[1] Guo Z W, Yuan C Q, Liu P, et al. Study on influence of cylinder liner surface texture on lubrication performance for cylinder liner piston ring components [J]. Tribology Letters, 2013, 51(1): 9-23. [2] 苗嘉智, 郭智威, 袁成清. 内燃机缸套-活塞环微织构设计与研究进展[J]. 润滑与密封, 2017, 42(2): 124-131. MIAO Jia-zhi, GUO Zhi-wei, YUAN Cheng-qing. Research progress on micro-texture of cylinder liner-piston ring in internal combustion engine[J]. Lubrication Engineering, 2017, 42(2): 124-131. (in Chinese) [3] 汪家道, 陈大融, 孔宪梅. 规则凹坑表面形貌润滑研究[J]. 摩擦学学报, 2003, 23(l): 52-55. WANG Jia-dao, CHEN Da-rong, KONG Xian-mei.Study on lubrication of regular concave surface[J]. Tribology, 2003, 23(1): 52-55.(in Chinese) [4] 占剑,杨明江.YAG激光微坑刻蚀对缸套-活塞环摩擦磨损性能的影响[J].内燃机学报, 2011, 29(1): 84-89. ZHAN Jian, YANG Ming-jiang. Friction and wear properties of cylinder liner and piston ring with different YAG laser honing micro-pits distributions [J]. Transactions of CISCE, 2011, 29(1): 84-89. (in Chinese) [5] 刘鹏, 袁成清, 郭智威. 缸套内表面微观织构对缸套-活塞环润滑性能的影响[J]. 兵工学报, 2012, 33(2): 149-154. LIU Peng, YUAN Cheng-qing, GUO Zhi-wei. Effect of liner micro-geometrical structure on vibration and lubricating capability of cylinder liner-piston ring[J]. Acta Armamentarii, 2012, 33(2): 149-154. (in Chinese) [6] 尹必峰, 钱晏强, 李晓东,等. 柴油机缸套表面微沟槽织构润滑性能仿真分析[J]. 中国机械工程, 2013, 24(5): 644-649. YIN Bi-feng, QIAN Yan-qiang, LI Xiao-dong, et al. Simulation and analysis on lubrication performance of surface micro-groove texturing on cylinder liner in diesel engine[J]. China Mechanical Engineering, 2013, 24(5): 644-649. (in Chinese) [7] 娄朝辉. 缸套-活塞环表面织构对其摩擦学性能的影响规律研究[D].武汉:武汉理工大学,2015. LOU Chao-hui. Study on the influence of tribological properties of the surface textured cylinder liner-piston rings[D]. Wuhan:Wuhan University of Technology, 2015. (in Chinese) [8] 苗嘉智, 郭智威, 袁成清. 表面织构对内燃机缸套-活塞环系统摩擦性能的影响[J]. 摩擦学学报, 2017,37(4): 465-471. MIAO Jia-zhi, GUO Zhi-wei, YUAN Cheng-qing. Effect of textured surface on the friction performance of cylinder liner-piston ring system in theinternal combustion engine[J]. Tribology,2017,37(4): 465-471. (in Chinese) [9] Lawrence K D, Ramamoorthy B. Multi-surface topography targeted plateau honing for the processing of cylinder liner surfaces of automotive engines[J]. Applied Surface Science, 2016, 365(1): 19-30.
[10] Grabon W, Koszela W, Pawelu P, et al. Improving tribological behavior of piston ring-cylinder liner frictional pair by liner surface texturing [J]. Tribology International, 2013, 61: 102-108. [11] 王宪成, 张晶, 孙耀文,等. 发动机缸套-活塞环磨损数值计算研究[J]. 兵工学报, 2010, 31(8): 1014-1018. WANG Xian-cheng, ZHANG Jing, SUN Yao-wen, et al. Numerical calculation for wear of cylinder liner and piston ring[J]. Acta Armamentarii, 2010, 31(8): 1014-1018. (in Chinese) [12] 卢男. 铸造表面粗糙度三维评价体系建立及检测方法研究[D]. 哈尔滨:哈尔滨理工大学,2014. LU Nan. The three-dimension evaluation system establishment and detection method research of casting surface roughness[D]. Harbin: Harbin University of Science and Technology, 2014. (in Chinese) [13] 刘薄. 接触电阻法在润滑状态测试中的应用研究[D]. 大连: 大连理工大学, 2012. LIU Bo. Contact resistance method apply research in lubricating state testing[D]. Dalian: Dalian University of Technology, 2012. (in Chinese)
第39卷 第2期2018 年2月兵工学报ACTA ARMAMENTARIIVol.39No.2Feb.2018
|