沿海两栖车辆腐蚀现状及腐蚀综合控制技术

doi:10.3969/j.issn.1000-1093.2016.07.018

摘要/Abstract

摘要： 针对两栖车辆在海洋环境下的使用情况，全面系统地介绍了两栖车辆在海洋环境下的腐蚀情况，并针对腐蚀问题和规律，提出两栖车辆腐蚀综合控制的理论及防腐设计原则。重点介绍了两栖车辆Al-Zn-In-Mg-Ga-Mn六元牺牲阳极材料、陶瓷型耐磨蚀涂层、复合防腐涂覆层、异种金属电位匹配、高分子密封防腐等专项腐蚀防护技术，提出树立全系统和全过程腐蚀综合控制的思想，制定以预防、控制和治理为主要内容的工艺规程，构建腐蚀控制维修保障的配套技术手段，从顶层完善工腐蚀控制理论体系。

关键词: 兵器科学与技术, 两栖车辆, 腐蚀控制, 海洋环境

Abstract: The corrosion status of amphibious vehicles is comprehensively introduced for the usage of amphibious vehicle in marine environment. The integrated corrosion control theories and anti-corrosion design principles of amphibious vehicles are proposed according to corrosion problems and laws. This paper highlights Al-Zn-In-Mg-Ga-Mn sacrificial anode materials for amphibious vehicle, abrasion resistant ceramic coating, composite anticorrosion coating technology, potential matching technology of dissimilar metals, polymer sealing anti-corrosion technology, and special corrosion protection technology. The whole process of system-wide corrosion control ideas is set up, and a technological procedure of prevention, control and governance is developed. The supporting technology for corrosion control and maintenance support is established, and the theoretical system of corrosion control is improved from the top-level.

Key words: ordnance science and technology, amphibious vehicle, corrosion control, marine environment

中图分类号:

TJ811

黄燕滨，周科可，巴国召，时小军，刘谦. 沿海两栖车辆腐蚀现状及腐蚀综合控制技术[J]. 兵工学报, 2016, 37(7): 1291-1298.

HUANG Yan-bin， ZHOU Ke-ke, BA Guo-zhao, SHI Xiao-jun, LIU Qian. The Corrosion Status of Amphibious Vehicles along the Coast and Integrated Corrosion Control Technology[J]. Acta Armamentarii, 2016, 37(7): 1291-1298.

参考文献

［1］ Wang X Z, He Y R, Zheng Y, et al. Analytic estimation and numerical modeling of actively cooled thermal protection systems with nickel alloys[J].Chinese Journal of Aeronautics,2014,27(6):1401-1412.
[2］杨守杰,戴圣龙.航空铝合金的发展回顾与展望[J].材料导报,2005,19(2):76-80
YANG Shou-jie, DAI Sheng-long. A glimpse at the development and application of aluminum alloys in aviation industry[J].Materials Review,2005,19(2):76-80.(in Chinese)
[3］杨守杰,杨霞.高强度铝合金的研究进展[J].粉末冶金工业,2010,20(5):46-51
YANG Shou-jie, YANG Xia. Progress in high-strength aluminum alloy research[J]. Powder Metallurgy Industry, 2010,20(5):46-51. (in Chinese)
[4］ Dixit M, Mishra R S, Sankaran K K. Structure-property correlations in Al 7050 and Al 7055 high-strength aluminum alloys[J]. Materials Science and Engineering A, 2008, 478(1/2):163-172.
[5］侯保荣.海洋腐蚀与防护[M].北京:科学出版社,1997:5-23.
HOU Bao-rong. Marine corrosion and protection[M]. Beijing: Sience Press,1997:5-23.(in Chinese)
[6］黄桂桥.金属材料在海洋飞溅区的腐蚀[J].材料保护,1999，32(2):28-30.
HUANG Gui-qiao. Corrosion of metallic materials in marine splash zone[J]. Materials Protection,1999,32(2):28-30.(in Chinese)
[7］李春玲,鲁玉祥,郭丽娟,等.电弧喷涂铝涂层海洋飞溅区腐蚀模拟试验研究[J].石油化工腐蚀与防护,2010,27(2):16-20
LI Chun-ling, LU Yu-xiang, GUO Li-juan, et al.Corrosion behavior of aluminum coating by arc spraying in simulated marine splash zone[J].Corrosion and Protection in Petrochemical Industry,2010,27(2):16-20.(in Chinese)
[8］绍怀启,韩文礼,王雪莹,等.海洋飞溅区钢结构的腐蚀规律与防护措施[J].腐蚀与防护,2008,29(11):646-649
SHAO Huai-qi, HAN Wen-li, WANG Xue-ying, et al. Corrosion and protection of offshore steel structures in splash zone[J].Corrosion and Protection,2008,29(11):646-649.(in Chinese)
[9］ Gomaa E, Mohsen M, Taha A S, et al. A study of annealing stages in Al-Mn (3004) alloy after cold rolling using positron annihilation lifetime technique and Vickers microhardness measurements[J]. Materials Science and Engineering A, 2003, 362(1/2):274-279.
[10］王祝堂,田荣璋.铝合金及其加工手册[M].长沙::中南大学出版社,2005.
WANG Zhu-tang, TIAN Rong-zhang. Aluminum alloy and its processing handbook［M］. Changsha: Central South University Press，2005．(in Chinese)
[11］王冠,林晓群.冷加工对含Mn铝合金管腐蚀行为的影响[J].金属学报,2011,47(3):361-366
WANG Guan, LIN Xiao-qun. Cold working of the influence of Mn aluminium alloy tube corrosion behavior[J].Journal of Metal,2011,47( 3) :361-366.(in Chinese)
[12］ Martins J P, Carvalho A L M. Microstructure and texture assessment of Al-Mn-Fe-Si(3003) aluminum alloy produced by continuous and semi continuous casting processes[J]. Journal of Materials Science,2009,44(2):966-967.
[13］赵永岗,吕红军.铝合金导电化学氧化工艺研究[J].表面技术,2013,42(3):67-69.
ZHAO Yong-gang, LYU Hong-jun. aluminum alloy conductive chemical oxidizing process study[J].Surface Technology,2013,42(3):67-69.(in Chinese)
[14］ Duan J Z, Wu S R, Zhang X J. Corrosion of carbon steel influenced by anaerobic biofilm in natural seawater[J].Electrochemical Acta,2008,54(1):22-28.
[15］陈群志,崔常京.LY12CZ铝合金腐蚀损伤的概率分布及其变化规律[J].装备环境工程,2005,2(3):1-6
CHEN Qun-zhi, CUI Chang-jing. Probability distribution and variations of corrosion damage of LY12CZ aluminum alloys [J].Equipment Environmental Engineering, 2005,2(3):1-6.(in Chinese)
[16］王刚,金平,谭晓明,等.海洋环境下7B04铝合金腐蚀损伤演化规律研究[J].中国腐蚀与防护学报,2012,32(4):338-342.
