综合传动装置换挡阀结构参数优化

doi:10.3969/j.issn.1000-1093.2016.04.003

兵工学报 ›› 2016, Vol. 37 ›› Issue (4): 591-597.doi: 10.3969/j.issn.1000-1093.2016.04.003

综合传动装置换挡阀结构参数优化

晋碧瑄¹，翟涌¹，顾宏弢²，张涛¹

（1.北京理工大学机械与车辆学院，北京 100081； 2.中国北方车辆研究所车辆传动重点实验室，北京 100072）

收稿日期:2015-05-26 修回日期:2015-05-26 上线日期:2016-06-20
通讯作者: 晋碧瑄 E-mail:jinbixuan@126.com
作者简介:晋碧瑄（1990—），女，硕士研究生

Optimized Methodfor Shift Valve Used in Integrated Transmission

JIN Bi-xuan¹, ZHAI Yong¹, GU Hong-tao², ZHANG Tao¹

(1.Shool of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China;2.Science and Technology on Vehicle Transmission Laboratory, China North Vehicle Research Institute, Beijing 100072, China）

Received:2015-05-26 Revised:2015-05-26 Online:2016-06-20
Contact: JIN Bi-xuan E-mail:jinbixuan@126.com

摘要/Abstract

摘要： 为提高综合传动装置换挡阀的动态响应特性，对电液换挡控制回路中的换挡阀进行压力、流量特性分析，基于AMESim软件建立其动力学仿真模型。针对换挡阀阀芯直径、弹簧刚度和换挡阀阀口遮盖量这3个关键参数对换挡阀动态响应特性的影响进行了仿真分析。采用遗传算法，对影响换挡阀动态响应特性的结构参数包括弹簧刚度和阀口遮盖量进行优化。通过仿真模型和测试试验结果对比，证明经过优化后换挡阀的动态响应特性得到了改善，验证了此方法的可行性。

关键词: 兵器科学与技术, 换挡阀, 结构参数, 遗传算法, 优化

Abstract: The pressure and flow characteristics of the shift valve in electro-hydraulic control circuit are analyzed to improve the working principle of the shift valve used in the integrated transmission. A dynamics simulation model of shift valve is established based on AMESim software. The effects of spool diameter, spring stiffness and slide lap on the dynamic respond characteristics and performance of shift valve are analyzed through simulation. The structural parameters, including spring stiffness and slide lap, of shift valve are optimized based on genetic algorithm. The simulation results are compared against the test ones. The results show that the simulation analysis with AMESim and the structure optimization with genetic algorithm are instructive, the working principle of the optimized shift valve is improved, as well as the feasibility of the proposed method is verified.

Key words: ordnance science and technology, shift valve, structural parameter, genetic algorithm, optimization

中图分类号:

U463.212

晋碧瑄，翟涌，顾宏弢，张涛. 综合传动装置换挡阀结构参数优化[J]. 兵工学报, 2016, 37(4): 591-597.

JIN Bi-xuan, ZHAI Yong, GU Hong-tao, ZHANG Tao. Optimized Methodfor Shift Valve Used in Integrated Transmission[J]. Acta Armamentarii, 2016, 37(4): 591-597.

参考文献

［1］冀宏,王东升, 刘小平. 滑阀节流槽阀口的流量控制特性[J]. 农业机械学报, 2009, 40(1):198-202.
JI Hong, WANG Dong-sheng, LIU Xiao-ping.Flow control characteristic of the orifice in spool valve with notches[J]. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40(1): 198-202. (in Chinese)
[2］ Haj-Fraj A, Pfeiffer F. Optimization of gear shift operations in automatic transmissions[C]∥6th International Workshop on Advanced Motion Control. Nagoya, Japan:IEEE, 2000:469-473.
[3］ Andersen T O, Hansen M R. Investigation of wear on a pressure compensator spool in a mobile proportional valve[C]∥6th International Conference on Fluid Power Transmission and Control. Hangzhou, Zhejiang, China:Zhejiang University, 2005:420-424.
［4］张英锋，王迎，庞海龙，等. 基于AMESim的大功率自动变速器换挡电磁阀的仿真研究［J］. 汽车工程学报，2014，4（4）：

