侵彻引信计层起爆炸点控制实物模拟实验方法研究

doi:10.3969/j.issn.1000-1093.2014.10.006

兵工学报 ›› 2014, Vol. 35 ›› Issue (10): 1556-1561.doi: 10.3969/j.issn.1000-1093.2014.10.006

侵彻引信计层起爆炸点控制实物模拟实验方法研究

满晓飞，张合，马少杰，王晓锋

(南京理工大学智能弹药技术国防重点学科实验室，江苏南京 210094)

收稿日期:2013-10-13 修回日期:2013-10-13 上线日期:2014-11-28
通讯作者: 满晓飞 E-mail:manxiaofei@163.com
作者简介:满晓飞(1986—)，男，博士研究生
基金资助:
武器装备预先研究项目（51305060203）

Study of Physical Simulation Experiment of Penetration Fuze Layer-count Burst Point Control

MAN Xiao-fei， ZHANG He， MA Shao-jie， WANG Xiao-feng

(ZNDY of Ministerial Key Laboratory, Nanjing University of Science and Technology, Nanjing 210094, Jiangsu，China)

Received:2013-10-13 Revised:2013-10-13 Online:2014-11-28
Contact: MAN Xiao-fei E-mail:manxiaofei@163.com

摘要/Abstract

摘要： 针对硬目标侵彻引信实验室实物模拟实验，提出了利用多次冲击实验机对硬目标侵彻过程进行模拟实验方法的研究。介绍了硬目标侵彻引信的计层数策略，讨论利用冲击过程模拟侵彻过程加速度信号的可行性，设计了模拟实验系统并针对某型号侵彻引信进行计层数起爆模拟实验。通过与靶场试验曲线的对比，验证了该模拟实验方法的可行性，可较全面地检测引信起爆控制算法的准确性，以及引信活动部件动作的可靠性；但冲击峰值较低，冲击间隔较长，需要做进一步的研究和完善。

关键词: 兵器科学与技术, 侵彻引信, 冲击试验, 模拟实验, 计层数

Abstract: A method of using the repeated impact machine to simulate the process of hard target penetration is proposed for the physical simulation experiment of hard target penetration fuze. The layer-count algorithm of hard target penetration fuze is introduced. The feasibility of simulating the penetration acceleration signal by use of the impact process is discussed. A simulation experimental system is designed, and a layer-count detonating experiment is done using a certain type of penetration fuze. The result is compared with shooting range test curve, proving the feasibility of the simulation experimental methods. The accuracy of fuze burst point control method can be comprehensively tested. The reliability of fuze moving parts can be testified. Further research is needed as the shock acceleration peak is low and the shock interval is long.

Key words: ordnance science and technology, penetration fuze, shock experiment, simulation experiment, layer-count

中图分类号:

TJ430.6

满晓飞，张合，马少杰，王晓锋. 侵彻引信计层起爆炸点控制实物模拟实验方法研究[J]. 兵工学报, 2014, 35(10): 1556-1561.

MAN Xiao-fei， ZHANG He， MA Shao-jie， WANG Xiao-feng. Study of Physical Simulation Experiment of Penetration Fuze Layer-count Burst Point Control[J]. Acta Armamentarii, 2014, 35(10): 1556-1561.

参考文献

［1］江增荣,李世才,李向荣.炸点深度对侵爆战斗部毁伤效果影响数值模拟[J].兵工学报, 2010(S1)：28-32.
JIANG Zeng-rong, LI Shi-cai, LI Xiang-rong. Numerical simulation for influence of blast depth on damage effects of penetration-exploding tandem submunition[J]. Acta Armamentarii, 2010(S1):28- 32.（in Chinese）
[2］张志安, 陈荷娟. 硬目标侵彻引信半实物仿真关键技术研究[J]. 计算机仿真, 2008,25（3）:17-20.
ZHANG Zhi-an, CHEN He-juan. Research on the key technology of semi physical simulation of hard target penetration fuze[J]. Computer Simulation, 2008, 25（3）: 17-20.(in Chinese)
[3］康敬欣, 李科杰, 宋萍. 硬目标侵彻引信虚拟试验技术及其应用[J]. 弹箭与制导学报, 2002, 22（4）: 28-30.
KANG Jing-xin, LI Ke-jie, SONG Ping. Hard target penetration fuze virtual test technology and application[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2002, 22（4）: 28-30. (in Chinese)
[4］冯杰, 费元春, 曹俊, 等. 一种导弹引信目标建模与半实物仿真的方法[J]. 红外与激光工程, 2007(S2): 402-406.
FENG Jie, FEI Yuan-chun, CAO Jun, et al. A method of target missile fuze modeling and simulation[J]. Infrared and Laser Engineering,2007(S2):402-406. (in Chinese)
[5］张建新. 侵彻引信炸点控制理论及试验研究[D]. 南京：南京理工大学, 2012.
ZHANG Jian-xin. Theoretical and experimental study on burst point control for penetration fuze[D]. Nanjing:Nanjing University of Science and Technology,2012.(in Chinese)
[6］高越俊. 硬目标侵彻引信测试系统设计[D]. 南京：南京理工大学，2013.
GAO Yue-jun. Design of hard target penetration fuze testing system[D]. Nanjing:Nanjing University of Science and Technology,2013.(in Chinese)
[7］虞青俊, 李玉龙, 金连宝, 等. 侵彻多层混凝土目标弹丸过载特性研究[J]. 探测与控制学报, 2007, 29(1): 13-17.
YU Qing-jun, LI Yu-long, JIN Lian-bao, et al. Study on the overload characteristics of multilayer concrete target penetration projectile[J]. Journal of Detection and Control, 2007, 29(1): 13-17. (in Chinese)

