Welcome to Acta Armamentarii ! Today is Share:

Acta Armamentarii ›› 2022, Vol. 43 ›› Issue (11): 2791-2797.doi: 10.12382/bgxb.2021.0611

• Paper • Previous Articles     Next Articles

Simultaneous Initiation of Light-Initiated Explosive Silver Acetylide-Silver Nitrate

XU Haibin, YANG Jun, WU Ke, CHEN Bo, SUI Yaguang, WANG Dengwang   

  1. (Northwest Institute of Nuclear Technology, Xi'an 710024, Shaanxi, China)
  • Online:2022-07-21

Abstract: An experimental simulation technique using light-initiated explosive is considered as a high-fidelity technique to study the structural effect caused by X-ray induced blowoff impulse loading. To realize nearly simultaneous impulse loading with very short duration over large areas of the light-initiated explosive, silver acetylide-silver nitrite(SASN), it is critical to develop a technology to initiate sprayed coatings of light-initiated explosive almost simultaneously. Using coated optical fiber probes, simultaneous initiation of sprayed layers by pulse flash produced by electrical explosion of tungsten wire is characterized and proven to be accurate. The results show that the detonation times of a sprayed-deposited explosive can be obtained precisely by the probes. The higher the illuminance, the better the synchronicity of the initiation and the shorter the delay period of the light initiation. When the number of tungsten wires is increased from one to two, the simultaneity of light initiation is significantly improved that the minimum time gap for ignition between adjacent measured points is reduced from 0.6 μs to 0.1 μs when the delay time is decreased from 33.7~57.7 μs to 13.0~20.4 μs. The conclusion indicates that it is possible to achieve high simultaneity of light initiation over a large coverage of light-sensitive explosive.

Key words: mechanicsofexplosion, light-initiatedexplosive, silveracetylide-silvernitrate, simultaneousinitiation, electricalexplosion, lightinitiation

CLC Number: