[1] Grujicic M, Arakere G, Nallagatla H, et al. Computational investigation of blast survivability and off-road performance of an up-armored high mobility multi-purpose wheeled vehicle[J]. Journal of Automobile Engineering, 2009, 223(3): 301-325. [2] Kendale A, Jategaonkar R, Shkoukani M. Study of occupant responses in a mine blast using MADYMO[C]∥47th Annual SAFE Symposium. San Diego, CA, US: SAFE Association, 2009: 1-13. [3] Ramasamy A, Hill A M, Hepper A E, et al. Blast mines: physics, injury mechanisms and vehicle protection[J]. Journal of the Royal Army Medical Corps, 2009, 155(4): 258-264. [4] 张云, 谭梅凤, 石秉良, 等. 世界军用车辆[M]. 北京:国防工业出版社, 2013. ZHANG Yun, TAN Mei-feng, SHI Bing-liang, et al. World military vehicles[M]. Beijing: National Defense Industry Press, 2013.(in Chinese) [5] 路先锋. 基于地雷爆炸的某军用汽车底部防护技术研究[D]. 南京:南京理工大学, 2013. LU Xian-feng. Research on protection technology of vehicle bottom based on mine explosion [D]. Nanjing: Nanjing University of Science and Technology, 2013. (in Chinese) [6] Kania E. Developmental tendency of landmine protection in vehicle [J]. Modeling and Optimization of Physical Systems, 2009(8): 67-72. [7] 王飞, 陈卫东. 爆炸冲击载荷作用下板壳结构数值仿真分析[J]. 强度与环境, 2010, 37(4): 37-39. WANG Fei, CHEN Wei-dong. The numerical simulation analysis of the shell structure subjected to contact explosion[J]. Structure & Environment Engineering, 2010, 37(4): 37-39. (in Chinese) [8] Dharmasena K P, Wadley H N G, Xue Z Y, et al. Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading[J]. International Journal of Impact Engineering, 2008, 35(9): 1063-1074. [9] Kazanci Z, MecitoAgˇG2lu Z. Nonlinear dynamic behavior of simply supported laminated composite plates subjected to blast load[J]. Journal of Sound and Vibration, 2008, 317(3/4/5): 883-897. [10] Hoo Fatt M S, Palla L. Analytical modeling of composite sandwich panels under blast loads[J]. Journal of Sandwich Structures and Materials, 2009, 11(4): 357-380. [11] Anderson J, Behner T, Weiss C, et al. Mine blast loading: experiments and simulations[C]∥ARL Research in Ballistic Protection Technologies Workshop. Herndon VA, US: ARL, 2009. [12] 张中英, 何洋杨, 王乐阳, 等. 车底结构对爆炸冲击波响应特性影响研究[C]∥2009年全国仿真技术学术会议论文集.北京:计算机仿真杂志社,2009: 123-127. ZHANG Zhong-ying, HE Yang-yang, WANG Le-yang, et al. Study on the bottom the structure of the car of the response characteristics of the explosive shock wave impact[C]∥Symposium of National Conference on Simulation Technology. Beijing: Periodical office of Computer Simulation, 2009: 123-127.(in Chinese) [13] Sun J L, Vlahopoulos N, Stabryla T J , et al. Blast event simulation for a structure subjected to a landmine explosion[C]∥SAE 2006 World Congress. Detroit, Michigan, US: SAE, 2006. [14] Kang S G, Gama B A, Yarlagadda S. Modeling the low velocity impact on thick-section composite cylinder[C]∥11th International LS-DYNA Users Conference. Detroit, MI, US: Livermore Software Technology Corp., 2010. [15] Blaze A G, Venkat S C, John W G J. Modeling blast damage of composite plates[C]∥11th International LS-DYNA Users Conference. Detroit,MI, US: Livermore Software Technology Corp., 2010. [16] 翟文, 李峰, 王忠法, 等. 轻型防护型越野车的发展及新型抗冲击复合材料的应用[C]∥第五届中国越野车及改装车大会暨军事轮式车辆装备发展论坛. 温州:中国汽车工程学会越野车专业委员会, 2014:141-150. ZHAI Wen, LI Feng, WANG Zhong-fa, et al. The development of light protective off-road vehicle and the application of new anti-shock composites[C]∥The 5th Conference of Off-road Vehicle & Special Vehicle and Development Forum of Military Wheeled Vehicle. Wenzhou: Off-road Vehicle Branch of Society of Automotive Engineers of China, 2014:141-150. (in Chinese) [17] 王显会, 佘磊, 郭启涛, 等. 基于抗冲击波响应的新型蜂窝夹层结构多目标优化设计[J]. 车辆与动力技术, 2014(4): 25-30. WANG Xian-hui,SHE Lei, GUO Qi-tao, et al. Multi-objective optimization for new honeycomb sandwich structure on blast-resistant response[J]. Vehicle and Power Technology, 2014(4): 25-30. (in Chinese) [18] 卢天健, 张钱城, 金峰. 