynamic Behaviors of Ti-5553 Alloy Based on Taylor Bar Impacting Test [J]. Acta Armamentarii, 2015, 36(9): 1750-1756.
[7]	REN Zhi-qian, YU Zong-yue, CHEN Xun, WANG Yan-lei. Stress Analysis of Single-strand Wire Rope Based on Elastic-plastic Constitutive Model [J]. Acta Armamentarii, 2015, 36(9): 1782-1789.
[8]	ZHANG Yi-hua， LIN Dan-yi， YANG Guo-yu. Research on Mechanical Properties of the Contact Surfaces in Bolt Joints [J]. Acta Armamentarii, 2015, 36(5): 946-952.
[9]	ZENG Zhi-yin, GAO Xiao-ke, LIU Peng-ke, YU Hua-sa. Dynamic Constitutive Model of Gun Steel Material and Its Verification [J]. Acta Armamentarii, 2015, 36(11): 2038-2044.
[10]	CHEN Peng， LU Fang-yun， QIN Jin-gui， CHEN Rong， CHEN Jin， LI Zhi-bin， JIANG Bang-hai. Dynamic Compressive Mechanical Properties of Tungstenic Reactive Material [J]. Acta Armamentarii, 2015, 36(10): 1861-1866.
[11]	JIANG Wen-zheng, LIU Ying. Dynamic Response of a Clamped Sandwich Beam under Impact of Low-Impulse Mass [J]. Acta Armamentarii, 2014, 35(8): 1230-1235.
[12]	TAN Hua, YU Yu-ying, DAI Cheng-da, TAN Ye. Poisson’s Ratio of LY12 Aluminum Alloy under Shock Compression [J]. Acta Armamentarii, 2014, 35(8): 1218-1222.
[13]	DONG Xin-long， FU Ying-qian. Experimental and Numerical Study of Adiabatic Shear Failure of TA2 Titanium Alloy under Dynamic Compression [J]. Acta Armamentarii, 2014, 35(7): 1016-1020.
[14]	ZHANG Zhen-ya, MA Yuan-yuan， ZHOU Feng-hua. Finite Element Simulation of Dynamic Crack Propagation in Brittle PMMA Plates [J]. Acta Armamentarii, 2014, 35(6): 872-878.
[15]	LIU Yue, ZHOU Guang-ming, ZHANG Zu-zhi, DU Wan-li, MA Gui-ye. Accurate Calculation for Deformation of Multi-bearing Shafting System [J]. Acta Armamentarii, 2014, 35(3): 305-311.