Welcome to Acta Armamentarii ! Today is

Acta Armamentarii ›› 2019, Vol. 40 ›› Issue (8): 1562-1571.doi: 10.3969/j.issn.1000-1093.2019.08.002

• Paper • Previous Articles     Next Articles

Construction for Online Observer Based on Exhaust Gas Temperature Dynamic Model

LI Jiawei1, CUI Tao1, LIU Yuhang2, SHI Shuainan3, SUN Qiang1   

  1. (1.School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China; 2.Beijing Institute of Space Launch Technology, Beijing 100076, China; 3.Hebei Huabei Diesel Engine Co., Ltd., Shijiazhuang 050081, Hebei, China)
  • Received:2018-10-15 Revised:2018-10-15 Online:2019-10-15

Abstract: As one of the most core components for diesel emission control and monitoring, the exhaust temperature sensor is widely used for electronic control of diesel engine. In order to satisfy the needs of on-line fault diagnosis and fault-tolerant control of rear temperature sensors for the two-stage turbocharging system, an engine is used to establish a dynamic model of exhaust gas temperature which reflects the combustion conditions of cylinder, and the air-fuel ratio, engine speed, and altitude are used to calibrate the exhaust gas temperature influencing factors virtually. An on-line exhaust gas temperature observer including first-order lagging links was constructed, and the effectivenesses of observer at steady state and dynamic situation were verified in typical operating conditions. The result shows that the on-line observer can be used for on-line temperature estimation, which has a high calculation accuracy and dynamic response performance with the steady state accuracy of ±3%, the dynamic accuracy of ±8%, and the response time of less than 3 s. Key

Key words: turbochargeddieselengine, exhaustgastemperature, dynamicmodelofexhaustgastemperature, onlineobserver, faultdiagnosis

CLC Number: