Simulation and Sensitivity Analysis of Collaborative Developing Process of Weaponry Based on Quality Feedback

doi:10.3969/j.issn.1000-1093.2015.10.023

Abstract

Abstract: Among three performance indicators, such as time of duration, cost and quality, of a project, the quality is very important. To make the completion quality of the subtask achieve the prospective quality indicator, the process of rework is described by means of quality-feedback based on design structure matrix. Monte Carlo simulation technique is applied to obtain the total cost and time of the project. In this way, the time of duration, cost and quality are linked together to study the influence of quality on schedule risk and cost risk of the project through the analysis of the sensitivity. The research results show that the sensitivity of airframe structure design task is the highest in the process of advanced development of a certain military aircraft, so the project manager can give priority to control the process risk by coordinating the allocation of resources.

Key words: ordnance science and technology, design structure matrix, task overlapping, vector of quality standard, Monte Carlo, sensitivity

CLC Number:

TP391.9

YIN Wei-wei, JIANG Ju, XIN Jun-jie. Simulation and Sensitivity Analysis of Collaborative Developing Process of Weaponry Based on Quality Feedback[J]. Acta Armamentarii, 2015, 36(10): 1991-1999.

References

［1］李金林. 武器装备研制项目风险管理［M］.哈尔滨：哈尔滨工程大学出版社, 2010.
LI Jin-lin. Weapon equipment development project risk management ［M］.Harbin：Harbin Engineering University Press,2010.（in Chinese）
［2］许晓燕, 赵武, 姜迎春, 等. 基于过程的协同技术在产品质量管理中的应用［J］. 工业工程, 2007, 10(2): 97-101.
XU Xiao-yan, Zhao Wu, JIANG Ying-chun, et al. Application of cooperation technology based on process in product quality management ［J］. Industrial Engineering Journal, 2007, 10(2): 97-101.（in Chinese）
［3］巴延廷. 基于PERT的工程进度风险分析研究［D］. 大连：大连理工大学, 2010.
BA Ting-ting. The research on Project risk analysis based on PERT ［D］. Dalian：Dalian University of Technology, 2010.（in Chinese）
［4］ Shekar B, Venkataram R, Satish B M. Managing complexity in aircraft design using design structure matrix［J］. Concurrent Engineering, 2011: 1063293X11426461.
［5］ Browning T R. Applying the design structure matrix to system decomposition and integration problems: a review and new directions［J］. IEEE Transactions on Engineering Management， 2001, 48(3): 292-306.
［6］施国强, 李伯虎, 柴旭东. 基于设计结构矩阵的复杂产品开发项目规划模型［J］. 计算机集成制造系统, 2008, 13(11): 2105-2109.
SHI Guo-qiang, LI Bo-hu, CHAI Xu-dong. DSM-based modeling of project scheduling for complex product development ［J］. Computer Integrated Manufacturing Systems, 2008, 13(11): 2105-2109.（in Chinese）
［7］杨青, 黄建美. 基于活动重叠的 DSM 项目时间计算及排序优化［J］. 系统工程理论与实践, 2011, 31(3): 496-504.
YANG Qing, HUANG Jian-mei. Project calculation and optimization based on DSM activities overlapping ［J］. System Engineering-Theory & Practice, 2011, 31(3): 496-504.（in Chinese）
［8］张汉鹏, 邱菀华. 基于DSM 优化的产品开发两因素风险建模及仿真［J］. 北京航空航天大学学报, 2007, 33(5): 627-630.
ZHANG Han-peng, QIU Wan-hua. Product development two-factor risk model and simulation based on DSM ［J］. Journal of Beijing University of Aeronautics and Astronautics, 2007, 33(5): 627-630.（in Chinese）
［9］辛君捷. 基于设计结构矩阵的航空武器装备研制过程风险分析与智能优化［D］. 南京：南京航空航天大学, 2013.
XIN Jun-jie. Research of risk analysis and intelligent optimizing of air-weapon developing process based on design structure matrix ［D］. Nanjing：Nanjing University of Aeronautics and Astronautics, 2013.（in Chinese）
［10］ Steward D V. The design structure system-a method for managing the design of complex systems［J］. IEEE transactions on Engineering Management, 1981, 28(3): 71-74.
［11］赵振宇, 游维扬, 吕乾雷. 基于遗传算法和蒙特卡洛模拟的并行工程设计工序优化［J］. 土木工程学报, 2009(2): 139-144.
ZHAO Zhen-yu, YOU Wei-yang, LYU Qian-lei.Design process sequencing optimization of concurrent engineering projects based on genetic algorithm and Monte Carlo simulation ［J］. China Civil Engineering Journal, 2009(2): 139-144.（in Chinese）
［12］郑唯唯. 过程质量控制智能化体系与方法研究［D］. 西安：西北工业大学, 2006.
ZHENG Wei-wei. Reseach on the system and methods of intelligent process quality control ［D］. Xi'an：Northwestern Polytechnical University, 2006.（in Chinese）
［13］胡寿松. 自动控制原理［M］.修订本.北京：科学出版社，2008.
HU Shou-song. Automatic control theory ［M］. Revised ed.Beijing:Science Press，2008.（in Chinese）
［14］宋淳江. 基于设计结构矩阵的复杂产品系统伙伴选择研究［D］. 杭州：浙江大学, 2011.
SONG Chun-jiang. A study based on design structure matrix for partners selection of complex ［D］. Hangzhou：Zhengjiang University, 2011.（in Chinese）
［15］陆凌云. 基于仿真实验的灵敏度分析方法及工具研究［D］. 哈尔滨：哈尔滨工业大学, 2013.
LU Ling-yun. Research on sensitivity analysis methods and tool based on simulation experients ［D］. Harbin：Harbin Institute of Technology, 2013.（in Chinese）
［16］徐哲, 贾子君. 基于图示评审技术多反馈仿真的武器装备技术风险评估［J］. 计算机集成制造系统, 2010, 16(3): 636- 642.
XU Zhe, Jia Zi-jun. Assessment of technical risk for weapon system development project based on GERT simulation including multi-branch feedback［J］. Computer Integrated Manufacturing Systems, 2010, 16(3): 636-642.（in Chinese）

