[1] 徐明友. 火箭外弹道学[M]. 北京: 兵器工业出版社, 1989: 94-95. XU M Y. External ballistics of rocket[M]. Beijing: Publishing House of Ordnance Industry, 1989:94-95.(in Chinese) [2] 乔自平, 李峻松, 薛钧. 大口径机枪枪管失效规律研究[J].兵工学报, 2015, 36(12): 2231-2240. QIAO Z P, LI J S, XUE J. Research on the performance decay rule of large caliber machinegun barrel [J]. Acta Armamentarii, 2015, 36(12) : 2231-2240. (in Chinese) [3] 张行. 断裂与损伤力学[M].北京: 北京航空航天大学出版社, 2009: 318-359. ZHANG X.Fracture and damage mechanics [M]. Beijing: Beihang University Press, 2009: 318-359. (in Chinese) [4] 刘帮俊, 陈荣刚. 无损检测及其在身管损伤评估中的应用[J]. 兵器装备工程学报, 2018,39(1): 71-75. LIU B J, CHEN R G. Non-destructive testing and its application in the evaluation of gun barrel's damage [J]. Journal of Ordnance Equipment Engineering, 2018, 39(1): 71-75. (in Chinese) [5] CHEN X Y, CHEN Z. Research on the ultrasonic testing of defect for LY12 aluminum alloy based on transmission wave in lamb wave[J]. Journal of Vibroengineering, 2017, 19(3): 1771-1781. [6] 曾志银, 马明迪, 宁变芳, 等. 火炮身管阳线损伤机理分析[J]. 兵工学报, 2014, 35(11): 1736-1742. ZENG Z Y, MA M D, NING B F, et al. Analysis of rifling land damage mechanism of gun barrel [J]. Acta Armamentarii, 2014, 35(11): 1736-1742. (in Chinese) [7] 张喜发, 卢兴华. 火炮烧蚀内弹道学[M].北京: 国防工业出版社, 2001. ZHANG X F, LU X H. Interior ballistics of erosion guns [M]. Beijing: National Defense Industry Press, 2001. (in Chinese) [8] 刘国庆, 徐诚, 丁传俊. 狙击步枪弹/枪相互作用数值研究[J]. 振动与冲击, 2017, 36(19): 1-7. LIU G Q, XU C, DING C J. Numerical calculation on the interaction between bullet and sniper rifle [J]. Journal of Vibration and Shock, 2017, 36(19): 1-7. (in Chinese) [9] 田桂军. 内膛烧蚀磨损及其对内弹道性能影响的研究[D].南京: 南京理工大学, 2003. TIAN G J. Researches on the wear and erosion of bore and its influence to interior ballistic performance [D]. Nanjing: Nanjing University of Science and Technology, 2003. (in Chinese)
[10] 刘雷, 陈运生, 杨国来. 基于接触模型的弹炮耦合问题研究[J]. 兵工学报, 2006, 27(6): 984-987. LIU L, CHEN Y S, YANG G L. A study on the projectile-barrel coupling based on contact model [J]. Acta Armamentarii, 2006,27(6): 984-987. (in Chinese) [11] DING C J, LIU N, ZHANG X Y. A mesh generation method for worn gun barrel and its application in projectile-barrel interaction analysis [J]. Finite Elements in Analysis and Design, 2017, 124(2): 22-32. [12] 冯国铜, 周克栋, 赫雷,等. 复杂射击规范下枪管温度场数值分析与试验研究[J].北京理工大学学报, 2017, 37(10): 1003-1008. FENG G T, ZHOU K D, HE L, et al. Numerical analysis and experimental study of gun barrel's temperature under complicated firing regulations[J]. Transaction of Beijing Institute of Technology, 2017, 37(10): 1003-1008. (in Chinese) [13] JOHNSON G R, COOK W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures [J]. Engineering Fractures Mechanics, 1985, 21(1): 31-48. [14] 沈超, 周克栋, 陆野, 等. 某大口径机枪内膛损伤对弹丸挤进过程的影响研究[J]. 兵工学报, 2018, 39(12): 2320-2329. SHEN C, ZHOU K D, LU Y, et al. Research on the bullet engraving process influenced by the damaged bore of a large caliber machine gun [J]. Acta Armamentarii, 2018, 39(12): 2320-2329. (in Chinese)
第40卷 第4期2019 年4月兵工学报ACTA ARMAMENTARIIVol.40No.4Apr.2019
|