A Simulation Investigation on Grinding Forces in Ultrasonic Assisted Grinding of Ceramics with Single Abrasive Grain byUsing SPH Method

doi:10.3969/j.issn.1000-1093.2015.06.015

Abstract

Abstract: In order to investigate the influence of axial ultrasonic vibration on the grinding force during ultrasonic assisted grinding (UAG) of SiC and Al₂O₃ ceramics, the grinding forces of UAG SiC and Al₂O₃ ceramics with single diamond abrasive grain are simulated by using smoothed particle hydrodynamic (SPH) method. In the simulation，the average undeformed chip thickness is set as the depth of cut. It is found that the average undeformed chip thickness decreases with the increase in ultrasonic amplitude and the decrease in abrasive velocity. The simulation results of grinding forces show that the assistance of axial ultrasonic vibration can effectively reduce the grinding forces，and the higher ultrasonic amplitude has a positive effect on the decrease in grinding forces compared with that during conventional grinding. Under the same grinding parameters，the grinding forces in the grinding of SiC ceramics are larger than those in the grinding of Al₂O₃ ceramics.

Key words: manufaturing technology and equipment, ultrasonically assisted grinding, undeformed chip thickness, smoothed particle hydrodynamic method, SiC ceramics, Al₂O₃ ceramics

CLC Number:

TG580.1⁺3

MI Zhao-yang， LIANG Zhi-qiang， WANG Xi-bin， ZHOU Tian-feng， ZHAO Wen-xiang， TIAN Meng. A Simulation Investigation on Grinding Forces in Ultrasonic Assisted Grinding of Ceramics with Single Abrasive Grain byUsing SPH Method[J]. Acta Armamentarii, 2015, 36(6): 1067-1073.

References

［1］ Ishihara M，Baba S，Takahashi T，et al. Fundamental thermo mechanical properties of SiC-based structural ceramics subjected to high energy particle irradiations [J]. Fusion Engineering and Design，2000，51/52：117-121.
[2] 陈维平，韩孟岩，杨少锋.Al₂O₃陶瓷复合材料的研究进展[J].材料工程，2011，21（3）：91-96.
CHEN Wei-ping，HAN Meng-yan，YANG Shao-feng. Research progress of Al₂O₃ ceramic composites [J]. Journal of Materials Engineering, 2011，21(3)：91-96. (in Chinese)
[3] Saito T，Kawamoto H，Yamamoto T，et al. Lattice strain and dislocations in polished surfaces on sapphire [J]. Journal of the American Ceramic Society，2005，88(8)：2277-2285.
[4] 周志雄，毛聪，周德旺，等.平面磨削温度及其对表面质量影响的实验研究[J].中国机械工程，2008，19(8)：980-984.
ZHOU Zhi-xiong，MAO Cong，ZHOU De-wang，et al. Experimental investigation of grinding temperature and its effects on surface quality in surface grinding [J]. China Mechanical Engineering，2008，19(8)：980-984. (in Chinese)
[5] Liang Z，Wu Y，Wang X，et al. A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining [J]. International Journal of Machine Tools and Manufacture，2010，50(8)：728-736.
[6] Tawakoli T，Azarhoushang B，Mohammad R. Ultrasonic assisted dry grinding of 42CrMo4 [J]. The International Journal of Advanced Manufacturing Technology，2009，42(9/10)：883-891.
[7] Uhlmann E，Spur G. Surface formation in creep feed grinding of advanced ceramics with and without ultrasonic assistance [J]. CIRP Annals-Manufacturing Technology，1998，47(1)：249-252.
[8] 徐世龙，林建忠，杨玉廷.基于SPH方法的磨削机理仿真研究[J].制造技术与机床，2012(12)：136-139.
XU Shi-long，LIN Jian-zhong，YANG Yu-ting. Simulation study of grinding mechanism based on SPH [J]. Manufacturing Technology & Machine Tool，2012(12)：136-139. (in Chinese)
[9] Lucy L. A numerical approach to the testing of the fission hypothesis [J]. Astronomical Journal，1977，82（12）：1013-1024.
[10] Gingold R，Monaghan J. Smoothed particle hydrodynamics：theory and application to non-spherical stars [J]. Monthly Notices of the Royal Astronomical Society，1977，181（3）：375-389.
[11] Monaghan J. An introduction to SPH [J]. Computer Physics Communications，1988，48(1)：89-96.
[12] Li W，Yin S，Wang X. Numerical investigations of the effect of oblique impact on particle deformation in cold spraying by the SPH method [J]. Applied Surface Science，2010，256(12)：3725-3734.
[13] Guo X，Wei Y，Jin J，et al. A numerical model for optical glass cutting based on SPH method [J]. The International Journal of Advanced Manufacturing Technology，2013，68（5/6/7/8）：1277- 1283.
[14] Limido J，Espinosa C，Salaun M，et al. SPH method applied to high speed cutting modelling [J]. International Journal of Mechanical Sciences，2007，49(7)：898-908.
[15] 宿崇，施志辉，刘元伟.陶瓷CBN砂轮地貌建模与磨削仿真[J]. 中国机械工程，2012，23(14)：1742-1745.
SU Chong，SHI Zhi-hui，LIU Yuan-wei. Topography modeling and grinding simulation of vitrified bonded CBN wheel [J]. China Mechanical Engineering，2012，23(14)：1742-1745. (in Chinese)
[16] Wu Y，Nomura M，Feng Z，et al. Modeling of grinding force in constant-depth-of-cut ultrasonically assisted grinding [J]. Materials Science Forum，2004，471/472：101-106.
[17] Malkin S. Grinding technology：theory and applications of machining with abrasives [M]. Los Angeles, US: Society of Manufacturing Engineers，1989：35-45.
[18] 任敬心，康仁科，史兴宽. 难加工材料的磨削[M]. 北京：国防工业出版社，1999：20-22.
REN Jing-xin，KANG Ren-ke，SHI Xing-kuan. Grinding of difficult-to-cut materials[M]. Beijing：National Defense Industry Press，1999：20-22. (in Chinese)
[19] Cronin D，Bui K，Kaufmann C，et al. Implementation and validation of the Johnson-Holmquist ceramic material model in LS-Dyna[C]∥4th European LS-DYNA Users Conference. Ulm, Germany：ARUP，2003.