[1]	马孟新，李蓉，牛兰杰. 侵彻引信加速度信号目标特征中干扰叠加程度的评价指标[J]. 兵工学报, 2022, 43(1): 20-28.
[2]	黄莎玲，朱鸿志，程祥利，谢玉斌. 自适应阈值侵彻引信层目标识别算法[J]. 兵工学报, 2020, 41(9): 1762-1771.
[3]	张雄星，邹金龙，王伟，苏思友. 新型磁敏感侵彻计层方法研究[J]. 兵工学报, 2019, 40(11): 2204-2211.
[4]	娄伟鹏，郑长松，李和言，陈建文，张周立，马源. 高速《Symbol》v湿式换挡离合器排油阀临界开启和关闭压力研究[J]. 兵工学报, 2017, 38(9): 1665-1672.
[5]	王宪成，杨绍卿，马宁，赵文柱. 车辆柴油机缸套动载荷磨损计算模型研究[J]. 兵工学报, 2017, 38(9): 1673-1680.
[6]	孙皓泽，常天庆，王全东，孔德鹏，戴文君. 一种基于分层多尺度卷积特征提取的坦克装甲目标图像检测方法[J]. 兵工学报, 2017, 38(9): 1681-1691.
[7]	张玉燕，孙莎莎，王振春，曹海要，战再吉. 高速载流电枢表面瞬态温度场仿真与测量[J]. 兵工学报, 2017, 38(9): 1692-1698.
[8]	李臣明，宦超，石怀龙. 某箱式火箭炮对面目标分布式杀伤最优火力分配[J]. 兵工学报, 2017, 38(9): 1699-1704.
[9]	雷娟棉，张嘉炜，谭朝明. 小攻角下船尾外形对旋转弹丸马格努斯效应影响的数值研究[J]. 兵工学报, 2017, 38(9): 1705-1715.
[10]	李泽，闫晓鹏，栗苹，郝新红，王建涛. 扫频式干扰对调频多普勒引信的干扰机理研究[J]. 兵工学报, 2017, 38(9): 1716-1722.
[11]	张浩为，谢军伟，张昭建，宗彬锋，陈唐军. 基于混合自适应遗传算法的相控阵雷达任务调度[J]. 兵工学报, 2017, 38(9): 1761-1770.
[12]	李茂，侯海量，朱锡，黄晓明，李典，陈长海，胡年明. 结构间隙对芳纶纤维增强复合装甲结构抗侵彻性能的影响[J]. 兵工学报, 2017, 38(9): 1797-1805.
[13]	王鉴, 韩焱, 王黎明, 张丕状, 陈平. 弹丸在膛内运动的回波信号瞬时频率估计方法研究[J]. 兵工学报, 2017, 38(9): 1806-1814.
[14]	刘海鸥，张文胜，徐宜，赵梓烨. 基于核密度估计的履带车辆传动轴载荷谱编制[J]. 兵工学报, 2017, 38(9): 1830-1838.
[15]	姜缪文，闫健卓，陈继民. 基于拓扑优化技术的军用头盔内胆结构三维打印[J]. 兵工学报, 2017, 38(9): 1845-1853.

侵彻引信计层起爆炸点控制实物模拟实验方法研究

Study of Physical Simulation Experiment of Penetration Fuze Layer-count Burst Point Control

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价