WANG Gang, JIN Ping, TAN Xiao-ming, et al. Research on corrosion damage evolvement rule of 7B04 aluminum alloy under ocean environment[J].Journal of Chinese Society for Corrosion and Protection,2012,32(4):338-342.(in Chinese)
[17］ Codaro E N, Nakazato R Z, Horovistiz A L. An image processing method for morphology characterization and pitting corrosion evaluation[J].Material Science Engineering,2002, A334(2):298-306.
[18］黄钰,程西云. 电弧喷涂锌铝合金涂层的防腐机理和应用现状[J].热加工工艺,2014,43(4):9-12
HUANG Yu, CHENG Xi-yun.Anticorrosion mechanism and application status of arc-sprayed Zn-Al alloy coating[J]. ,Hot Working Technology,2014,43(4):9-12.(in Chinese)
[19］ Mishra S K, Rupa P K P, Pathak L C, et al. Surface andnanoindentation studies on nanocrystalline titanium diboride thin film deposited by magnetron sputtering[J].Thin Solid Films,2007,515(17):6884-6889.
[20］张胜涛,王艳波,侯保荣.Y112铝合金表面氧化膜抗氯离子腐蚀能力的研究[J].汽车工艺与材料,2005,4(3):67-69.
ZHANG Sheng-tao, WANG Yan-bo, HOU Bao-rong. Y112 aluminum alloy surface chloride ion erosion resistance of the oxide film studies[J]. Automobile Technology and Material, 2005,4(3): 67-69.(in Chinese)
[21］ Hasannejad H, Shahrabi T, Aliofkhazraei M. Effects of acetic acid on microstructure and electrochemical properties of nano cerium oxide films coated on AA7020-T6 aluminum alloy[J]. Rare Metals, 2009, 28(1):98-101.
[22］ Arya C, Vassie P R W. Influence of cathode-to-anode area ratio and separation distance on galvaniac corrosion currents of steel in concrete containing chlorides[J].Cement and Concrete Research, 1995,25(5):989-991.
[23］艾俊哲,梅平,郭兴蓬.NaCl水溶液中缓蚀剂控制电偶腐蚀研究[J].中国腐蚀与防护学报,2008,28(2):45-49.
AI Jun-zhe, MEI Ping, GUO Xing-peng. Galvanic corrosion inhibitor control research in NaCl aqueous solution[J]. Chinese Journal of Corrosion and Protection, 2008, 28(2):45-49.(in Chinese)
[24］王曰义.铝合金在流动海水中的腐蚀行为[J].装备环境工程,2005,2(6):34-37.
WANG Yue-yi. Resistance foraluminum alloy in flowing seawater corrosion[J]. Equipment Environmental Engineering,2005,2(6): 34-37.(in Chinese)
[25］陈兴伟,吴建华,王佳,等.电偶腐蚀影响因素研究进展[J].腐蚀科学与防护技术,2010,4(22):89-92.
CHEN Xing-wei, WU Jian-hua, WANG Jia, et al. Galvanic corrosion effect factors were reviewed[J]. Corrosion Science and Protection Technology, 2010,4(22):89-92.(in Chinese)
[26］张全成,吴建生,郑文龙,等.周浸加速循环腐蚀试验中耐候钢锈层的电化学特征[J].机械工程材料,2002, 26(8):22-24.
ZHANG Quan-cheng, WU Jian-sheng, ZHENG Wen-long, et al. Weeks leaching speed cycle corrosion test in the electrochemical characteristics of weathering steel rust layer[J]. Mechanical Engineering Material, 2002, 26 (8):22-24.(in Chinese)
[27］ El-Mahdy G A, Kim K B. AC impedance study on the atmospheric corrosion of aluminum under periodic wet-dry conditions[J]. Electrochim Acta, 2004,49(12):1937-1948.
[28］侯保荣.海洋钢结构浪花飞溅区腐蚀控制技术[M].北京:科学出版社,2011.
HOU Bao-rong. Technology of corrosion control of marine steel structure in splash zone[M].Beijing: Science Press,2011.(in Chinese)
[29］ Dolinek S, utariAcˇG2 B, KopaAcˇG2 J. Wear mechanisms of cutting tools in high-speed cutting processes[J]. Wear, 2001, 250(1):349-356.
[30］罗久林,董原生,郭金茂,等.两栖装甲装备腐蚀控制探讨[J].车辆与动力技术,2006(3):55-59.
LUO Jiu-lin, DONG Yuan-sheng, GUO Ji-mao, et al. The discuss on corrosion control of amphibian armored weapon[J]. Vehicle & Power Technology,2006(3):55-59.(in Chinese)
[31］李金桂.防腐蚀表面工程技术[M].北京:化学工业出版社,2003.
LI Jin-gui. Anti-corrosion surface engineering technologies [M].Beijing: Chemical Industry Press, 2003.(in Chinese)
[32］ Alvarez O, Gonzalez C, Aramburo G, et al. Characterization and prediction of microstructure in Al-Zn-Mg alloys[J].Material Science Engineering,2005,402(1):320-324.
[33］ Shibli S M A, Gireesh V S, Sony G. Surface catalysis based on ruthenium dioxide for effective activation of aluminum sacrificial anodes[J]. Corrosion Science,2004,46(4):819-825.
[34］万冰华,费敬银,王少鹏,等. 牺牲阳极材料的研究、应用及展望[J].材料导报,2010,24(10):87-93.
WAN Bing-hua, FEI Jing-yin, WANG Shao-peng, et al. Research application and prospect of sacrificial anode materials[J]. Materials Review, 2010,24(10):87-93.(in Chinese)
[35］黄燕滨,宋高伟,丁华东,等. 牺牲阳极的阴极保护电位的测定与比较[J]. 装备环境工程, 2011, 8(3):82-85.
HUANG Yan-bin,SONG Gao-wei, DING Hua-dong, et al. Measurement and comparison of cathodic protection potential of different sacrificial anode material [J]. Equipment Environmental Engineering, 2011, 8(3):82-85.(in Chinese)
[36］黄燕滨,宋高伟,刘学斌,等. Al-Zn-In-Mg-Ga-Mn牺牲阳极腐蚀防护行为研究[J]. 中国腐蚀与防护学报, 2012, 32(1):44-47.
HUANG Yan-bin, SONG Gao-wei, LIU Xue-bin, et al. Corrosion protection of Al-Zn-In-Mg-Ga-Mn aluminous sacrificial anode[J].Journal of Chinese Society for Corrosion and Protection, 2012, 32(1):44-47.(in Chinese)
[37］宋高伟,黄燕滨,丁华东,等. 车辆阴极保护效果测试与数值模拟[J]. 腐蚀与防护, 2011, 32(8):646-648.
SONG Gao-wei, HUANG Yan-bin, DING Hua-dong, et al. Testing and numerical simulation of vehicle cathodic protection system[J]. Corrosion & Protection, 2011, 32(8):646-648.(in Chinese)
［38］曲本文,马力,闫永贵,等.海水温度对Al-Zn-Ga-Si低电位牺牲阳极性能的影响［J］.腐蚀科学与防护技术,2015,27(3):259-263.
QU Ben-wen, MA Li, YAN Yong-gui, et al. Influence of temperature on electrochemical perform ance of low driving voltage Al-Zn-Ga-Si anode in seawater ［J］. Corrosion Science and Protection Technology, 2015,27(3):259-263.(in Chinese)
[39］黄燕滨,邵新海,宋高伟，等. 陶瓷涂层性能影响因素及工艺优化研究[J]. 装备环境工程, 2012, 9(1):90-93.
HUANG Yan-bin, SHAO Xin-hai, SONG Gao-wei, et al. Research of influencing factors on performance and process optimization of ceramic coating[J]. Equipment Environmental Engineering, 2012, 9(1):90-93.(in Chinese)
[40］ Wu H, Li D, Tang Y, et al. Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting[J]. Journal of Materials Processing Technology, 2009, 209(18):5886-5891.
[41］ Chao H C, Lu H Y. Optimal composition of zircon fused silica ceramic cores for casting superalloys[J].Journal of the American Ceramic Society,2002,85(4):773-779.
[42］ Gaboury S R, Wood K A. Tailoring coating properties through control of PVDF copolymer phase behaviour[J]. Surface Coatings International Part B Coatings Transactions, 2002, 85(4):295-300.
[43］薛丽莉，许立坤，李庆芬，等. 紧固件防护涂层的制备及耐蚀性能研究[J]. 涂料工业, 2007, 37(7):5-7.
XUE Li-li, XU Li-kun, LI Qing-fen, et al. Preparation of protective coatings for fasteners and its corrosion-resistant performance [J]. Paint and Coating Industry, 2007, 37(7):5-7.(in Chinese)
[44］ Tsybulskaya L S, Gaevskaya T V, Purovskaya O G, et al. Electrochemical deposition of zinc-nickel alloy coatings in a polyligand alkaline bath[J]. Surface and Coatings Technology, 2008, 203(3): 234-239.
[45］边飞龙,黄燕滨,时小军，等. 海洋环境下螺纹紧固件复合防腐技术[J]. 电镀与涂饰, 2010, 29(12):64-66.