[1]	KONG Ling-fei, NIU Han, HOU Xiao-li, LIN Hong-bin, WANG Jie. Influence of Tool Vibration Characteristics on the Hole Roundness Morphology in BTA Deep-hole Drilling [J]. Acta Armamentarii, 2016, 37(6): 1066-1074.
[2]	ZHANG Liao-yuan, SHANG Ming-wei, ZHAO Yan, JIANG Da-lin, MA Kang-le. Study of Diamond Wire Saw Cutting of Carbon Fiber Composite Material [J]. Acta Armamentarii, 2016, 37(11): 2044-2049.
[3]	SU Chang-qing， SUN Ye-xiang， QU Li-gang， YE Bai-chao， YANG Ye-guang. Error Separation and Surface Topography Prediction of Shaft and Hole Based on Harmonic Theory [J]. Acta Armamentarii, 2016, 37(10): 1956-1963.
[4]	TANG Jun， ZHAO Bo. Stability Analysis of the Separated Longitudinal-torsional Composite Ultrasonic Milling [J]. Acta Armamentarii, 2015, 36(7): 1318-1325.
[5]	CHEN Jian, TIAN Liang , SHANG Hong-mo , ZHENG Deng-sheng, WANG Gui-cheng. Identification of Joint Part Parameters of HSK Spindle-toolholder Based on Closed-form Approach [J]. Acta Armamentarii, 2015, 36(7): 1309-1317.
[6]	HU De-jin. Study of Method of Sphericity Evaluation and Error On-line Compensation for Large Spherical Precision Grinding [J]. Acta Armamentarii, 2015, 36(6): 1082-1088.
[7]	WANG Fu-yuan, ZHAO Jian-she, TANG Lin. Research on Control Strategy and Fault Diagnosis Method of Multi-system for Electrochemical Machining [J]. Acta Armamentarii, 2015, 36(6): 1074-1081.
[8]	GE Ying-fei， XU Jiu-hua, YANG Hui. Chip Formation Mechanisms and the Process Model during Ultra-precision Turning of SiC_p/Al Composite [J]. Acta Armamentarii, 2015, 36(5): 911-920.
[9]	LIANG Zhi-qiang， MA Li-ping， WANG Xi-bin， XIE Li-jing， ZHAO Wen-xiang， YAO Hong-min. The Effect of Pulsed Magnetic Field on Friction and Wear Properties of High Speed Steel Tool Materials [J]. Acta Armamentarii, 2015, 36(5): 904-910.
[10]	GAO Hang， SUN Chao， RAN Chong， ZHANG Xin， LI Li-li. Drilling Experiment of Laminated Composites by Ultrasonic Vibration Assisted Helical Milling Method [J]. Acta Armamentarii, 2015, 36(12): 2342-2349.
[11]	SUN Jing, ZHENG Qing-yu, XU Wen-ji, HUANG Shuai, LIU Xin. Three-dimensional Reconstruction of Temperature for Asymmetric Plasma Arc [J]. Acta Armamentarii, 2014, 35(7): 1097-1102.
[12]	GENG Xue-song， CHI Guan-xin， WANG Yu-kui， WANG Zhen-long. Research on Material Removal Rate of SiC/Al Particulate Metal Matrix Composite by Micro-wire ElectricalDischarge Machining [J]. Acta Armamentarii, 2014, 35(6): 891-899.
[13]	LI Lun， LI Shu-juan， Tang Ao-fei， LI Yan. Vibration Cutting Analysis of Axially Moving Diamond Wire Saw Excited by Transverse Ultrasonic Wave [J]. Acta Armamentarii, 2014, 35(10): 1651-1658.