Research on Accuracy Control of Deep Small Holes by Pulse Electrochemical Machining

doi:10.3969/j.issn.1000-1093.2012.04.006

Abstract

Abstract: In order to realize the processing accuracy of the deep hole on hard-cutting alloys in the pulse electrochemical machining, a dynamic math model for the linear removal rate is established and the effect of process parameters is analyzed also. The effects of pulse width, tool feed speed and insulating layer on the tool are studied experimentally. The experiment results show that the longer pulse width, higher feed speed and insulation of all outside surface of tool can improve the processing accuracy of the deep hole.

Key words: machinofature technique and equipment, pulse electrochemical machining, deep and small hole, linear material removal rate, machining accuracy

CLC Number:

TG662

LI Zhao-long, DI Shi-chun. Research on Accuracy Control of Deep Small Holes by Pulse Electrochemical Machining[J]. Acta Armamentarii, 2012, 33(4): 414-418.

References

［1］ Chryssolouris G, Wollowitz M. Electrochemical hole making[J]. CIRP Ann, 1984,(1): 199-104.
［2］ Jain V K, Yogendra P G, Murugan S. Prediction of anode profile in ECBD and ECD operations[J]. Int J Mach Tool Manuf, 1987,(1):113-134.
［3］ Kozak J, Rajurkar K P, Balkrishna R. Study of electrochemical jet machining process[J]. Tr ASME J Mfg Sci Eng, 1996,(118): 490-498.
［4］ Sharma S, Jain V K, Shekhar R. Electrochemical drilling of inconel super alloy with acidified NaCl electrolyte[J]. Int J Adv Manuf Technol, 2002, 19:492-500.
［5］史先传, 朱荻, 徐惠宇. 电解加工中最小间隙检测方法[J]. 传感器技术, 2005, （5）: 536-539.
SHI Xian-chuan, ZHU Di, XU Hui-yu. Gap monitor and control in electrochemical machining[J]. Mechan Ical Science and Technology, 2005, （5）: 536-539. (in Chinese)
［6］陆永华，赵东标，云乃彰，等. 六维力/加工电流模糊控制电解加工间隙的方法[J]. 南京航空航天大学学报, 2009, （1）: 97-101.
LU Yong-hua, ZHAO Dong-biao, YUN Nai-zhang, et al. Fuzzy controlling in terelectrode gap method of electrochemical machining (ECM ) based on 6-D forces and machining current[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2009, （1）: 97-101. (in Chinese)
［7］ WU Jian-min, XU Jia-wen, WU Rui. Technical experimental study of aluminum alloy in electrochemical machining[J]. Materials Science and Engineering, 2008,(8): 61-63.
［8］ Fascio V, Wüthrich R, Bleuler H. Spark assisted chemical engraving in the light of electrochemistry[J]. Electrochemical Acta, 2004, 49: 3997-4003.
［9］ ZHANG Mei-li, ZHU Di, XU Zheng-yang. Research on surface quality of titanium alloys TC4 in electrochemical machining[J]. Elecreomachining & Mould, 2007,(1): 27-30.
［10］ Kozak J, Rajurkar K P, Ross R F. Computer simulation of pulse electrochemical machining (PECM)[J]. Mater Process Technol, 1991, 28:149-157.
［11］吴建民，徐家文. 基于CFD技术的数控电解加工流场数值分析[J]. 系统仿真学报, 2009, (1):73-75.
WU Jian-min, XU Jia-wen. Numerical simulation of flow field of NC-electrochemical contour evolution machining based on CFD technology[J]. Journal of System Simulation, 2009, (1):73-75. (in Chinese)

[1]	ZHAO Jian， WANG Bing， LIU Zhan-qiang. The Investigation into Burnishing ForceBurnishing Depth and Surface Morphology in Rotary Ultrasonic Burnishing [J]. Acta Armamentarii, 2016, 37(4): 696-704.
[2]	LI Wen, WANG Xiao-mei, XU Ming-gang, ZHANG De-yuan, CHEN Hua-wei. Deep Hole Machining Method for NC Adjustable Diameter Ultrasonic Elliptical Vibration Boring [J]. Acta Armamentarii, 2013, 34(8): 1021-1027.
[3]	LIU Yan-chen, PANG Si-qin, WANG Xi-bin, XIE Li-jing. Experimental Study on Effect of Surface Integrity on High-strength Steel Fatigue Life [J]. Acta Armamentarii, 2013, 34(6): 759-764.
[4]	WANG Ming-huan, LIU Wang-sheng, PENG Wei. Research on Flow-field Characteristics of Gap Multiphase Flow and Experiment of Electrochemical Machining of Spiral Deep Small Hole [J]. Acta Armamentarii, 2013, 34(6): 748-753.
[5]	ZHANG Cheng-mao, ZHANG De-yuan. Simulation Experiment Study on Elliptical Ultrasonic Vibration Boring of Leading Bushing [J]. Acta Armamentarii, 2013, 34(4): 465-470.
[6]	LYU Yu-shan， WANG Jun， ZHAO Cheng-yi， HE Yan. An End-grinding Wheel with the Phyllotactic Pattern of Abrasive Grain Clusters and Its Mill-grinding Experiments [J]. Acta Armamentarii, 2013, 34(12): 1569-1574.
[7]	DONG Zhi-guo， YA Gang， LI Yuan-zong. Material Removal Rate Model of High Viscoelastic Fluid Abrasive Finishing [J]. Acta Armamentarii, 2013, 34(12): 1555-1561.
[8]	QIN Guo-hua, GUO Xi-yuan, YE Hai-chao, LU Yu-ming. A Deterministic Algorithm for Acitve Region of Clamping Force of a Complex Workpiece [J]. Acta Armamentarii, 2012, 33(7): 852-856.
[9]	LIN Bin, CHEN Dong, HAN Zhi-lin, ZHANG Bao-xing, ZHANG Lei. Research on the Cutting Stability of Thin Cylindrical Shell of Aluminum Alloy [J]. Acta Armamentarii, 2012, 33(7): 847-851.
[10]	CHEN Guo-da， JI Shi-ming， JIN Ming-sheng， ZHANG Cai. Layering Shaping Mould Gasbag Polishing Trajectory Planning Method for Equal Residual Figure Error [J]. Acta Armamentarii, 2012, 33(6): 724-729.
[11]	JI Shi-ming， FU You-zhi， TAN Da-peng， LI Chen， TANG Bo， CHI Yong-wei. Study on Dynamic Characteristics of Two-phase Abrasive Flow Based on Shear Stress TransportTurbulent Model [J]. Acta Armamentarii, 2012, 33(4): 443-450.
[12]	LI Ping, ZHANG Kai, XUE Ke-min, WANG Xiao-xi. Simulation and Experimental Study on Liner Formation Based on Warm High-pressure Torsion Technique [J]. Acta Armamentarii, 2012, 33(4): 437-442.
[13]	SU Chong, DING Jiang-min₁, XV Li₁, LI Ming-gao₂. Cutting Characteristics of Single CBN Abrasive Grain and Micromechanics Analysis of WorkpieceMaterial Deformation Behavior [J]. Acta Armamentarii, 2012, 33(4): 425-431.
[14]	XU Kai-zhou₁, WEI Chen-juan₂, HU De-jin₂, XU Li-ming₂. Study on Temperature of WC-Co Coat in Interminttent Grinding with Cup Wheel [J]. Acta Armamentarii, 2012, 33(4): 408-413.
[15]	LI Zhao-long, WEI Dong-bo, DI Shi-chun, L Peng-xiang, SUN Shu-fa. Research on Shaped-tube Electrode Machining Turbulated Hole by Pulse Electrochemical Machining [J]. Acta Armamentarii, 2012, 33(2): 197-202.