267- 273.
ZHANG Ying-feng, WANG Ying, PANG Hai-long, et al. Sole- noid valve simulation study for high-power automatic transmission based on AMESim［J］. Chinese Journal of Automotive Engineering, 2014,4(4):267-273. (in Chinese)
[5］孟飞, 陶刚, 张美荣, 等.自动变速器比例电磁阀优化设计与分析[J]. 兵工学报, 2014, 35(5):590-596.
MENG Fei, TAO Gang, ZHANG Mei-rong, et al. Optimization design and analysis of high speed wet proportional solenoid valve[J]. Acta Armamentarii, 2014, 35(5):590-596. (in Chinese)
[6］贾文华, 殷晨波, 曹东辉. 基于AMESim/ MATLAB的液压换向阀的优化设计[J]. 机床与液压, 2013, 41(15):182-183.
JIA Wen-hua, YIN Chen-bo,CAO Dong-hui. Optimization of hydraulic spool valve based on AMESim/MATLAB[J]. Machine Tool & Hydraulics, 2013, 41(15):182-183. (in Chinese)
[7］ Watechagit S, Srinivasan K. Modeling and simulation of a shift hydraulic system for a stepped automatic transmission, 2003-01-0314[R]. Warrendale, PA, US:SAE, 2003.
[8］ Cho B H, Oh J S, Lee W H. Modeling of pulse width modulation pressure control system for automatic transmission, 2002-01-1257[R]. Warrendale, PA, US:SAE, 2002.
[9］庄健, 王孙安. 自调节遗传算法的研究[J].系统仿真学报, 2003, 15(2):281-286.
ZHUANG Jian, WANG Sun-an. Study on self-adjusting genetic algorithm[J]. Journal of System Simulation, 2003, 15(2):281-286.(in Chinese)
[10］周会. 液压滑阀阀口的特性研究[D]. 成都:西南交通大学, 2009.
ZHOU Hui. Research on the characteristics of the orifice of the hydraulic spool valve[D]. Chengdu:Southwest Jiaotong University, 2009.(in Chinese)

[1]	马也，范文慧，常天庆. 基于智能算法的无人集群防御作战方案优化方法[J]. 兵工学报, 2022, 43(6): 1415-1425.
[2]	汤润之, 班利明, 钱乐, 雷争军, 宋卫星. 资源受限条件下车辆维修工序调度优化[J]. 兵工学报, 2021, 42(9): 2032-2039.
[3]	司骥跃，庞兆君，由锰，冯广斌，杜忠华. 空间绳网结构设计及优化方法[J]. 兵工学报, 2021, 42(5): 1065-1073.
[4]	冯睽睽，张发平，王武宏，张文杰，张田会. 基于非支配排序遗传算法的涡轮发动机转子系统装配参数优化[J]. 兵工学报, 2021, 42(5): 1092-1100.
[5]	高子茵，杜明刚，李慎龙，李晋. 基于遗传算法优化和模糊控制动态优化的自动变速器换挡规律设计[J]. 兵工学报, 2021, 42(4): 684-696.
[6]	罗中峰，管小荣，徐诚. 面向弹丸炮口状态的自行火炮结构参数全局灵敏度[J]. 兵工学报, 2021, 42(2): 254-267.
[7]	王少华，吕会强，董原生，张远. 装备伴随抢修任务分配决策方法[J]. 兵工学报, 2021, 42(1): 192-198.
[8]	刘秋，孙晋伟，张华, 胡煦，顾亮. 基于卷积神经网络的路面识别及半主动悬架控制[J]. 兵工学报, 2020, 41(8): 1483-1493.
[9]	叶海潮，范武林，秦国华，林锋，郑许，杨扬. 基于翘曲度阈值约束的铝合金板材热轧工艺优化与实验验证[J]. 兵工学报, 2020, 41(8): 1623-1632.
[10]	杨管金子，李建辰，黄海，国琳娜. 基于最优解析的陀螺现场免转台标校方法[J]. 兵工学报, 2020, 41(3): 577-584.
[11]	赵星宇，白春华，姚箭，孙彬峰. 燃料空气炸药爆轰产物JWL状态方程参数计算[J]. 兵工学报, 2020, 41(10): 1921-1929.
[12]	张富毅，吴钦，赵晓阳，刘影，王国玉. 基于响应面方法的喷水推进器进水流道多目标优化[J]. 兵工学报, 2020, 41(10): 2071-2080.
[13]	宫志华，段鹏伟，刘洋，陈春江，吕海东. 多样本遗传算法在武器外弹道组网试验中的应用[J]. 兵工学报, 2019, 40(7): 1503-1510.
[14]	刘昊，张策，丁文韬. 基于智能对抗进化的联合火力打击任务规划方法[J]. 兵工学报, 2019, 40(6): 1287-1296.
[15]	富威，吴琼，崔运山，刘琪，周超. 舰炮身管的抗振性能优化研究[J]. 兵工学报, 2019, 40(2): 234-242.

综合传动装置换挡阀结构参数优化

Optimized Methodfor Shift Valve Used in Integrated Transmission

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价