Researchon the Calibration Method for Gear shifting of Automatic Transmission

doi:10.3969/j.issn.1000-1093.2012.02.003

Abstract

Abstract: The development process of electronic automatic transmission control system includes hardware development, software development and calibration. Calibration is the key step to implement control strategy and optimize control quality. An open loop control strategy for 1-2 shifting process was determined for the Allison 2000 transmission. The control pressure characteristics of on-coming clutch and off-going clutch were considered by the control strategy. By analyzing the control parameters, the calibration method and calibration procedure for gear shifting were proposed. The optimization object of the calibration method is to reduce the shift jerk with an acceptable shift time. The calibration method and calibration procedure were verified by the 1-2 upshift experimental study. The experimental study was carried out on the test bench under different load conditions. The experimental results show that superior shift quality is achieved following the calibration method and calibration procedure.

Key words: mechanics, automatic transmission, control strategy, calibration method

CLC Number:

U463.22

WAN Guo-qiang, HUANG Ying, ZHANG Fu-jun, LI Qian, ZUO Zhe. Researchon the Calibration Method for Gear shifting of Automatic Transmission[J]. Acta Armamentarii, 2012, 33(2): 142-148.

References

［1］ Anna T, Govindswamy K, Wolter, et al. Aspects of shift quality with emphasis on powertrain integration and vehicle sensitivity[C]∥Traverse: SAE 2005 Noise and Vibration World Conference and Exhibition, 2005.
[2] Scherer H, Bek M and Kilian S. ZF new 8-speed automatic transmission 8HP70 - basic design and hybridization[C]∥Detroit: SAE World Congress and Exhibition, 2009.
[3] Schang M, Whitton M, Webert D, et al. Gen2 GF6 transmission hardware and controls updates［C］∥Detroit: SAE World Congress and Exhibition, 2011.
[4] Toshimichi M, Tatsuya O, Hiroshi K, et al. Smooth gear shift control technology for clutch-to-clutch shifting [C]∥Detroit: International Congress and Exposition, 1999.
[5] Shushan B, Robert L M, Todd S, et al. Development of a new clutch-to-clutch shift control technology [C]∥Detroit: SAE 2002 World Congress and Exhibition, 2002.
[6] Albert Y, Pramod K, Kumar H. Randomized algorithms for open-loop control of clutch-to-clutch transmissions[J]. Transactions of ASME, 1999, 121(3):508-517.
[7] John E. M, Steven P. M, Matthew D. W, et al. Clutch-to-Clutch Transmission Control Strategy [C]∥Detroit: 2007 World Congress, 2007.
[8] Wentao S, Huiyan C. Research on control strategy of shifting progress [C]∥Shanghai: 2008 SAE International Powertrains, Fuels and Lubricants Congress, 2008.
[9] 李骞. Clutch-to-clutch自动变速器换挡控制策略及实验研究 [D]. 北京: 北京理工大学, 2010: 12-14.
LI Qian. The research of shift strategy and experiment study on clutch-to-clutch automatic transmission [D]. Beijing: Beijing Institute of Technology, 2010: 12-14. (in Chinese)
[10] Shushan B, Daniel B, Don D, et al. Integrated powertrain control［C］∥Detroit: SAE World Congress and Exhibition, 2010.
[11] Gao B, Chen H, Sanada K, et al. Design of clutch-slip controller for automatic transmission using backstepping[J]. IEEE/ASME Transactions on Mechatronics, 2011, 16: 498-508.
[12] 余志生. 汽车理论[M]. 北京：机械工业出版社, 2006: 7-18.
YU Zhi-sheng. Automobile theory[M]. Beijing: China Machine Press, 2006: 7-18. (in Chinese)

