柱形测压铜柱的静态特性分析

doi:10.3969/j.issn.1000-1093.2017.02.028

兵工学报 ›› 2017, Vol. 38 ›› Issue (2): 412-416.doi: 10.3969/j.issn.1000-1093.2017.02.028

• 研究简报 • 上一篇

柱形测压铜柱的静态特性分析

王芳¹，郭增贵²，朱明武¹

（1.南京理工大学机械工程学院，江苏南京 210094； 2.国营第641厂，辽宁锦州 121017）

收稿日期:2016-07-12 修回日期:2016-07-12 上线日期:2017-04-01
通讯作者: 朱明武(1933—)，男，教授，博士生导师 E-mail:zhumw105@126.com
作者简介:王芳(1966—)，女，博士研究生。E-mail: wangfang@mail.njust.edu.cn；
郭增贵(1931—)，男，研究员。E-mail: guosong816@sina.com
基金资助:
国防科技工业基础科研计划项目（2014年）

Static Characteristics of Copper Cylinders for Chamber Pressure Measurement

WANG Fang¹, GUO Zeng-gui², ZHU Ming-wu¹

(1.School of Mechanical Engineering,Nanjing University of Science and Technology, Nanjing 210094, Jiangsu, China;2.State-owned Factory 641, Jinzhou 121017, Liaoning, China)

Received:2016-07-12 Revised:2016-07-12 Online:2017-04-01

摘要/Abstract

摘要： 为了提高铜柱测压的精度，对广泛应用于兵器膛压测量的柱形铜柱静态变形规律进行了研究。在合理假设基础上建立了柱形铜柱静态变形的数学模型，并根据大量的铜柱静态校准数据对模型参数进行了估计。根据此模型进行的仿真计算结果与实验数据能很好地吻合，具有对不同规格铜柱的广泛适用性，能可靠地估算铜柱的静态变形规律。依据该数学模型，对铜柱测压灵敏度随变形量变化的规律和加工尺寸偏差对测压精度的影响两方面进行了计算和分析。结果表明：当铜柱压后高度为原始高度的73%时，铜柱的测压灵敏度最高；铜柱及工作活塞的几何尺寸误差是影响测量不确定度的主要因素，通过提高铜柱的加工精度可以明显提高铜柱测压精度。

关键词: 兵器科学与技术, 膛压测量, 测压铜柱, 塑性测压器, 静态特性

Abstract: Copper cylinders as a sensing element of crusher gauges are widely used for measuring the peak pressure in weapon chamber. In order to improve the measuring accuracy, a new mathematic model is proposed to investigate the static deformation of copper cylinders. The model parameters are estimated based on calibrated data.The calculated results are in good agreement with the experimental results. This model can be well applied to estimate the static deformation law of copper cylinders, and has wide applicability to different specifications of copper cylinders. According to the mathematical model, the variation of copper cylinder pressure sensitivity with deformation and the influence of machining dimension deviation on the accuracy of pressure measuring are calculated. When the height of copper cylinder after compression is 73% of its original one, the pressure sensitivity of the copper cylinder is the highest. The geometric dimension tolerances of copper cylinder and piston are the main factors which affect the pressure measurement uncertainty. The pressure measuring precision of copper cylinders can be improved by improving the machining precision obviously. Key

Key words: ordnancescienceandtechnology, chamberpressuremeasurement, coppercylinder, crushergauge, staticcharacteristic

中图分类号:

TJ012.1⁺6

王芳，郭增贵，朱明武. 柱形测压铜柱的静态特性分析[J]. 兵工学报, 2017, 38(2): 412-416.

WANG Fang, GUO Zeng-gui, ZHU Ming-wu. Static Characteristics of Copper Cylinders for Chamber Pressure Measurement[J]. Acta Armamentarii, 2017, 38(2): 412-416.

参考文献

［1］王芳, 孔德仁, 李丽萍. 静标测压铜柱的静动差修正方法研究[J]. 计量学报, 2016, 36(2): 158-161.
WANG Fang, KONG De-ren, LI Li-ping. Research on the correction method of dynamic-static error for the statically calibration of the manometry copper cylinder[J]. Acta Metrologica Sinaca, 2016, 36(2):158-161. (in Chinese)
[2］彭大署. 金属塑性加工原理[M]. 第2版. 长沙: 中南大学出版社, 2014.
PENG Da-shu. Principles of metal forming processes[M]. 2nd ed. Changsha: Central South University Press, 2014. (in Chinese)
[3］ Johnson W, Mellor P B. Engineering plasticity[M]. London: Van Nostrand Reinhold Company, 1973.
[4］刘助柏, 倪利勇, 刘国晖. 大锻件形变新理论新工艺[M]. 北京: 机械工业出版社, 2009.
LIU Zhu-bai, NI Li-yong, LIU Guo-hui. New theory and new technology of deformation of large forgings[M]. Beijing: China Machine Press, 2009. (in Chinese)
[5］ Унксов Е П,Сафаров Ю С,Вентер Р Д, et al. Теория Пластических Деформаций Металлов[M]. Москва: Машинострение, 1983.
[6］田贵义, 李佩华. 铜柱测定膛压装置动态误差分析[J]. 测试技术学报, 2004, 18(增刊):121-124.
TIAN Gui-yi, LI Pei-hua. The dynamic error analyses about the copper columniation measuring pressure equipment in interior ballistics[J]. Journal of Test and Measurement Technology, 2004, 18(S):121-124. (in Chinese)
[7］杨丽侠, 张邹邹, 靳建伟, 等. 塑性测压静态校准用标准铜柱研究[J]. 计测技术, 2013, 33(4):33-36.
YANG Li-xia, ZHANG Zou-zou，JIN Jian-wei, et al. Study of standard copper cylinders for static calibration system of plastic pressure measuring Elements[J]. Metrology and Measurement Technology, 2013, 33(4):33-36. (in Chinese)
[8］伍鹰. 测压铜柱静动态特性分析[D]. 南京: 南京理工大学, 1991.
WU Ying. The analysis of the static and dynamic characteristics of copper cylinder[D]. Nanjing: Nanjing University of Science and Technology, 1991. (in Chinese)



下4篇留版

第38卷
第2期2017 年2月兵工学报ACTA
ARMAMENTARIIVol.38No.2Feb.2017

[1]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[2]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[3]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[4]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[5]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[6]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[7]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[8]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[9]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[10]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[11]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[12]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.
[13]	张磊，李世民，朱刚. 基于时间连续灰色Markov模型的维修器材需求预测方法研究[J]. 兵工学报, 2017, 38(9): 1862-1866.
[14]	张亚舟，李贞晓，程年恺，田慧，栗保明. 一种真空触发开关脉冲电源系统研究[J]. 兵工学报, 2017, 38(8): 1469-1475.
[15]	尹冬梅，肖宏成，栗保明. 基于三维梁理论的电磁轨道炮复合身管抗弯性能分析[J]. 兵工学报, 2017, 38(8): 1476-1482.

柱形测压铜柱的静态特性分析

Static Characteristics of Copper Cylinders for Chamber Pressure Measurement

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价