[1] 邓志明, 欧阳光耀, 李育学, 等.内燃机活塞环组密封性能研究[J]. 润滑与密封, 2011, 36(3):60-64. DENG Zhi-ming, OUYANG Guang-yao, LI Yu-xue, et al. Research on sealing performance of internal combustion engine piston ring group[J]. Lubrication Engineering, 2011, 36(3):60-64.(in Chinese) [2] 刘卫平, 王明泉. 差压法检测压力气体泄漏的研究[J]. 机械工程与自动化, 2010, 158(1): 133-135. LIU Wei-ping, WANG Ming-quan. Study on pressure gas leakage detection by differential pressure method[J]. Mechanical Engineering & Automation, 2010, 158(1): 133-135. (in Chinese) [3] 张洪超, 倪计民, 杜倩颖, 等. 车用发动机气缸密封垫的密封性能研究[J]. 内燃机工程, 2011, 32(5):84-92. ZHANG Hong-chao, NI Ji-min, DU Qian-ying, et al. Research on sealing performance of engine cylinder gasket[J]. Chinese Internal Combustion Engine Engineering, 2011, 32(5):84-92. (in Chinese) [4] 邱宗敏, 金宏卫. 气缸压缩压力的测量在发动机故障诊断中的应用[J]. 装备制造技术, 2012(4):73-74. QIU Zong-min, JIN Hong-wei. Application of cylinder compression pressure measurement in engine fault diagnosis[J]. Equipment Remanufacturing Technology, 2012(4):73-74. (in Chinese) [5] Mao J L, Zuo Z X, Lin W, et al. Multi-dimensional scavenging analysis of a free-piston linear alternator based on numerical simulation[J]. Applied Energy, 2011, 88(4):1140-1152. [6] 归柯庭,汪军,王秋颖. 工程流体力学[M]. 北京: 科学出版社,2003. GUI Ke-ting, WANG Jun, WANG Qiu-ying. Engineering fluid dynamics[M]. Beijing: Science Press, 2003. (in Chinese) [7] 袁泉. 柴油机性能监测系统的开发与试验研究[D]. 武汉:武汉理工大学, 2005. YUAN Quan. Development and experimental research on diesel engine performance monitoring system[D]. Wuhan: Wuhan University of Technology, 2005. (in Chinese) [8] 谢静, 白少先. 倾斜椭圆微孔端面上游泵送气体密封流体动压特性[J]. 摩擦学学报, 2017, 37(2):233-239. XIE Jing, BAI Shao-xian. Effect of flexible sealing ring installation on dynamic followability of dry gas seal[J]. Tribology, 2017, 37(2): 233-239. (in Chinese) [9] Meng F M, Wang J X, Xiao K. A study of the influences of particles in the gas flow passage of a piston ring pack on the tribological performances of the piston ring[J]. Journal of Mechanical Engineering Science, 2010, 224(1): 201-215.
[10] Stedman M, Lindsey K. Limits of surface measurement by stylus instruments[J]. Surface Measurement and Characterization, 1988, 1009(56):56-61. [11] 任晓, 吴承伟, 周平. 粗糙表面的气体密封性能研究[J]. 机械工程学报, 2010, 46(16):176-181. REN Xiao, WU Cheng-wei, ZHOU Ping. Gas sealing perfor- mance study of rough surface[J]. Journal of Mechanical Engineering, 2010, 46(16):176-181.(in Chinese) [12] 孟祥慧, 谢友柏, 戴旭东. 典型磨损情况下的内燃机性能退化预测[J]. 摩擦学学报, 2009, 29(5): 469-474. MENG Xiang-hui, XIE You-bai, DAI Xu-dong. Performance degradation prediction of internal combustion engine under typical wear[J]. Tribology, 2009, 29(5): 469-474. (in Chinese) [13] 和穆. 高原坦克动力装置状态监测与寿命预测方法研究[D]. 北京:装甲兵工程学院, 2012. HE Mu. Research on condition monitoring and life prediction of tank power plant in plateau[D]. Beijing: Academy of Armored Force Engineering, 2012. (in Chinese) [14] 袁晨桓, 冯慧华, 王梦秋, 等. 自由活塞发动机活塞环密封特性研究[J]. 内燃机工程, 2015, 36(5): 151-156. YUAN Chen-huan, FENG Hui-hua, WANG Meng-qiu, et al. Research on sealing characteristics of piston ring in free piston engine[J]. Chinese Internal Combustion Engine Engineering, 2015, 36(5): 151-156. (in Chinese) [15] Huang M H, Pan Q, Li Y B, et al. Theoretical investigation of the viscous damping coefficient of hydraulic actuators[J]. Chinese Journal of Mechanical Engineering, 2017, 30(4):829-842. [16] 解茂昭. 内燃机计算燃烧学[M]. 大连: 大连理工大学出版社, 2005. XIE Mao-zhao. Combustion calculation internal combustion engine[M]. Dalian: Dalian University of Technology Press, 2005. (in Chinese) [17] 毕玉华. 柴油机缸套力学特性及变形研究[D]. 昆明:昆明理工大学, 2011. BI Yu-hua. Study on mechanical characteristics and deformation of diesel cylinder liner[D]. Kunming: Kunming University of Science and Technology, 2011. (in Chinese)
第39卷 第10期2018 年10月兵工学报ACTA ARMAMENTARIIVol.39No.10Oct.2018
|