[1]	ZHANG Jianwei, WU Ziqi, ZHANG Fengchao, XING Chengcheng, MENG Fanxing. Study on Similarity and Equivalent Design Method of Steel Plate Targets with Different Materials Based on ModifiedCompensation Model [J]. Acta Armamentarii, 2024, 45(4): 1297-1310.
[2]	YU Wenjun, CHEN Shengyun, DENG Shuxin, YU Bingbing, JIN Dongyan. Numerical Simulation of the Propagation Law of Explosion Shock Wave in Turning Tunnel [J]. Acta Armamentarii, 2023, 44(S1): 180-188.
[3]	LI Yongyao, JIANG Lei, LIU Yufei, SUN Zeyuan, ZHENG Dongdong. A Review of Stable Grasping Methods for Humanoid Dexterous Hands [J]. Acta Armamentarii, 2023, 44(11): 3237-3252.
[4]	CHENG Yong, WANG Yaping, CAO Jie, WANG Xinrui. Human Biomechanics in Prone Position Shooting without Support [J]. Acta Armamentarii, 2022, 43(9): 2283-2290.
[5]	YAO Xiongliang, XIONG Banghu, WANG Zhikai, YANG Nana, ZHANG Wenqi, WAN Zechen. Characteristics of Underwater Explosion of the Shock Wave Loads Transfer in the Gas Turbine Structure [J]. Acta Armamentarii, 2022, 43(9): 2367-2378.
[6]	SONG Shuizhou, REN Huilan, NING Jianguo. Acoustic Emission Parameters in the Damage Process of Steel Fiber Reinforced Concrete under Mixed Loading [J]. Acta Armamentarii, 2022, 43(8): 1881-1891.
[7]	JIA Qiming， JIANG Yi， YANG Ying， ZHAO Zixi， WANG Zhihao. A New Type of Controllable Thrust Vertical Launcher and its Interior Ballistic Law [J]. Acta Armamentarii, 2022, 43(7): 1596-1605.
[8]	XU Haibin, YANG Jun, WU Ke, CHEN Bo, SUI Yaguang, WANG Dengwang. Simultaneous Initiation of Light-Initiated Explosive Silver Acetylide-Silver Nitrate [J]. Acta Armamentarii, 2022, 43(11): 2791-2797.
[9]	CAI Xuanming， ZHANG Wei， XU Peng， GAO Yubo， FAN Zhiqiang. Prediction Model of Mechanics Response of Warhead Charge under One-dimensional Stress Dynamic Loading [J]. Acta Armamentarii, 2019, 40(4): 762-768.
[10]	LIANG Zhongchao， WANG Yongfu. Driving Algorithm for Replicating Linear Acceleration of Manned Lunar Rover on Moon under Earth Gravity [J]. Acta Armamentarii, 2019, 40(3): 641-650.
[11]	WANG Yan-pei, JIANG Qi-fan, LI Yu-long. Dynamic Mechanical Behaviors of a Short-glass-fiber Reinforced Polyamide in Hopkinson Bar Test [J]. Acta Armamentarii, 2018, 39(1): 161-169.
[12]	RAN Chun， CHEN Peng-wan, LI Ling, ZHANG Wang-feng. Experimental Research on Dynamic Mechanical Behavior of TC18 Titanium Alloy under Medium and High Strain Rates [J]. Acta Armamentarii, 2017, 38(9): 1723-1728.
[13]	CHEN Hao-yu, HONG Ren-kai, CHEN Yong-tao, ZHANG Shi-wen, REN Guo-wu, MO Jun-jie. Mini Momentum Probe Technique for Diagnosis of Micro-spall Fracture of Material [J]. Acta Armamentarii, 2017, 38(9): 1729-1735.
[14]	TANG Ting, ZHOU Jian-nan. Study of Anti-blasting Ability of Damaged Underground Arch Structure after Earthquake [J]. Acta Armamentarii, 2017, 38(9): 1736-1744.
[15]	WANG Zong-lian, REN Hui-lan, NING Jian-guo. Identification of Damage Modes of Concrete under Compressive Loading Based on Wavelet Transform [J]. Acta Armamentarii, 2017, 38(9): 1745-1753.