Three-dimensional Reconstruction of Temperature for Asymmetric Plasma Arc

doi:10.3969/j.issn.1000-1093.2014.07.025

Abstract

Abstract: Plasma processing technology has been concerned in the forming and preparation of various difficult machining materials. The temperature of plasma arc is the decisive factor of influencing processing quality. The most existing studies on temperature characteristic were completed under the assumptions of arc radial symmetry. In order to solve this problem, a three-dimensional temperature reconstruction method for asymmetric plasma arc based on gray value is presented. A three-dimensional model of asymmetric plasma arc appearance which has correlation with temperature field is established based on gray value. A blackbody furnace is used to calibrate the formula of colorimetric temperature measurement. The correspondence between gray value and temperature in the image of plasma arc is obtained by colorimetric temperature measurement. Finally, the temperature value is introduced into the appearance model to accomplish the three-dimensional reconstruction for the temperature field of asymmetric plasma arc. The results show that the method can descride the temperature distribution of the plasma arc and achieve the non-contact measurement of temperature field of asymmetric plasma arc.

Key words: manufaturing technology and equipment, image processing, asymmetric plasma arc, temperature distribution, three-dimensional reconstruction, temperature measurement, CCD image acquisition

CLC Number:

SUN Jing, ZHENG Qing-yu, XU Wen-ji, HUANG Shuai, LIU Xin. Three-dimensional Reconstruction of Temperature for Asymmetric Plasma Arc[J]. Acta Armamentarii, 2014, 35(7): 1097-1102.

References

［1］邵华, 朱丹平, 吴毅雄. 电弧等离子体温度场中Abel逆变换的数值算法分析［J］. 计算物理, 2005(5):431-436.
SHAO Hua, ZHU Dan-ping WU Yi-xiong. Numerical methods for the Abel inversion of temperature field in an arc plasma［J］. Chinese Journal of Computation Physics,2005(5): 431-436.(in Chinese)
［2］张杨, 金星, 王广宇, 等. 基于激光等离子体实验数据重建三维温度场的方法研究［J］. 装备指挥技术学院学报, 2010, 21(1)： 105-109.
ZHANG Yang, JIN Xing, WANG Guang-yu,et al. An method study on reconstruction of 3-D temperature fields based on experimental data of laser plasma［J］. Journal of the Academy of Equipment Command & Technology, 2010, 21(1):105-109. (in Chinese)
［3］ SUN Jing, XU Wen-ji, WANG Chun-yan. Characteristic analysis of plasma arc adjusted by a magnetic field［J］. Applied Mechanics and Materials, 2011, 44/45/46/47:1812-1816.
［4］张琳, 冯红艳, 吴蓉,等. 瞬态小尺寸等离子体的判断及光谱法表征［J］. 兵工学报, 2009, 30（11）：1435-1439.
ZHANG Lin, FENG Hong-yan, WU Rong,et al. Diagnosis and judgment of transient and small-size plasma with spectroscopic method［J］. Acta Armamentarii,2009, 30（11）：1435-1439. (in Chinese)
［5］张丕壮, 路宏年. 面阵CCD微光像感器图像的校正［J］. 兵工学报, 2000, 21(4)：361-363.
ZHANG Pi-zhuang,LU Hong-nian. The correction of image photographed by CCD image sensors［J］. Acta Armamentarii,2000, 21(4)： 361-363. (in Chinese)
［6］周颖慧.基于CCD图像传感原理的温度检测方法及应用研究［D］.秦皇岛:燕山大学,2010.
ZHOU Ying-hui. Research on the method and application of temperature monitoring and measurement based on the CCD image sensoring principle［D］.Qinhuangdao: Yanshan University, 2010. (in Chinese)
［7］孙元.基于CCD图像传感器的高温温度场非接触软测量研究［D］.长沙:中南大学，2007.
SUN Yuan. Research of the contactless soft measurement of high-temperature field based on CCD image sensor［D］. Changsha: Central South University， 2007. (in Chinese)
［8］李汉平. 黑体炉设计的讨论［J］. 激光与红外, 1984(7):29-31.
LI Han-ping. Discussion of blackbody furnace design［J］. Laser & Infrared,1984(7):29-31. (in Chinese)
［9］高魁明,王玲生,李丽杰.中温黑体炉结构及其有效发射率的计算［J］.自动化仪表,1985(2):14-17.
GAO Kui-ming, WANG Ling-sheng, LI Li-jie. Calculation of temperature blackbody furnace structure and effective emissivity［J］.Process Automation Instrumentation,1985(2):14-17. (in Chinese)
［10］郑庆余,刘新,孙晶，等.基于灰度值的非对称等离子体弧形貌的三维重建［J］.机电工程,2012,29(7)：750-753.
ZHENG Qing-yu, LIU Xin, SUN Jing, et al. Three-dimensional reconstruction for non-symmetric plasma arc appearance based on gray value［J］.Journal of Mechanical & Electrical Engineering,2012,29(7): 750-753. (in Chinese)
［11］蔡桂英,殷爱菡.光谱体层析技术诊断三维等离子体场［J］.光子学报, 2006,35(1):52-56.
CAI Gui-ying, YIN Ai-han. 3-D arc plasma fields reconstructions with self-adaptive emission spectral volume tomography algorithm［J］. Acta Photonica Sinica,2006,35(1):52-56. (in Chinese)
［12］邢键,万雄,孙晓刚，等.CCD光谱层析技术重建氩等离子束射流三维温度场［J］.光谱学与光谱分析,2009,29(11):3023- 3026.
XING Jian,WAN Xiong, SUN Xiao-gang, et al. 3D temperature field reconstruction of Ar plasma jet using CCD spectrum tomography technology［J］. Spectroscopy and Spectral Analysis, 2009, 29(11):3023- 3026. (in Chinese)
［13］ Xu G, Hu J, Tsai H L. Three-dimensional modeling of arc plasma and metal transfer in gas metal arc welding［J］.International Journal of Heat and Mass Transfer, 2008(52):1709-1727.