[1]	LI Qiang, CHEN Ling, GAN Huaiyin, ZHU Yongchen, HE Weidong. Electrostatic Spraying Preparation and Performance of Nanocomposite Energetic Material RDX@NGEC [J]. Acta Armamentarii, 2023, 44(7): 1985-1992.
[2]	WAN Ziping, TAN Ruoyu, ZHENG Jieji, REN Guang'an, XIE Xin, FAN Dapeng. Efficient Design Method of Multi-condition and Static and Dynamic Reinforced Wall Structure for Modular Base of Weapon Station [J]. Acta Armamentarii, 2023, 44(2): 577-590.
[3]	LI Meng, WU Haijun, DONG Heng, REN Guang, ZHANG Peng, HUANG Fenglei. Machine Learning-based Models for Predicting the Penetration Depth of Concrete [J]. Acta Armamentarii, 2023, 44(12): 3771-3782.
[4]	WEI Wei, ZHANG Jingwen, CHANG Sijiang, WANG Haosheng, WANG Jianzhong. Global Sensitivity Analysis of Bullet's Angular Velocity Based on Sobol and EFAST Method [J]. Acta Armamentarii, 2022, 43(9): 2408-2416.
[5]	SHI Shuzheng, GENG Wenping, LIU Yong, BI Kaixi, LI Fen, CHOU Xiujian. Piezoelectric MEMS Accelerometer With d₃₁ Mode Cantilever Structure [J]. Acta Armamentarii, 2022, 43(8): 1998-2006.
[6]	LI Lei, WANG Yanwei, DANG Li, WANG Huisi, DU Fang, TAO Bowen, HU Xiang, ZHOU Shuiping, GU Jian. Hygroscopic Properties of Ammonium Dinitroamide-based High Energy Propellant [J]. Acta Armamentarii, 2022, 43(7): 1614-1619.
[7]	WANG Fan, GUO Weiguo, WU Qian, GAO Meng. Calibration Method for Sensitivity Coefficient of High-temperature Strain Gauges at High Strain Rate [J]. Acta Armamentarii, 2022, 43(4): 899-909.
[8]	LIU Chang, WANG Jiang, FAN Shipeng, LI Ling, LIN Defu. BP Neural Network-Based Adaptive Biased Proportional Navigation Guidance Law [J]. Acta Armamentarii, 2022, 43(11): 2798-2809.
[9]	LIU Chun, OU Zhuocheng, DUAN Zhuoping, HUANG Fenglei. Hot Spot Temperature Resulting from Elliptical Void Collapse in PBX under Dynamic Loading and Its Semi-empirical Analytical Expression [J]. Acta Armamentarii, 2022, 43(1): 57-68.
[10]	DANG Quanyong, GE Yanxin, GAO Yubo. Dynamic Mechanical Properties of Al₂O₃/SiC Composite Ceramic Subjected to Impact Loading [J]. Acta Armamentarii, 2022, 43(1): 175-180.
[11]	NING Zixuan, WANG Lin, CHENG Xingwang, CHENG Huanwu, LIU Anjin, XU Xuefeng, ZHOU Zhe, ZHANG Binbin. Dynamic Response Behaviors of Ti-6321 Titanium Alloys with Different Microstructures under Split Hopkinson Pressure BarLoading [J]. Acta Armamentarii, 2021, 42(4): 862-870.
[12]	LUO Zhongfeng, GUAN Xiaorong, XU Cheng. Global Sensitivity Analysis of a Self-propelled Gun's Structural Parameters for Position and Attitude of Projectile at Muzzle [J]. Acta Armamentarii, 2021, 42(2): 254-267.
[13]	CHEN Pengfei, HE Peng, YU Tailong, LIU Qiaoling. An Analysis Method for Nonlinear Structural Reliability Based on Gradient Search Method [J]. Acta Armamentarii, 2021, 42(1): 175-184.
[14]	LIN Tong， QIAN Linfang， FU Jiawei， WANG Mingming. Parameter Identification and Sensitivity analysis of Gun Elevating Equilibrator [J]. Acta Armamentarii, 2020, 41(9): 1736-1744.
[15]	HOU Yufei， XU Jinsheng， ZHOU Changsheng， CHEN Xiong， LI Hongwen. Comparation of Solid Propellant Micromodels with and without Damage at Initial Particle/matrix Interface [J]. Acta Armamentarii, 2020, 41(9): 1800-1808.