[1] 罗观, 殷明, 郑保辉, 等. 高格尼能钝感浇注PBX设计及性能[J]. 含能材料, 2014, 22(4):487-492. LUO Guan, YIN Ming, ZHENG Bao-hui, et al. Design and performance of an insensitive cast PBX with high gurney energy[J]. Chinese Journal of Energetic Materials, 2014, 22(4):487-492. (in Chinese) [2] Xiao J, Wang W, Chen J, et al. Study on the relations of sensitivity with energy properties for HMX and HMX-based PBXs by molecular dynamics simulation[J]. Physica B Condensed Matter, 2012, 407(17):3504-3509. [3] Vadhe P P, Pawar R B, Sinha R K, et al. Cast aluminized explosives (review)[J]. Combustion, Explosion, and Shock Waves, 2008, 44(4):461-477. [4] 谢虓, 肖承, 罗观. HMX基浇注PBX药浆表观黏度的实验研究[J]. 火炸药学报, 2015, 38(2):58-61. XIE Xiao, XIAO Cheng, LUO Guan. Experimental study on the apparent viscosity of HMX-based casting PBX slurry[J]. Chinese Journal of Explosives & Propellants, 2015, 38(2):58-61. (in Chinese) [5] 余文力, 董三强, 朱满林, 等. 导弹战斗部炸药装药的贮存可靠性研究[J]. 空军工程大学学报:自然科学版, 2005, 6(2):43-45. YU Wen-li, DONG San-qiang, ZHU Man-lin, et al. Research on storage reliability of missile warhead explosive charge[J]. Journal of Air Force Engineering University: Natural Science, 2005, 6(2): 43-45. (in Chinese) [6] 焦东明, 杨月诚, 强洪夫, 等. HTPB固体推进剂增塑剂选取分子模拟研究[J]. 化学研究与应用, 2009, 21(6):805-809. JIAO Dong-ming, YANG Yue-cheng, QIANG Hong-fu, et al. Research of selecting plasticizer for HTPB solid propellant by molecular dynamics simulation[J]. Chemical Research and Application, 2009, 21(6):805-809. (in Chinese) [7] 张俊, 刘玉存, 张喜亮, 等. 增塑剂类型对浇注 PBX 药浆表观粘度的影响[J]. 火工品, 2017(2):29-32. ZHANG Jun, LIU Yu-cun, ZHANG Xi-liang, et al. Influences of plasticizer types on the apparent viscosity of casting PBX slurry[J]. Initiators & Pyrotechnics, 2017(2):29-32. (in Chinese) [8] Huang Z P, Nie H Y, Zhang Y Y, et al. Migration kinetics and mechanisms of plasticizers, stabilizers at interfaces of NEPE propellant/HTPB liner/EDPM insulation[J]. Journal of Hazardous Materials, 2012, 229/230(3):251-257. [9] Zhang W, Jiao Q, Yan S, et al. Influence of purification of energetic binders by vacuum rotary evaporation in different conditions[C]∥20th New Trends in Research of Energetic Materials. Pardubice, Czech: University of Pardubice Press, 2017.
[10] 陈春燕, 王晓峰, 高立龙, 等. 固化参数对HTPB固化反应和力学性能的影响[J]. 化学研究与应用, 2013, 25(10):1381-1385. CHEN Chun-yan, WANG Xiao-feng, GAO Li-long, et al. Effects of NCO/OH molar ratio on the cure reaction and mechanical property of HTPB[J]. Chemical Research and Application, 2013, 25(10):1381-1385. (in Chinese) [11] Van Krevelen D W, Hoftyzer P J. Properties of polymers[M]. 3rd ed. Amsterdam, Holland: Elsevier Scientific Publications, 1990: 875. [12] Abou-Rachid H, Lussier L S, Ringuette S, et al. On the correlation between miscibility and solubility properties of energetic plasticizers/polymer blends: modeling and simulation studies[J]. Propellants Explosives Pyrotechnics, 2008, 33(4):301-310. [13] Small P A. Some factors affecting the solubility of polymers[J]. Journal of Applied Chemistry, 1953, 3(2):71-80. [14] Jaidann M, Abou-Rachid H, Lafleur-Lambert X, et al. Modeling and measurement of glass transition temperatures of energetic and inert systems[J]. Polymer Engineering & Science, 2008, 48(6): 1141-1150. [15] 杨雪海, 张伟斌, 杨仍才, 等. 复杂构型PBX截面密度分布CT测试方法[J]. 含能材料, 2016, 24(6):609-613. YANG Xue-hai, ZHANG Wei-bin, YANG Reng-cai, et al. CT test method for the cross-section density distribution of PBX component with complex configuration[J]. Chinese Journal of Energetic Materials, 2016, 24(6):609-613. (in Chinese) [16] Sharma T C, Kumar M, Narang J K, et al. Thermal decomposition and kinetics of plastic bonded explosives based on mixture of HMX and TATB with polymer matrices[J]. Defence Technology, 2017, 13(1):22-32. [17] 殷明, 罗观, 代晓淦, 等. 高固含量HMX基浇注PBX的烤燃试验研究[J]. 火炸药学报, 2014, 37(1):44-48. YIN Ming, LUO Guan, DAI Xiao-gan, et al. Cook-off test investigation of high solid-content casted PBX based on HMX[J]. Chinese Journal of Explosives & Propellants, 2014, 37(1):44-48. (in Chinese)
第39卷 第1期2018 年1月兵工学报ACTA ARMAMENTARIIVol.39No.1Jan.2018
|