[1]	WANG Yan-hai, WANG Xiao-man, LI Yu-shan, JING Wen-bo, WANG Zi-he. Gun Slaving Speed Measuring Method Based on Image Perspective Distortion Correction [J]. Acta Armamentarii, 2016, 37(8): 1517-1523.
[2]	TAN Ke， ZOU Li-na. The Application of Normal Distribution Transformation Algorithm in Sonar Image Processing [J]. Acta Armamentarii, 2016, 37(6): 1052-1057.
[3]	KONG Ling-fei, NIU Han, HOU Xiao-li, LIN Hong-bin, WANG Jie. Influence of Tool Vibration Characteristics on the Hole Roundness Morphology in BTA Deep-hole Drilling [J]. Acta Armamentarii, 2016, 37(6): 1066-1074.
[4]	ZHANG Liao-yuan, SHANG Ming-wei, ZHAO Yan, JIANG Da-lin, MA Kang-le. Study of Diamond Wire Saw Cutting of Carbon Fiber Composite Material [J]. Acta Armamentarii, 2016, 37(11): 2044-2049.
[5]	SU Chang-qing， SUN Ye-xiang， QU Li-gang， YE Bai-chao， YANG Ye-guang. Error Separation and Surface Topography Prediction of Shaft and Hole Based on Harmonic Theory [J]. Acta Armamentarii, 2016, 37(10): 1956-1963.
[6]	WU Jian-ye， ZHANG Shuan-qin， YIN De-fei. Study of Digital Infrared False-color Imaging Technology [J]. Acta Armamentarii, 2015, 36(9): 1722-1726.
[7]	CHEN Jian, TIAN Liang , SHANG Hong-mo , ZHENG Deng-sheng, WANG Gui-cheng. Identification of Joint Part Parameters of HSK Spindle-toolholder Based on Closed-form Approach [J]. Acta Armamentarii, 2015, 36(7): 1309-1317.
[8]	TANG Jun， ZHAO Bo. Stability Analysis of the Separated Longitudinal-torsional Composite Ultrasonic Milling [J]. Acta Armamentarii, 2015, 36(7): 1318-1325.
[9]	MI Zhao-yang， LIANG Zhi-qiang， WANG Xi-bin， ZHOU Tian-feng， ZHAO Wen-xiang， TIAN Meng. A Simulation Investigation on Grinding Forces in Ultrasonic Assisted Grinding of Ceramics with Single Abrasive Grain byUsing SPH Method [J]. Acta Armamentarii, 2015, 36(6): 1067-1073.
[10]	WANG Fu-yuan, ZHAO Jian-she, TANG Lin. Research on Control Strategy and Fault Diagnosis Method of Multi-system for Electrochemical Machining [J]. Acta Armamentarii, 2015, 36(6): 1074-1081.
[11]	HU De-jin. Study of Method of Sphericity Evaluation and Error On-line Compensation for Large Spherical Precision Grinding [J]. Acta Armamentarii, 2015, 36(6): 1082-1088.
[12]	PAN Yue， XU Xi-ping， ZHANG Fan， JIANG Zhao-guo， QIAO Yang， LI Yan-di. Calibrator Automatic Calibration System for Headlamp Tester of Motor Vehicle Based on Image Processing [J]. Acta Armamentarii, 2015, 36(5): 861-868.
[13]	LIANG Zhi-qiang， MA Li-ping， WANG Xi-bin， XIE Li-jing， ZHAO Wen-xiang， YAO Hong-min. The Effect of Pulsed Magnetic Field on Friction and Wear Properties of High Speed Steel Tool Materials [J]. Acta Armamentarii, 2015, 36(5): 904-910.
[14]	GE Ying-fei， XU Jiu-hua, YANG Hui. Chip Formation Mechanisms and the Process Model during Ultra-precision Turning of SiC_p/Al Composite [J]. Acta Armamentarii, 2015, 36(5): 911-920.
[15]	GAO Hang， SUN Chao， RAN Chong， ZHANG Xin， LI Li-li. Drilling Experiment of Laminated Composites by Ultrasonic Vibration Assisted Helical Milling Method [J]. Acta Armamentarii, 2015, 36(12): 2342-2349.