轻质多孔材料与结构研究的最新进展[J]. 中国材料进展, 2012, 31(1): 13-25. LU Tian-Jian,ZHANG Qian-cheng,JIN Feng. Recent progress in the development of lightweight porous materials and structures[J]. Materials China, 2012, 31(1):13-25. (in English) [19] 张钱城, 杨立博, 韩宾, 等. 非对称结构铝合金波纹夹层板的三点弯曲力学性能研究[J]. 应用力学学报, 2014, 31(6): 836-842. ZHANG Qian-cheng, YANG Li-bo, HAN Bin, et al. Three-point bending properties of asymmetric aluminum sandwich panels with corrugated cores[J]. Chinese Journal of Applied Mechanics, 2014, 31(6): 836-842. (in Chinese) [20] 张钱城, 卢天健, 何思渊, 等. 闭孔泡沫铝的孔结构控制[J]. 西安交通大学学报, 2007, 40(3): 255-270, 252. ZHANG Qian-cheng,LU Tian-jian,HE Si-yuan,et al. Control of pore morphology in close-celled aluminum foams[J]. Journal of Xi'an Jiaotong University, 2007, 40(3): 255-270, 252. (in Chinese) [21] 张钱城, 郝方楠, 李裕春,等. 爆炸冲击载荷作用下车辆和人员的损伤与防护研究[J]. 力学与实践, 2014, 36(5): 527-539. ZHANG Qian-cheng, HAO Fang-nan, LI Yu-chun, et al. Research progress in the injury and protection to vehicle and passengers under explosive shock loading[J]. Mechanics In Engineering, 2014, 36(5): 527-539.(in Chinese) [22] 多功能材料与结构教育部重点实验室. 点阵结构与材料冲击动力学[EB/OL]. [2015-08-03]. http:∥lmms.xjtu.edu.cn/ research/273514/. MOE Key Laboratory for Multifunction Materials and Structures. Lattice structure and impact dynamics of materials [EB/OL].[2015-08-03]. http:∥lmms.xjtu.edu.cn/ research/273514/. [23] Wu E, Jiang W S. Axial crush of metallic honey-combs[J]. International Journal of Impact Engineering, 1997, 19(5) :439-456. [24] Xue Z Y, John W H. A comparative study of impulse-resistant metal sandwich plates[J]. International Journal of Impact Engineering,2004, 30(10): 1283-1305. [25] Fujiwara H, Tokuda O, Watanabe K, et al. Optimal shock-absorbing design of a seat of a military vehicle subject to blast load (Modeling and proposal of a vehicle acceleration model)[J]. Transactions of the Japan Society of Mechanical Engineers, 2013, 79(807): 4153-4163. [26] Thanyani P, David R, Frans B. In pursuit of vehicle landmine occupant protection:evaluating the dynamic response characteristic of the military lower extremity leg (MiL-Lx) compared to the Hybrid III (HIII) lower leg[C]∥Science Real and Relevant Conference. Pretoria, South Africa: CSIR, 2010. [27] Lafrance,L P, Eng P. Mine blast protection system for military support vehicles[J]. American Society of Mechanical Engineers, Pressure Vessels and Piping Division,1998,361: 305-309. [28] Grujicic M, Arakere G, Bell W C, et al. Computational investigation of the effect of up-armouring on the reduction in occupant injury or fatality in a prototypical high mobility multi-purpose wheeled vehicle subjected to mine blast[J]. Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, 2009, 223(7): 903-920. [29] 胡远志, 曾必强, 谢书港. 基于LS-DYNA 和HyperWorks的汽车安全仿真分析[M]. 北京: 清华大学出版社, 2011: 11-17. HU Yuan-zhi, ZENG Bi-qiang, XIE Shu-gang. Simulation of automobile safety based on LS-DYNA and HyperWorks [M].Beijing:Tsinghua University Press, 2011: 11-17.(in Chinese) [30] Bocchieri R T, Kirkpatrick S W, Peterson B. Simulation- based design of vehicles exposed to blast threats for improved occupant survivability[C]∥3rd International Conference on Safety and Security Engineering. Rome, Italy: WIT Computational Mechanics, 2009: 459-470. [31] 郭仕贵, 张中英, 刘自力, 等. 反坦克车底地雷威力数值分析[J]. 兵工学报, 2010, 31(7): 968-972. GUO Shi-gui, ZHANG Zhong-ying, LIU Zi-li, et al. Numerical simulation and analysis on power of anti-tank belly mine[J]. Acta Armamentarii, 2010, 31(7): 968-972. (in Chinese) [32] 浦锡锋, 王仲琦, 白春华, 等. 用于爆炸流场与结构间相互作用分析的Euler-Lagrange耦合模拟技术[J]. 爆炸与冲击, 2011, 31(1): 6-10. PU Xi-feng, WANG Zhong-qi, BAI Chun-hua, et al. An Euler-Lagrange coupling method for numerical simulation of explosion-structure interaction[J]. Explosion and Shock Waves, 2011, 31(1): 6-10. (in Chinese) [33] 赵焕娟, 黄平, 钱新明. 救生舱板壳结构抗冲击结构安全分析及优化对策[J]. 煤炭学报, 2013, 38(6): 1096- 1100. ZHAO Huan-juan, HUANG Ping, QIAN Xin-ming. Structure safety analysis and optimization of refuge chamber shell under explosion load[J]. Journal of China Coal Society, 2013, 38(6): 1096-1100. (in Chinese) [34] Willianms K, Poon K. A numerical analysis of the effect of surrogate anti-tank mine blasts on the M133, DREV TM-2000-007 [R]. Valcartier, Quebec, Canada: DRDC, 2004: 1-19. [35] Barker C, Howle D. Predicting floor velocity of a vehicle subjected to an underbody blast event[C]∥80th Shock & Vibration Symposium. San Diego, US: Shock and Vibration Information Analysis Center, 2009: 719-729. [36] Chen T Y, Hao J H. An efficient and practical approach to get a better optimum solution for structural optimization[J]. Engineering Optimization, 2012, 44(8): 242-265. [37] Goel T, Hafkta R T, Shyy W. Comparing error estimation measures for polynomial and Kriging approximation of noise-free functions[J]. Structural and Multidisciplinary Optimization, 2009, 38(5): 429-442. [38] Kennedy M, O′Hagan A. Bayesian calibration of computer models[J]. Journal of the Royal Statistical Society: Series B (Statistical Methodology), 2001, 63(3): 425-464. [39] Grujicic M, Marvi H, Arakere G, et al. The effect of up-armoring of the high-mobility muli-purpose wheeled vehicle (HMMWW) on the off-road vehicle performance[J]. Multidiscipline Modeling in Materials and Structures, 2010, 2(6): 229-256. [40] Lou K, Perciballi W, Tierney J, et al. Optimization of fastener system design for blast protection appliqués[C]∥78th Shock and Vibration Symposium. Philadelphia, PA: Shock and Vibration Information Analysis Center , 2007. [41] Mohamed B T, Jinhua H, Brendan J O, et al. Optimization of joint design for bottom panel of a military vehicle for shock reduction under blast loading[C]∥77th Shock and Vibration Symposium. Monterey, CA, US: Shock and Vibration Information Analysis Center, 2006. [42] Guo Q T, Zhou Y B, Wang X H, et al. Numerical simulations and experimental analysis of a vehicle cabin and its occupants subjected to a mine blast[J]. Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, 2016, 230(5):10.1177/ 0954407015591098. [43] 魏然, 王显会, 周云波, 等. 帕累托最优在车辆底部防护结构设计中的应用研究[J]. 兵工学报, 2015, 36(6): 1061-1066. WEI Ran, WANG Xian-hui, ZHOU Yun-bo,et al. Application study of protective vehicle underbody with Pareto optimality[J]. Acta Armamentarii, 2015, 36(6): 1061-1066. (in Chinese) [44] 张堃, 郑雅丽, 王显会, 等. 基于遗传算法的某防护结构优化设计[J]. 车辆与动力技术, 2014, 134(2): 34-38. ZHANG Kun, ZHENG Ya-li, WANG Xian-hui, et al. Optimization of a protective structure based on genetic algorithm[J]. Vehicle and Power Technology, 2014, 134(2): 34-38. (in Chinese) [45] 郑雅丽, 王显会, 张堃, 等.基于响应面法的某防护结构优化设计[J].机械工程与自动化, 2014(1):40-42. ZHENG Ya-li, WANG Xian-hui, ZHANG Kun, et al. Protective structure optimization based on response surface methodology[J]. Mechanical Engineering and Automation, 2014(1): 40-42. (in Chinese) [46] 王显会, 吴旭, 魏然, 等. 爆炸冲击波作用下某军用汽车燃油箱防护强度分析[C]∥ 2012中国汽车工程学会越野车技术分会学术年会论文集.武汉:中国汽车工程学会, 2012: 220-226. WANG Xian-hui, WU Xu, WEI Ran, et al. The protection level analysis of a military truck’s fuel tank subjected explosive blaster wave[C]∥2012 Annual Conference of SUV Branch of SAE-China. Wuhan: Society of Automotive Engineers of China, 2012: 220-226.(in Chinese) [47] Roy C J, Oberkampf W L. A comprehensive framework for verification, validation, and uncertainty quantification in scientific computing[J]. Computer Methods in Applied Mechanics and Engineering, 2011, 200(25): 2131-2144. [48] Khuri A I, Mukhopadhyay S. Response surface methodology [J]. Wiley Interdisciplinary Reviews: Computational Statistics, 2010, 2(2): 128-149. [49] HFM-090 Task Group 25. Test methodology for protection of vehicle occupants against anti-vehicular landmine effects, TR-HFM-090[R]. France: RTO/NATO, 2007. [50] Williams K. Numerical simulation of light armored vehicle occupant vulnerability to anti-vehicle mine blast[C]∥7th International LS-DYNA Users Conference. Dearborn, Michigan:LSTC and ETA, 2002: 8-14. [51] NATO. STANAG 4569 Protection levels for occupants of logistic and light armored vehicles[S]. Brussels: Allied Engineering Publication, 2004. [52] NATO. STANAG 4569 Protection levels for occupants of armored vehicles[S]. 2nd ed. Brussels: Allied Engineering Publication, 2012. [53] Frank D. Methods to verify protection levels[J]. Wehrtechnischer Report. 2009(6):30-32. [54] Reineckea J D, Snymana I M, Ahmeda R, et al. A safe and secure South Africa: vehicle landmine protection validation testing[C]∥2nd CSIR Biennial Conference. Pretoria, South Africa: CSIR, 2008. [55] AEP-55 Procedures for evaluating the protection level of logistic and light armored vehicles Volume 2[S]. Brussels: Allied Engineering Publication, 2006. [56] Reineckea J D, Snymana I M, Ahmeda R, et al. A safe and secure S.A.: Blast characterization through impulse measurements[C]∥2nd CSIR Biennial Conference. Pretoria, South Africa: CSIR, 2008 . [57] Ahmed R, Reinecke J D, Snyman I, et al. The design and implementation of a lower leg impact tester to assist in lower limb injury criteria research[C]∥Science Real and Relevant Conference. Pretoria, South Africa: CSIR, 2010. [58] Pandelani T, Reinecke D, Beetge F. The evaluation of the South African surrogate leg for landmine protection injury measurements[C]∥ Seventh South African Conference on Computational and Applied Mechanics. Pretoria, South Africa: CSIR, 2010: 292-302. [59] Vehicle hardening[EB/OL]. (2011-07-07)[2013-05-07]. http:∥www.globalsecurity. org/military/systems/ ground/vehicle-hardening.htm. [60] Ramasamy A, Hill1A M, Heppe A E, et al. Blast mines: Pphysics, injury mechanisms and vehicle protection[J]. Journal of the Royal Army Medical Corps, 2009, 155(4): 258-264. [61] Armor survivability kit (ASK)[EB/OL]. (2011-07-07) [2014-01-07]. http:∥www.globalsecurity. org/ military/systems/ground/ask.htm. [62] Fragmentary armor (Frag) kits[EB /OL]. (2011-07-07)[2014-02-17]. http:∥www.globalsecurity. org/ military/systems/ground/frag-armor.htm. [63] HMMWV marine armor kit (MAK) [EB/OL]. (2011-07-07) [2015-05-07]. http:∥www. globalsecurity.org/military/systems/ground/mak.htm. [64] FMTV RADIAN armor crew kits (RACKs)[EB/OL]. (2011-07-07) [2015-05-07]. http:∥www. globalsecurity.org/military/systems/ground/ fmtv-racks.htm. [65] MTVR armor protection kit(APK) & MTVR Armor System(MAS) [EB/OL]. (2011-07-07)[2015-05-17]. http:∥www.globalsecurity.org/military/ systems/ground/mtvr-armor.htm. [66] FHTV crew protection kit (CPK)[EB/OL]. (2011-07-07) [2015-05-17]. http:∥www. globalsecurity.org/military/systems/ground/hemtt-cpk.htm. [67] Long-term armor strategy (LTAS)[EB/OL]. (2011-12-09) [2015-08-09]. http:∥www. globalsecurity.org/military/systems/ground/ltas.htm. [68] Mine resistant ambush protected (MRAP) vehicle program[EB/OL]. (2012-10-01)[2015-08-07].http:∥www.globalsecurity.org/military/systems/ground/mrap.htm. [69] Casspir [EB/OL]. [2015-08-03]. http:∥ www.globalsecurity.org/military/world/rsa/casspir.htm. [70] Grujicic M, Marvi H, Arakere G, et al. The effect of up-armoring of the high-mobility multi-purpose wheeled vehicle (HMMWW) on the off-road vehicle performance[J]. Multidiscipline Modeling in Materials and Structures, 2010, 6(2): 229-256. [71] Joint light tactical vehicle (JLTV) [EB/OL]. [2015-06-03]. http:∥www.globalsecurity.org/ military/systems/ground/jltv.htm. |