BIAN Fei-long, HUANG Yan-bin, SHI Xiao-jun, et al. Composite corrosion protection technique for threaded fasteners in marine environment[J]. Electroplating and Finishing, 2010, 29(12): 64-66. (in Chinese)
[46］杜敏,郭庆银,周传静.碳钢/Ti和碳钢/Ti/海军黄铜在海水中电偶腐蚀的研究[J].中国腐蚀与防护学报,2006,26(5):263-265.
DU Min, GUO Qing-yin, ZHOU Chuan-jing. Carbon steel/Ti and carbon steel/Ti/navy brass accidentally electricity in the seawater corrosion research[J]. Chinese Journal of Corrosion and Protection, 2006, 26(5):263-265.(in Chinese)
[47］戴明安,张英,殷正安,等.流动海水中电偶腐蚀动力学规律[J].腐蚀科学与防护技术,1992,4(3):209-214.
DAI Ming-an, ZHANG Ying, YIN Zheng-an, et al. CLP flowing seawater corrosion kinetics[J]. Automobile Technology and Material, 1992,4(3):209-214.(in Chinese)
[48］ Song G, Johannesson B, Hapugoda S, et al. Galvanic corrosion of magnesium alloy AZ91D in contact with an aluminium alloy, steel and zinc[J]. Corrosion Science, 2004, 46(4):955-977.
[49］黄燕滨,翟海潮,孟昭福，等. 多功能厌氧胶在工程装备中的研究及应用[J]. 新技术新工艺, 2005(9):49-51.
HUANG Yan-bin, ZHAI Hai-chao, MENG Zhao-fu, et al. Study on anaerobic adhesives which used in the engineering equipment[J]. New Technology and New Process, 2005(9):49-51.(in Chinese)
[50］ Ghosh A, Rajeev R S, De S K, et al. Atomic force microscopicstudies on the silicone rubber-fluororubber blend containing ground rubber vulcanizate powder[J]. Journal of Elastomers and Plastics,2006,38(2):119-132.
[51］李柏乐,花庆宝. 浅谈螺纹锁固胶的选型与应用[J].装备制造技术,2014（4）:202-204.
LI Bai-le, HUA Qing-bao.To sketch the selection and application of screw glue[J]. Equipment Manufacturing Technology, 2014（4）: 202-204.(in Chinese)
[52］关洋,徐武彬,王国安. 螺纹锁固胶的防松效果探讨[J]. 机械研究与应用,2013,26(2):170-172.
GUAN Yang, XU Wu-bin, WANG Guo-an.Anti-loosening effect discussion of thread locking glue[J].Mechanical Research and Application,2013,26(2):170-172.(in Chinese)
［53］白攀峰,宋胜利,邹正宇,等.海洋环境中金属的腐蚀与防护［J］.山西化工,2015,35(5):28-29.
BAI Pan-feng, SONG Sheng-li, ZOU Zheng-yu, et al. Corrosion and protection of metals in marine environment ［J］. Shanxi Chemical Industry, 2015,35(5):28-29.(in Chinese)
［54］曹攀,周婷婷,白秀琴,等.深海环境中的材料腐蚀与防护研究进展［J].中国腐蚀与防护学报,2015,35(1):12-20.
CAO Pan, ZHOU Ting-ting, BAI Xiu-qin, et al. Research progress on corrosion and protection in deep-sea environment ［J］. Journal of Chinese Society for Corrosion and Protection, 2015,35(1): 12-20.(in Chinese)

[1]	周伯俊, 于传强，刘志浩，柯冰. 基于高压储能的特种车辆快速起竖技术与验证[J]. 兵工学报, 2022, 43(7): 1488-1497.
[2]	高月光，冯顺山，刘云辉，黄岐. 不同端盖厚度的圆柱形装药壳体破片初速分布[J]. 兵工学报, 2022, 43(7): 1527-1536.
[3]	王野，陈慧岩，汪泰霖，张富毅，王典，司璐璐. 矢量喷水推进两栖车航行姿态的数值及试验分析[J]. 兵工学报, 2022, 43(12): 3172-3185.
[4]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[5]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[6]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[7]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[8]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[9]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[10]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[11]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[12]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[13]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[14]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[15]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.